UPDATE:  **SOLD** Was $600.

(07/08/2011) It’s a project.

UPDATE:  **SOLDO** Was $1250

(06/03/2011) This needs work.

“getting to be kind of a rare one 1956 cj6 yes the long one 4 cly f head typ 3spd trans twin stick transfer it runs and ive drove on our land a little the 4×4 seems to work windshield frame is good no tops some one had plated the back floor see pic NO SEATS the org gas tank is in it but some has added the one you see in the pic brakes work if you pump them up tires are shot SOLD AS IS WHERE IS BRING YOUR TRAILER have a clear title ava for it were up near scottsbluff nebraska zip code 69361 2400.00 cash no trades”

UPDATE:  Price dropped to $700

(05/20/2011) Apparently, this runs, sort of.

“I have for sale a nice Jeep CJ6. A CJ6 has the same parts as a CJ5, but is 20 inches longer. Ideal to make a Scrambler which is only 2 inches longer. Jeep has 4 cylinder F head 3 speed. Very nice tires, two (2) extra front fenders and a very nice extra windshield frame with glass. No front seats, no battery, but has a back seat if wanted. Also has a rollbar (not pictured). Jeep runs with a temporary electric fuel pump which I removed and purchased a new manual pump (not installed) Jeep ran off of a fuel can, but a good fuel tank is included. Good title. Need more pics or have questions no problem. Can be seen at 6917 Rt 152 6185423668. Reasonable offers considered. Possible trade for a early to mid 60’s Ford truck. UPDATE//////// INSTALLED THE FUEL PUMP THIS MORNING, RUN HOSE INTO A JUG, JEEP KICKED RIGHT OFF AND RAN NICE. JUST NEEDS HOSE RUN TO FUEL TANK. BRAKES NEED WORK BUT RUNS AND DRIVES”

http://carbondale.craigslist.org/cto/2411801039.html

UPDATE: **SOLD** Was $3200.

I’m not sure if that is paint or stickers on the side.

“1960 Jeep Willys CJ6 – Rare and unusual Jeep – we have owned this Jeep for over 20 years. It does everything – rock climbs and hill climbs. This is a special Jeep – my wife is making me sell it. 283 Chevy motor, 4 speed, stock axles,35 front, 27 rear”

Brian spotted this CJ-6 which looks like a good price.

“1965 CJ6 Jeep. Perfect Project to Restore or for Off Road Truck Enthusiasts.
Needs a Good Home! Call for details! $2500.00. CALL 517-719-2603 (Serious Inquiries Only)”

http://lansing.craigslist.org/cto/2308862944.html

UPDATE: **SOLD** Was $1500.

There might be some value here.

“1958 CJ 6 Willys Jeep. It needs a new brake master cylinder. Newly upholstered seats. Original F Head Motor that runs. Full roll cage. Rust for age. Have too many toys must go. Already have an offer of 1200.00 so don’t offer less. Currently non op. Have paper work.”

It sure looks like a  lot has been completed on this project.  Get the body built and you’ve got a nice CJ-6.

“THIS IS A VINTAGE 1964 KAISER/WILLYS JEEP CJ- 6 ,THE CHASSIS HAS BEEN SAND BLASTED AND COATED WITH POR-15, ALL THE BRAKE,SEALS, LINES,HOSES HAVE BEEN REPLACED, NEW FRONT SPRINGS, BUSHINGS,NEW TIRES.NEW STEERING WHEEL,U JOINTS + MORE. THE ENGINE WAS REBUILT SOME YEARS BACK, I CLEANED IT AND INSTALLED NEW GASKETS, PLUG WIRES, REBUILT THE CARB, POR ON THE EXHAUST. THE TRANS AND TRANSFERCASE HAVE BEEN GONE THRU. THE BODY IS THE BIGGEST PART LEFT, IT IS ALL SAND BLASTED, I HAVE NEW FRONT SIDE PANELS, THE REAR NEEDS TO FINISHED, PARTS ARE AVAILABLE. I HAVE A TON OF PARTS FOR THIS, MOST ARE ALL SAND BLASTED, AND OR PAINTED. THE CJ-6 ARE MORE RARE BECAUSE MOST WERE EXPORTED. I DON’T HAVE THE TIME TO FINISH IT. I DO HAVE A CLEAN TITLE. SOLD AS IS… PLEASE ANY ?”

http://wausau.craigslist.org/cto/2252078896.html

UPDATE: **SOLD** Was $2500.

Work has been done, but more to do.

“Very solid, V6 heaters, SM 420 trans, disc brakes p.s., frame is boxed and perfect, brand new springs/shocks/shackles, body is ready to paint, likes very little to finish. I have seats and belts $2500.”

UPDATE: Price dropped to $2100

(01/12/2011) It drives, stops and needs work.

“1956 Willy’s CJ-6 Jeep for sale $2500 or make a reasonable offer It drives and stops; current registration and clean title Pretty much all stock except for the engine
This came off of a farm in Iowa where it was used as a farm vehicle off road for the past ten years. Goes anywhere, great off road vehicle.
Engine is a V-8 Chevy 283 Cu.In., 12 volt system, SEARS brand locking front hubs, 3 speed transmission, 4 speed transfer case(4high 2high N 2low 4low), 5.38 stock gears, 4 wheel drive works great, good tires 31×10.50x15R.
Body is fair, front fender damage. Floor is fair, has some see through areas but fixable.
Removable windshield included, will need glass replaced. Upholstery damaged, original steering very loose, speedometer is broke. Mileage unknown reads 65085, has excellent custom made heater. No top. Rear lights replaced in November 2010. Headlights replaced December 2010.
Not too many of these running around. Possible restoration candidate, suitable for hunting, ranch, farm or possible rock crawler build!
1956 Willys CJ-6 w/ Chevy V-8 283 cu.in Clear Title. Price: 2,500 OBO”

http://seattle.craigslist.org/tac/cto/2197556266.html

No pics.  This appears to be a very early CJ-6 (#35).

“First production year CJ6, one of 2224 from 56. Bought this as a trail rig project, but don’t have the heart to tear it apart. Stock F head/T-90/model 18(twin stick). Motor runs but needs flooding carb repaired/replaced ( have replacement carb should be on this week). This was a eastern Oregon/Washington rig, and that is reflected in the lack of rust. Bench seat needs recovered, but is in it. Front floor pans are clean (both follr pan supports have about 3-5″ of rust through, and rear pan is clean, but saggy in places (this was a farm truck), tool box seems to be clean. Rear gate is dented, and gate frame is cracked, both front fenders are dented. PO had welded reinforcement stock on front horns. Has a Ramsey front PTO, and shaft, but no winch. Also has a Koenig half cab steel hard top, with doors. Top has had about 5 inches of weld repair performed ( to driver side windshield mount, and both driver and pass side rain channels) and has some surface rust, but no cancer. Doors are sliding window models, and are both missing bottom hinges, and are in need of latch repair. Neat old rig, vin # ends in 10035, I believe this to mean it was #35 off the line, when production of the 6 started in late 55′. Will not have a title in my hand for a week or two, but thought I would put some feelers out, and see if there was any interest from someone who would restore it. Pics avail upon request.”

http://portland.craigslist.org/mlt/cto/2152079233.html