UPDATE: **SOLD** Was $500.
Not sure hw much value is here. The head looks military.
“1946 Willy’s Jeep engine and Transmission, plus the Front and Rear axles complete..
Engine spins freely…
Good or rebuild…
All for $500 cash or make offer…”
UPDATE: **SOLD** Was $500.
Not sure hw much value is here. The head looks military.
“1946 Willy’s Jeep engine and Transmission, plus the Front and Rear axles complete..
Engine spins freely…
Good or rebuild…
All for $500 cash or make offer…”
There should be some value here.
https://bellingham.craigslist.org/pts/d/bellingham-1946-willeys-flat-head-and/6782981230.html
“I have a flat head, transmission and transfer case out of a 1946 willys jeep.”
UPDATE: **SOLD** Was $250.
” Willys L-head four cylinder engine was removed from a Willys Jeep CJ3A. This will also fit in the CJ2A, M38, WWII MB and GPW, and some early Willys Wagons and Trucks. This one has been in dry storage for about a decade. It used to turn over years ago while it was in the shed, but I can’t seem to get it to turn over at the moment, and I don’t want to force it. R
emoving the head, I see what looks to be normal wear to the cylinder bores with a slight ridge on the top, and the pistons are currently at 0.040 over, meaning that it can still be machined out to 0.060 when rebuilt. It has a Jasper Factory remanufactured engine tag on the side of it, so it had received a rebuild at some time in the past. No signs of cracks or damage on the block, but I do see that the exhaust manifold does have a large crack. The intake looks to be in good condition. Will include everything shown, plus I may also have a working starter and an untested generator to include with it as well. Please let me know if you have any questions.”
UPDATE: Seller claims this as a Buick 231 V6, but it’s something different.
TJ shared this one. It’s a good price.
https://www.facebook.com/marketplace/item/2189855531101835/?ref=messenger_share
“Buick 231 odd fire engine. DOES RUN!!! Was bought for a jeep project but went another direction”
Andy shared this ad. Looks like a good price.
https://www.facebook.com/marketplace/item/285681955559450
“Runs great”
UPDATE: **SOLD** Was $500.
Engine spins.
“1947 Jeep Willys CJ2A Go Devil L-Head 4 cylinder engine. I don’t have any of the details on the motor because we just purchased it and we are going a different route with the drive train. Everything seems to be in place. It is not locked up and does turn over. We were told it ran a few years ago when we bought it but we never planned to keep it. Also, the tub is available if anyone needs parts to repair another tub. It has the normal rust spots and I didn’t want to deal with fixing them.”
UPDATE: **Sold** Was $800.
I wonder if this was an industrial engine.
“Flathead 4 cylinder Willy’s Jeep Engine, WW2 vintage. This engine starts on its own with just being choked (no other starting aids needed). Oil pressure is good, and there are no knocks, or crankshaft “Chuggle”.
The compression of this engine is 75-90 psi, and it can still carry a load (it was the powerplant for a functioning welder). There are traces of olive drab paints on parts of the engine, and the timing cover has the rivet in it that wartime Willy’s had. The serial number of the engine is MB546645. The additional numbers on the engine block are 1-11, 638632W2 A, and NI-CR N2 ( designators for a nickel-chromium iron block alloy; for those of you who don’t know, this hardened block material is one of the reasons that these engine run forever).
I believe that this engine could be dropped in and ran as-is for quite some time, or it would be an easy one to freshen-up with piston rings and a valve job. I prefer cash as method of payment. The engine is currently palletized, and is available for local pick up, or shipping arranged by the purchaser. These engines are not getting any easier to find, so even if you have a good engine in your Jeep, it might not be a bad idea to have a spare.”
UPDATE: **SOLD** Was $100.
Good price. It would make a great “Allstate” Jeep project.
“Pulled this Allstate L161 out of a CJ2A Willy’s Jeep. Definitely not original to the CJ2A. My best guess is this from a Willy’s Jeep Station Wagon or Henry J from the early 1950s.
The casting on the top: ALLSTATE, 6L161
Block Casting: 741878-2
It has run in the past; just been a project car for years and decided to go with a newer engine.”
UPDATE: **SOLD** Was $850.
Someone could use this.
“Original L-134 Engine. Pulled out of a 1947 CJ2A. Comes with original Carter WO Carburetor. Have an extra solex carb. I have installed a new head gasket, spark plugs, electronic distributer, coil, and water pump. Was running when pulled.”
No pics provided.
https://lewiston.craigslist.org/pts/d/1940s-4-cylinder-willys-jeep/6737728809.html
“(5) 4 cylinder 1940’s Willys jeep motors completeness varies.call for details”
UPDATE: **SOLD** Was Make Offer.
If this were closer, I”d be interested in it.
“I have a Buick v6 that came out of a willys cj 2a jeep. It had all the fancy high performance aluminum Offenhauser intake, valve covers (and other high performance bells and whistles) and Holly carb,. it was bolted up to the T90 so you can bolt it up to your T90 trans. If interested email me, come look and make me an offer. I have the motor mounts for the frame for it a well. I have been saving this for the past few years but running out of time, to many projects”
UPDATE: **SOLD** Was $150.
Ran, but smoked.
“The engine was running before it was pulled out. However it did smoke and it will need to be rebuilt. Turns over freely.”
UPDATE: **SOLD** Was $150.
Maybe someone can save this one.
“Appears to be out of a US Army jeep pre 1950’s. It’s all here, from the fan to the clutch including the bell housing. Didn’t magna-flux it, but can’t see evidence of any cracks in the block or head.”
UPDATE: **SOLD** Was No Price.
Could be a good price. Seller doesn’t want to scrap.
“Trying to find this a home before it goes to scrap.”
Bob Christy was forced to moved his event to last Sunday, which worked out pretty well, as the weather was perfect (unlike the rainy deluge of last weekend). Here are some photos, including a few with folks wearing Alaska Or Rust shirts:
UPDATE: **SOLD** Was $500.
Doesn’t run at the moment.
https://greatfalls.craigslist.org/pts/d/1944-wwii-military-army-jeep/6698683120.html
“For sale military jeep engine removed from a 1943-ish jeep complete. Not running.”
UPDATE: **SOLD** Were $400.
I don’t know if it is $400 for both or $400 each.
“2 willys 134 flat heads for sale”
Brody has this evening for sale on eBay.
View all the information on ebay
“1956 Willys 6 cyl -226 flathead Super Hurricane. It has not run while in my possession though it does turn over freely. Used. Sold As Is.”
Roger Martin has some stuff he’s like to sell. It’s best to contact him via phone: 937-477-5270.
Here are some pics. The MB Marine engine:
1944 MB Engine:
GPW Engine:
UPDATE: **Status Unknown** Was $1795.
Given the serial number, it seems more likely to me this is an early ’46 based on this chart.
“This is a rebuilt 1945 CJ2A motor. #12211”
UPDATE: **SOLD** Was $600.
It ran many years ago.
“Complete 1940’s Ford GPW engine, current head on engine was a replacement that I installed many years ago. I would like to keep the generator unless its GPW specific.
I installed this in my ’47 CJ2A many years ago, then found out that it was a military engine. Figured it would be a better fit for someone looking to restore a GPW ”