UPDATE:  Price dropped to $2150

(08/24/09)It’s bit rough.

“1954 Willys Jeep CJ 3B, Runs and drives, Pretty much all stock, their are some add on’s, Has the factory seats and some extra parts, Original floor boards in good shape, This would make an excellent restoration CJ 3B, Asking $2150.00 OBO, If interested please call shawn at 503-8693495.”

http://portland.craigslist.org/nco/cto/1588207978.html

UPDATE:  Price dropped to $1400

(12/16/09) “Vintage antique Jeep. Bought this project 5 years ago. The motor has been rebult top to bottom by Rodney’s Machine Shop- Jarretsville MD, new gas tank, new brakes, suspension totally redone including the four leaf springs-shocks etc. and complete exhaust system. Just put new battery and solenoid in it. Needs body work, new seats etc. Hood and rear Willys gate in great condition. Have spare steering column with a original Willys steering wheel in excellent condition that comes with it. Great project vechicle for the Jeep enthusiast or ????? Valid Maryland Title. Have $2,700 in it and will let it go for $1,400 firm or the highest bidder. Call 443-831-9045 or email questions or inquiries.”

http://baltimore.en.craigslist.org/cto/1585919100.html

UPDATE: **SOLD** Was $1200.

It runs.  This looks more like a chariot than a jeep 🙂

“I am selling my Willys Jeep. I bought it as a rock crawling project, but I am not able to finish. It has the original F-Head engine, with oil bath air filter. It starts right up and runs great. It has a 3 speed transmission with a Warn overdrive. New parts that I installed include: coil, distributor, and plugs. I have other new parts which are included but haven’t installed: master brake cylinder, all new brake cylinders and all small parts to rebuild the brakes. Also, new choke line, plug wires, oil filter, and fan belt. I also am including a chain assisted clutch linkage from Advanced Adapters, as the old clutch linkage is worn out.

The brake lines and fuel tank need to be replaced. The grill and hood are Willys stamped and have minimal/no rust. Tires hold air and have good tread. Roll bar is also included.
This jeep would make a great parts vehicle or as a foundation for a rock crawler.
http://i872.photobucket.com/albums/ab289/bedford_bucket/IMG_1196.jpg
http://i872.photobucket.com/albums/ab289/bedford_bucket/IMG_1194_1.jpg”

UPDATE: **SOLD** Was $1500.

“1953 Willys 3B jeep project. Son had lofty plans to restore. Started to dissassemble, now is off to college and I NEED THE GARAGE SPACE. F-head motor, mechanically complete. Jeep was as a driver before dissassembly started. Have extra additional body parts including complete grill, windshield frame, hood, cowl, fenders plus new set of omix-ada fenders. Clear CO title. $1500 OBO.”

Here is a seller parting out a CJ-3B.

“Jeep 3B parting out everything goes V-6, T14, transfer case, front and rear end, body parts and metal top. Rough shape but it is a 3B Make offers.  503-557-8911.”

http://portland.craigslist.org/mlt/pts/1576621546.html

UPDATE: **SOLD** Was $2700

(12/20/09) There’s been a few mods to this.

“im selling a 1955 willy’s jeep cj3b, it has a buick 3.8, rebuilt last year. it has the original 3 spd. tran’s and transfer case, it also has dana 44’s with 538 gears, locked in the rear with a quick lock. i upgraded the clutch slave cyl. and brake cyl. to a 2000 jeep style. the body is very clean and all steel, i also added the seats. it runs great and will go almost anywhere.i also have a hard top and doors i have never had them on so i dont have a pic. if you like what you see or have any questions please dont e-mail having problems with it”

UPDATE: **SOLD** Was $3900

(12/17/09) It looks good.

“Dana 44 in rear 3.73 with a locker,dana 30 in front with locker,304 AMC,T-15 trans,dana 20 transfar case.The jeep is in good shape.”

UPDATE:  Price dropped to $800

This might be a pretty good price.

“No title, flathead 4 cyl. Had running 3 years ago. No starter, windshield glass or bumper other than that it is complete. 800 obo. Would consider trade. Call Scott at 660-265-5741”

http://kansascity.craigslist.org/cto/1572220349.html

UPDATE: **SOLD** Was $1500.

There might be some value here.  It’s got a PTO Winch. The body looks rough.

“Restoration potential. Body has usual rust spots but all could be restored. I was told the F134 has rebuild top. It runs but the gas tank was bad so it was started fro an external can. Standard 3-speed T90 shifts easily. Has PTO Ramsey winch. There is no top and the windshield goes onto another jeep, so thats not included. It has one seat as shown. The wheels are good and tires about a third left. There is an extra rolling frame that must go with the jeep. sorry but WILL NOT PART OUT & NO TRADES.”

UPDATE:  This is/was listed as a CJ-3a, but is really a CJ-3B. Pics now listed also.

“I have a 1950 cj3a for sale or trade let me know what you have THE JEEP IS NOT RESTORED BUT DOES RUN AND DRIVE”

http://desmoines.craigslist.org/cto/1573052158.html

UPDATE:  Still available

(11/17/09) This seems like a good price given the condition of the body and the lockers. Hmm … there aren’t any seats that I can see.  I wonder if this is a more of a project.

“Selling my 1954 Willys Jeep. Has 4 inch lift, V6 with automatic, lockers front and back with lockouts front and back for towing, 5:38 gears, and power brakes. The body is very nice. Call Jim 920-864-7397 anytime after 2 p.m.”

http://greenbay.craigslist.org/cto/1567088350.html

UPDATE: **SOLD** Was $1500

“1953 CJ3B Jeep. Ford v-8 289 Engine. Body straight, no rust. Needs to be remodeled. Last time it ran was 30 years ago. We have all the body parts and some. She was a beauty 30 years ago and is in need of someone loving her and putting her back together again.”

UPDATE:  Price dropped to $4900

(12/25/09) I’m not sure why someone would use a GPW frame on a build like this?

“new body on ford jeep frame thats been boxed in and beefed up. has a fresh chevy 350 with cam intake carb and a few more things. has a for toploader 4 speed with advace adapters kit and dana 20 transfercase. has narrowed up 3/4 ton running gear. has a 4in lift and sring over lift clears 38’s. has 36 in irok radials ont it right now runs great and drives great has power brakes and hydralic throw out bearing for easy pushing has a stage 3 center force clutch. and lots more needs a paint job and some wiring body is almost perfect shape way to much to list lots invested call for more info 541-290-9969 $5500 obo or will take part trade for a late 70’s ford regular cab 4×4 or early to mid 90’s dodge with cumins parts or whole wrecked or not”

http://oregoncoast.craigslist.org/cto/1524467129.html

UPDATE: **SOLD** Was $3000.

This seems a bit high for a project. It’s hard to tell what’s all included though.

“Buick V6 Motor. Very Clean Body Ready for completion.”