Nice Truck with an unusual hood.

“1962 Willys Jeep Pickup
Small Block 400 and Turbo 350 transmission. 4 Barrel Edelbrock Carburetor. Factory Transfer Case with PTO. 9.5″ Suspension Lift. Reinforced Factory Frame. 35″ BF Goodrich All-terrain Tires. Factory Dana 53 Rear Axle. Factory Military Dana 27 Front Axle. New Hubs and Bearings on Front Axle. New Brake Shoes and Vacuum Canister to compensate for high performance cam and give the truck more stop. (Front brakes currently need new wheel-cylinders.)”

View all the information on eBay

UPDATE: **SOLD** Was $6250.

Walter spotted this good looking truck.

“Rare truck right here, not fixed up real fancy, just a nice driver truck. It has a 283 power pack Chevy engine with 3speed manual transmission. It drives good & tight. Nice wheels & tires, the interior looks really nice, just a good ole truck.”

UPDATE: Was $13,000. **SOLD**

(11/19/2010) This looks real nice.

“1959 Willys 4×4 stake-bed truck with clean title. Blueprinted 350 Chev engine with 350 Chev turbo transmission. GoodYear Wrangler (RWL) MT/R 33×12.5 tires on American Racing alloy rims. Over $13,000 invested–must sell–please come and check it out.”

UPDATE: **SOLD** Was $4200.

This looks good, though the bumper is a bit wide.

“Red 1947 Willy’s Pick-up small block Chevy V-8 with Automatic Transmission. Fast and fun to drive, all new brakes, new high volume oil pump, flywheel, starter, alternator, water pump and timing chain and gears. 4,200 or best offer.”

Dan spotted this nice truck.

“53 Willys resently painted,a/c p/b, p/s,tilt wheel.warnen od.350 4bolt main.Please contact Rusty at (602)909-3030.Please no texting.Call between,8am-6pm thank you”

http://phoenix.craigslist.org/cph/ctd/3400386554.html

UPDATE:  Still Available

(09/26/2012) This looks nice. It is built on a Scout frame.

“For Sale 1947 Willys pickup
Built on a Scout Frame
Less Than 4000 Miles on Build
400Small Block
Turbo 350
New wheels and tires
Tinted Glass
GM Tilt Steering column
Cross Flow Radiator
New Rancho Suspension Lift
Custom Built Bed
Dynoflow Exhaust System-Block Hugger Headers
New interior W/ Fiero Bucket seats
New Oak Wood bed
New Wiring
Disc front Drum rear
Call Gil @ 510 760 9936
Very Reliable Truck”

http://sfbay.craigslist.org/eby/cto/3423923845.html

UPDATE: Was listed on eBay.

“1954 Jeep Willys 4wd Pickup Truck, This Is A Great Custom 4×4 Less Than 50 Miles On New 302CI Ford Engine New Alternator New Water Pump New Custom Radiator New Starter New Electric Chock New Coils / Wires New Belts, Hoses, Cables New Customer Battery Box New Wiring Throughout Vehicle New Blinkers, License Plate Lights, Oil Temp, Water Temp, RPM Guages (Fuel Level / Speedometer Not Functioning) New Floor Pan New Exhaust System New Brakes & Brake Lines New Custom 9″ Ford Rear 4 Barrel Holley Carbuerator Completely Rebuilt & Tuned Ford T-18 4speed Ford Model 18 Transfer w/Hi Lo Stock 25 Front 5.38 Gear Confer Leaf Springs Lift Kit 4WD Works So many more upgrades & restoration points than can be listed here.”

UPDATE: **SOLD** Was $11,500.

“Very nice 1961 Willys Pickup for Sale. We absolutely love this truck, but due to health reasons we must sell it. We get a lot of attention when we take it to car shows. Here are just some of the details about this truck:

350 Tuned port engine
Camaro Front Clip
Hideway antenna
Electric doors and windows
Sprayed on bedliner
All new wiring
Tilt Steering Wheel
Crager Wheels
Vintage Air/Heat
Good interior”

Dan spotted this truck.  It appears in good shape.

“1959 Willys Truck Run Great Super Quiet! 4×4
5 Brand New Tires Lots of Detail work already Done!
Restore to the final level or put it to work!
New Rear glass ! Check out the Hurricane under the Hood!
Make an offer! Call Steve 760-521-7777”

http://sandiego.craigslist.org/nsd/cto/3372823176.html

UPDATE: **SOLD** Was $4000.

“Willys Truck (1960) Sits on a shortened Ford F150 4×4 frame and running gear. Motor is machine shop rebuilt fuel injected 5 liter (302). Trans is Ford AOD rebuilt at Norcal trans. A few of the features are a shortened bed, Mazda pickup rear sliding window grafted in, 280ZX hood inserts, custom headlight housings, minivan back seat serves as the truck bench seat and more. There was a fair degree of customization to the truck, however the motor, except for a necessary .030 bore increase at the machine shop, and the tranny was kept as stock as possible for durability’s sake.

I finished the truck around 5 years ago. I never used it a lot, but 2 ½ years ago it began to sit while I looked for myself a house. Now I’m in my house and it’s parked in my garage going to waste. The truck runs and drives and 4wheels very well but it needs some of the aftermarket mistakes and design mistakes I made, corrected.
There is less than 13,000 miles on the rebuild. Nothing was wrong, I just found that I am more interested in building the stuff than using it.
The paint needs re-done. I cheeped out on the paint and it didn’t survive the snowy winter that it set out side while I finished my garage. It needs a window replaced, replacement aftermarket power windows installed (I have new replacements), and aftermarket windshield wiper motor replaced (I have the new replacement). This should be considered a project truck as it has things to fix. The pic was taken approx 4 years ago.”