UPDATE: **SOLD** Was $1200.

Could have some value. Seller provides some great details.

“I have a 1951 jeep cj3a with a 283 small block Chevy on cj5 axles and cj5 t15 3 speed
The jeep is not running currently as I was working on converting it to a 3 speed manual and adding power brakes and power steering using a yj brake booster and cj5 power steering box
The 283 is a strong runner with power pack heads and vette cam with an edelbrock 4 barrel carb and torquer ii intake. It has an hei distributor and ram horn exhaust with knock off flow masters that exit under the doors.

I have a brand new wiring harness setup for a small block that needs installed
The body has a lot of non factory panels and needs some work on the cowling
It has a nice soft top and doors and both front fenders one is just off in picture. It has a cj 5 open knuckle Dana 30 front and cj5 Dana 44 rear both have lockers.
Washington clean title and reproduced vin plate on front fender
It has a cj5 t15 three speed mated to a Dana 20
I have 4 drive lines and 2 I think will bolt up. It is spring over and should clear 35s
It has a brand new column that I got for the power steering conversion
I have the factory 283 heads as well as the intake and 2 barrel that came with the motor. I have a front bumper with a stinger that can be welded to the frame
The clutch master and slave are brand new and are a hydraulic conversion it has a clutch pedal installed already from a cj5

To be finished a person would need to:
-weld another heim on the steering shaft
-put on high steer on the axle I have some flat tops I could probably throw in
-run brake lines and its setup for hydraulic clutch also needs a line made
– the wiring needs put in
– the frame should be reinforced around steering box
– it will need different tires
– needs new led tail lights installed in rear of tub
– drive lines bolted up
– trans soft mount from skid plate to trans
Text would probably be best and the only trades I would be interested in is a nice set of 31 inch tires on Chevy 8 lug wheels (like brand new) on aftermarket wheels (preferable black)
I’m currently working in eastern Oregon so texting would be best since I often don’t have cell service or you can leave me a message but it might be a couple days”