UPDATE: **SOLD** Was $3999.

Seller will not ship. This is supposed to run, but it does need work.

“I have a 50 willys that I put a 350 into. Fresh motor with 2500 miles on it. I spent more than this on the motor. Never bored truck block with high Nickle content. Four bolt mains. Large cam. Lunati Roller Rockers with 3/8 bolts. Flat top pistons. Edelbroch intake with a Holley mechanical secondary 750 carburetor. With Camel hump heads. 2.02 1.60 valves. MSD ignition and distributor.

I have more into this motor than I am asking. Buy the motor and get a free truck. I started putting the passenger floor into it and haven’t had the time to finish. It needed the rockers replaced, and you know how that goes. you have to cut back until you get good metal. Made custom brackets to put in a rear seat out of a 70’s wagoneer. Mounted a custom seat to the original tracks on the drivers side. re-wired the whole truck. It’s been untouched now for two years. Before it deteriates, I want to pass it on. Continue reading →

If the rest is as straight as the back, it’s worth a look.

“Willys panel truck. Was set up for SBC in past. No motor or trans at this time. Rust free body in great shape for year. Will make a great custom. Been in storage for a long time it is a project I’m not able to finish.
Hard to find classic great project. Black truck is what this will look like when finished.
I will try and post more pictures when I roll it out of my storage compartment.
This wont last long my loss is your gain. Try and find one without rust for this price.”

https://lasvegas.craigslist.org/cto/6197570020.html

UPDATE: **SOLD** Was $11,500

The photo sure looks vintage (too bad the new trucks are in the background).

“1956 willys wagon. Chevy 350. T90 3 speed with dana 18 transfer case. Dana 25 up front and dana 44 in back. Dual exhaust. Runs great. Transfer case needs some work. Aside from that, everything functions as it should. Frame is excellent. Body looks good but has some areas that need work. Interior and wood is good. Great buggy that turns heads everywhere it goes. Make an offer”

The wagon doesn’t run, but looks fairly solid. Even more interesting, the seller has a bunch of old Dodge trucks for sale, too.

“1955 Jeep 4×4 Station Wagon, this is a great project truck, rat rod, or needs re-powering. It has the 6 cyl. Hurricane engine (not running), orig 4 spd trans, a nice desert truck with very little rust, orig. bumpers, rims and seats, Calif. title w/non-op, $2250. I do have an extra driver door, upper tailgate and two front fenders for sale separately. Also engine & trans parts.

I have 30 old Dodge trucks in various states of condition. Some are running…and others just about ready to start. I also have a rolling M37 frame w/ some body parts & front fenders. I’m parting out trucks and other complete project trucks are for sale. Let me know your part needs…..body parts, engines, transmissions, axles, brake drums, starter, generator, radiator, fenders, running boards. I can send you my list w/pics of trucks-description-price…….just send me your email address.”

https://sacramento.craigslist.org/ctd/6195257396.html

UPDATE: **SOLD** Was $1750.

Not sure how much value is here, but the body looks in decent shape. Engine has been disassembled.

“61 willys panel—chevy V8—motor apart—-trans & transfer case gone—-4×4—good tires—bill of sale-”

UPDATE: **SOLD** Was $3850.

Craig shared this one.

“Panel wagon, 350 v8 chevy and 350 auto, runs and drives , needs some fine tuning , but turns alot of heads, all offers concidered, ?

PLEASE FOR POSSIBLE TRADES ATTACH PHOTOS, AND INFO TO EMAIL! I WILL NOT CONSIDER OTHERWISE, ?”

UPDATE: **SOLD** Was $3500

Looks like there’s value here.

“I have a nice 1961 Willys Wagon. It is. A nice driver by no means a show car. It has rust in a lot of places but looks so cool. Has a Chevy 6 cylinder with HEI ignition,has a turbo 350 trans and a Ford rear end. It is still on the original frame. Has nice duel exhaust. Rust and drives good. Gets a lot of attention. Interior has been redone and is very nice,no headliner. Needs a new headlight switch . Heater works. Turn signals work. Breaks are good. I also have with it a 1963 Willys Wagon for parts for the 61 or you can go the other way. The 63 is on a blazer frame with a small block in it and the blazer drive train. Very good body but does have rust in some areas”

Is that an air conditioner under the dash on the driver’s side.

“1963 Willys wagon. All original. 6cyl Runs good. Tires good. Will consider trades for newer Jeep of equal value.”

https://twinfalls.craigslist.org/cto/6170030902.html

UPDATE: Price dropped to $1800.

(04/08/2017) It’s a project.

“Up for sale is a project 1956 Willys panel truck. Have lost interest in it. I started to tear this down and have most of the parts that came with it. Asking $2200 obo. No title only bill of sale. Someone come get this Unique and rare truck”

https://norfolk.craigslist.org/cto/6164928310.html

UPDATE: **SOLD** Was $1500.

Looks like there’s value here.

“1949 Willys panel,M11 r+p ,Chevy rotors ,sbc motor mounts, body rough in rear corners and front floor! Also have hood and other parts,complete p/u body/frame apart but good sheetmetal;same price. Have a window wagon for parts! no motor/trans”

UPDATE: Still Available.

(02/09/2017) Needs some rust repair.

“Runs drives and stops. Engine is leaking coolant into oil. It may just need a head gasket but she found a nicer one so this one has to go. It is a mostly complete Jeep Willys wagon with the straight 6 engine & munual trans. 4 wheel drive. It will need floor pan repairs. The front drive shaft is missing. I don’t know why, it was missing when she bought it.
Project jeep Willys Overland
I am Happy to awnser Questions about the vehicle. If you can see the listing then it is still for sale. Post will be deleted when sold.
Thanks, Make an offer, the worst that will happen is I will say no.”

https://columbus.craigslist.org/cto/6162872307.html

It has a non-running 283, but looks like a good start to a restoration. Body appears straight and seems to have only some light surface rust.

“Selling my 1963 willys wagen. Clean title on hand. It has a 283 chevy and original transmission, 4×4. The willys has all windows and all chrome, interior is complete no tears, very superficial rust NO RUST wholes. Very rare vihicle and hard to find in the condition that mine is in. The wagon is Not running, title on hand, no ebay, pay pall, or shipping. I do not need help selling it. Price is 3800 o.b.o cash offers on hand.”

https://elpaso.craigslist.org/cto/6129962267.html