To Top

1957 CJ-5 West Valley, Ut $1500

October 27, 2009 • CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.
0

It needs a starter (according to the seller), but is otherwise good (well, at least that is implied).  The price seems right.

“1957 willys jeep cj5 has a small block 350,dana axles 3 speed willys tranny lift kit supper swampers spare to match 30×9.5 50r15 has 570 miles on jeep sents been built just needs a starter to run also comes with a high lift jack and a big winch on the front any questions on it call brian at 801-598-8757 looking to get 1500.00 obo”

http://saltlakecity.craigslist.org/cto/1440393059.html

1957_cj5_westvalley

 
To Top

1950 CJ-3A Hotsprings, Mt eBay

October 27, 2009 • CATEGORIES: CJ-3A • TAGS: . This site contains affiliate links for which I may be compensated.
0

This appears mostly stock.

“YOU’RE BIDDING ON A 1950 CJ3A IN GOOD SHAPE, STOCK AS A STOVE.  MOTOR HAS LESS THAN 10 HOURS SINCE REBUILD. NO OIL LEAKS. NO GEARBOX WHINE. 12VOLT. GOOD TIRES WITH 50% WEAR. DOOR VINYL REFURBISHED. TOP NEEDS REPLACEMENT.”

View all the images at eBay

1950_cj3a_hotsprings

 
To Top

1952 M-38 Long Prairie, Mn eBay

October 27, 2009 • CATEGORIES: M-38 • TAGS: , . This site contains affiliate links for which I may be compensated.
0

This looks well maintained.  The top has at least one sizeable hole in the back.

“1952 JEEP WAS TOLD IT WAS SAME AS MILITARY IT HAS FLATHEAD FOUR JEEP MOTOR 3SPD TRANS WITH HIGH LOW AND IN OUT 4X4 TRANS CASE THIS VEHICLE RESOTRATION IS 6 YEARS OLD IT HAS SOME FLAWSA IN PAINT BEHIND FRT FENDER PAINT HAS 2 SPOTS THAT NEED TO BE FIXED FOR A PERFECT PAINT JOB AND AS YOU WILL SEE IN PICS THE INTERIOR IS NOT DONE ANDREAR WINDOWS IN SOFT CAB NEED TO BE REPLACED.  NOW FOR THE GOOD STARTS GREAT IDLES PERFECT ACCELERATES WELL SHIFTS GOOD CLUTCH IS GOOD TRANSFER CASE WORKS TIRES ARE GOOD (ALITTLE WEATHERCHECKED) RUNS DOWN THE ROAD STRAIGHT IS A VERY CLEAN PIECE AND NOT MUCH LEFT TO MAKE IT PERFECT.  QUESTIONS PLEASE CALL 320-732-4098 NEAL”

View all the pics at eBay

1952_m38_longprairie

 
To Top

1954 CJ-3B Astoria, Or $5000

October 27, 2009 • CATEGORIES: CJ-3B • TAGS: . This site contains affiliate links for which I may be compensated.
0

UPDATE:  I think the price is now $3500 if I read the Ad correctly.

(11/12/08) Here’s a sand/mud rig.  Safe to say it’s been modified.

“Built 350, turbo 350 tranny 205 trans-x, 9″ rear spooled toyota front both with 4.56 gears, boggers rear irock on front. asking $5000.00 may trade for cherokee (my kids like to wheel this is too much rig for them)this thing is built to play with and thats how i used it.”

http://portland.craigslist.org/nco/cto/1439405339.html

 
To Top

Sand Jeep **SOLD**

October 27, 2009 • CATEGORIES: CJ-2A, Racing • TAGS: , . This site contains affiliate links for which I may be compensated.
4

UPDATE: Marco let me know that this great looking Sand Jeep sold.

“Built by Larry Minor who is famous for his 1000+ horsepower sand jeeps. This is his first Jeep that he claims “started it all.” All custom rebuild full cage 3 seater, 4 pt harness, 383 chevy, Turbo 400 auto trans, 9 IN ford rear end with spool, Dana 20 transfer case and Dana 30 front axle built by Pat’s Gearbox, custom rear 16 gal fuel tank alu, 4 wheel disc brakes, Power Steering, Tilt Wheel, B/M shifter, tilton starter, optima battery, MSD 7AL-E ignition, MSD Pro Billet Distributor, Deamon carb, cross flow rad, 2″ equal length custom headers, 6 in longer frame boxed. ”

1946_cj2a_sandjeep_irvine

 
To Top

2 1948 CJ-2As Grand Lake, OK **SOLD**

October 27, 2009 • CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $1000.

“(2)1948 JEEPS 100% COMPLETE ,(1) HAS GOT A LITTLE MORE RUST THAN THE OTHER,ASKING $1000.00 @.BOTH HAVE ALUMINUM TOPS W/DOORS”

1948_2_cj2a_grandlake

 
To Top

1951 M-38 Alpena, AR **SOLD**

October 27, 2009 • CATEGORIES: M-38 This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $1500.

Well, the price is right, but some of the customizations are, well, ouch!  Just look at the driver’s side mod and the hood mod.

“For sale 1952 willys jeep runs good body needs some work. has 200 ford 6 cyl engine 3 speed standard transmission lock out hubs”

 

1952_m38_alpena

 
To Top

A “New” CJ-3B from ICON

October 27, 2009 • CATEGORIES: CJ-3B • TAGS: , . This site contains affiliate links for which I may be compensated.
0

UPDATE: ICON is no longer selling these jeeps. They were priced at $45,000

Jump over to the CJ-3B Page and check out the latest on the new ICON CJ-3B, the first of several (or many?) new CJ-3Bs that will roll of the ICON plant from Van Nuys, CA.  Derek covers this vehicle very thoroughly.  It appears they’ve built a good rig.  The engine is an interesting choice, likely providing debate for some time.   Make sure to check out the gauge panel; it’s very different!

You can also see many pictures of an early prototype here from the CJ-3B Page.

DogProtoCompleteFront400

 
To Top

1951 M-38 Toledo, Or $26,000

October 26, 2009 • CATEGORIES: M-38 • TAGS: , . This site contains affiliate links for which I may be compensated.
0

This looks pretty nice.

“1951 M38 DEL. 12-1-51. GROUND UP RESTORATION 2006 805 MILES. EQUIP. GUN SCABBORD WINTER TOP, SNORKEL KIT, AXE AND SHOVEL ALL NOS PARTS USED AT RESTORATION WITH NEW RUBBER COMPONENTS. Jeep came from Korean Conflict and has 5 bullet holes under driver seat. Please contact Don Hall at Willy’s Restoration (541-336-5869 – restorer) in Toledo, OR, or Mark (650-353-0987- Owner). Jeep is located in Toledo, OR.”

http://corvallis.craigslist.org/cto/1439188183.html

1952_m38_toledo

 
To Top

1951 CJ-3A Newton, NC **SOLD**

October 26, 2009 • CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $3750

“1951 Willys Overland Jeep. Flat fender, one piece windshield, 4 cylinder flat head engine (rebuilt), tranny and tcase rebuilt, new wiring harness (CJ5 style with fuse block). 3 speed on floor. Faded out red paint. Floor boards are in good shape. Vinyl seats in front, no seat in rear. No spare tire carrier. No rust holes. Newly painted metal hard top. Doors and opening fillers need to be painted and windows installed. Runs great. Titled in NC. Best you’ll find for the price!!! Cash only. Buyer will be responsible for pickup.”

 

1951_cj3a_newton

 
To Top

1948 CJ-2A Pine Knot, Ky eBay

October 26, 2009 • CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.
2

Lots of pics at ebay.  It appears pretty solid.

“1948 jeep willys. It has a flat head 4 cylinder motor, with a 3-speed manual transmission. It has a power take off in the back of the jeep. The tries on the jeep are 7.00-16lw, they still said military on the tries. The speedometer reads 64525.The winch on the front is a 10,000lbs. This jeep still runs and drives great. we drive it everyday for a hunting jeep. For more questions about it just email me.”

View all the pics on eBay

1948_cj2a_pineknot

 
To Top

1956 CJ-5 Inglis, Fl $1000

October 26, 2009 • CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.
0

It runs and has a lunar seat in back.

“This is a good hunting jeep. I got the jeep in a trade and know little about it. Has 4cyl. flathead. 4×4 works smokes a little and needs brake work. Coated inside and out. Will try to get other info if needed, just ask or call. Thanks!”

http://www.free-jeep-classifieds.com/classifieds/XcCPViewItem.asp?id=2470

1956_cj5_inglis

 
To Top

1948 CJ-2A Woodstown, Nj **SOLD?**

October 26, 2009 • CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.
2

UPDATE:  It appears this was sold.  It was listed at $600.

It runs, needs clutch, for only $600. Xtra parts thrown in …

“1948 Willys Jeep has NJ title ,motor runs fine can hear run, needs clutch,I have new clutch pressure plate and throwout bearing kit, I also have new gas tank,Jeep needs body work (rust) have 2 extra rears and 2 extra trans with transfer cases one has extension for V8 mod, have original wheels and windshield frame not shown in picture , too many projects going on please ask any questions I’ll try to answer, no seats”

1948_cj2a_woodstown

 
To Top

1949 Jeepster Terrell, Tx $2500

October 26, 2009 • CATEGORIES: Jeepster This site contains affiliate links for which I may be compensated.
2

This appears to run and I can’t see any rust, though the pictures aren’t the best.  This might be a decent deal.

“1949 Willys Jeepster. 327 chevy engine. I dont know for sure how many miles the engine has on it. Factory 4wd. Brakes need work. MAKE OFFER! Any questions call 214-212-8417”

http://houston.craigslist.org/cto/1438803666.html

1949_jeepster_terrell

 
To Top

1946 CJ-2A Wellstone, OK **SOLD**

October 26, 2009 • CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $3000

“ONE GOOD OLE’ 1946 WILLYS JEEP W/ WINCH & TOW HITCH.”

1946_cj2a_wellstone

 
To Top

1951 M-38 Austin, TX **SOLD**

October 26, 2009 • CATEGORIES: M-38 • TAGS: . This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $8000

There’s been a variety of upgrades on this jeep.

“…  When we first got this jeep, it was in pretty rough shape and close to 100 holes were filled in on the body from various things being mounted/removed over the years (blackout lights, etc etc) Virtually all of the work to it was done by either myself, my stepbrother, or a pro shop. I cant remember exactly how many miles are on it “after build”, but I’m guessing the motor/rebuilt tranny has about 5k, the brake system (entirely replaced at time of conversion) about 2k, tires about 2k. again, this is a toy that was hardly ever used.

Here’s the parts list: Chevy 305 HO from a mid 80’s Camaro Z28 installed by Joe White’s Performance Automotive (THE place to go back in the day) motor had to be canted and fenders pushed out to make fit. remote oil and fuel filters, extra griffin aluminum racing radiator we never installed comes with it. the motor had less than 500 miles on it when we got it, Corvette clutch and pressure plate in 3 speed manual transmission, factory twin stick transfer case, custom rear drive shaft with CV joint built by Austin Drive Train, factory dana 25 front axle with Warn premium hubs, factory dana 30 rear axle with Detroit Locker, 5.13 gears front/rear, 11″ drum brake conversion all the way around (now it stops right!) with new master cylinder at time of install …..”

1951_m38_austin

 
To Top

1947 CJ-2A Bonney Lake, WA **SOLD**

October 26, 2009 • CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $900

This looks like a good price considering the completeness.

“I WANT THIS JEEP OUT OF MY SHOP. NEEDS ALOT OF WORK. NOT RUNNING 231 V6. YES IT HAS RUST. FIRST ONE TO MY DOOR WITH $600.00 TAKES IT HOME”

1947_cj2a_bonneylake2

 
To Top

My Build: Cage is ready for Sanding and Paint

October 25, 2009 • CATEGORIES: Biscuit This site contains affiliate links for which I may be compensated.
4

The day has gotten away from me, so this will be the only post tonight….

Today I completed the welding of the cage.  The below pictures show the cage prior to some grinding (and a little more welding and a little more grinding).

As I mentioned yesterday, I hadn’t decided on a paint color.  So, I visited the maker of the paints (Van Sickle Paints – Tractor Paints) I have used on the frame (one thing I really like about the paints is that they have a nice thick brush on color as well as a matching spray color).  It turns out, they have an ‘aluminum color‘.  So, I’m gonna give the aluminum color a try (I don’t really have high hopes to be honest).  The worst case scenario is I hate it; so then I’ll just paint it black.

Here’s a few pics from today:

rollcage_complete

rollcage_complete2

rollcage_complete8

Below is a close up of the back connectors. And in the pic below that, you can see the posts to which the back of the cage connects.  There are two bolts per side.  The bottom of the rollbars actually rest atop the post.  The reason I built this like this was because of a problem I ran into with my last jeep:  It was difficult to run the gas tank hose by the rear passenger-side cage connector.  To bypass that problem this time, I’m trying this post approach.

rollcage_complete4

rollcage_back_connect

Here’s a picture of the raw frame with the posts in the foreground, along with the middle loop platforms and front loop platforms.  The round posts support the seats (the seat platform actually screws onto the top of those round posts).  The round posts were invaluable in acting as a precise guide when placing the body onto the frame, keeping everything well aligned.

You can see more of the frame here http://www.ewillys.com/?p=417

Here’s a look at the front roll cage platforms and a drawing of how the connection occurs.

rollcage_connection_to_frame

rollcage_drawing_connection

 
To Top

My Build: More Roll Cage Progress

October 24, 2009 • CATEGORIES: Biscuit This site contains affiliate links for which I may be compensated.
2

I managed to get as far as I hoped to get today.  I got all the pieces fitted with welds mostly completed.  I expect to have it ready for paint by tomorrow.  I was going to paint the cage black, because I was planning on wrapping it with padding, but I’m liking the silver metal color, so I am considering some kind of metalic color.

rollcage_10_24_09

rollcage_10_24_09_3

rollcage_10_24_09_2

 
To Top

Sand Drag Jeep Southern Washington $3900

October 24, 2009 • CATEGORIES: Racing • TAGS: , . This site contains affiliate links for which I may be compensated.
0

That’s one of the lowest prices I have seen for a nice Drag Jeep.  It sounds like the seller must sell this.

“468ci big block 550 hp.  tci 400 tranny.  scary fast. see full ad under “cars and trucks”.  Trades considered: yz450 yz250 yz 4×4 quad raptor yfz honda. But priority goes to some one with cash. Its priced to sell this week.”

http://portland.craigslist.org/wsc/cto/1434666232.html

Sand_Drag_Jeep_washington

 
To Top

Snow Plow Blade Denver, Co $350

October 24, 2009 • CATEGORIES: Parts This site contains affiliate links for which I may be compensated.
0

I’m sure someone can use this.

“6′ Snowplow blade and attachments. Manual lift. No winch. Had been previously mounted on our Willys Jeep.”

http://denver.craigslist.org/for/1436206039.html

snowplow_blade_denver

 
To Top

1983 CJ-7 Cheney, Wa $2400

October 24, 2009 • CATEGORIES: CJ-7 This site contains affiliate links for which I may be compensated.
0

It’s got an unusual paint job and a pretty good price.

“4-cyl,4-speed camo paint,hard top,gun racks tow bar, runs good ,used for hunting,good rubber 2.400 or trade for willys.banshee,jeepster commando,jeep parts jeep project,willys parts or willys project,sport quad, 4 wheeler ,trailer ,gun safe or always guns Steve 509-979-2701.”

http://spokane.craigslist.org/cto/1435842720.html

1983_cj7_cheney

 
To Top

Year? Model? Ludlow, Ma **SOLD**

October 24, 2009 • CATEGORIES: CJ-2A, CJ-3A This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $800

It runs and drives.

“Vintage willys flat fender jeep. Runs good. No Title. Great for a little plow truck or just a beater out in the woods.”

year_model_ludlow

 
To Top

1946 CJ-2A Yakima, WA **SOLD**

October 24, 2009 • CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $4800.

This has some good drive train updates.

“1946 Jeep willy cj2a. Ford 289 with a 4 speed transmission, dana 44 rear, and dana 30 front axles. Custom headers with dual side exhaust. 31×10.5 tires with approx. 85% tread. Full cage, nice bucket front seats and a back bench seat w/ rino lined floor.. comes with a full soft top w/doors and a bikini top. Runs great. For sale or trade for a Jeep wrangler perferably trail ready.”

1946_cj2a_yakima8

 
To Top

1947 CJ-2A Lake View, IA **SOLD**

October 24, 2009 • CATEGORIES: CJ-2A, Parts • TAGS: . This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $1250

The seller also has some parts for sale too. The engine is stuck.

“Great jeep, has full aluminum top,with full doors,Sound mechanically except engine is still stuck. Cylinders look good,I suspect there may be a bad rod bearing.Think engine may be rebuild-able. Has 15 inch tires,12 volt system including generator,regulator turn signals. Vehicle is complete except seat cushions,windshield adjustment brackets,one hood hold down and one headlight trim ring.will need brake work. I bought this recently but my health will prevent me from getting it running.So I am selling or trading so I can buy a running cj or wrangler. Will entertain offers”

1947_cj2a_lakeview2