This truck will be auctioned on Saturday, May 7th.
“1947 Willys Jeep Truck 4WD 11K orig miles. Truck will be offered at Cox and Graves Auction on May 7 10:00 in Stafford. Check Cox and Graves Auction Co. on Auction Zip for details.”
This truck will be auctioned on Saturday, May 7th.
“1947 Willys Jeep Truck 4WD 11K orig miles. Truck will be offered at Cox and Graves Auction on May 7 10:00 in Stafford. Check Cox and Graves Auction Co. on Auction Zip for details.”
UPDATE: **Status Unknown** Was $10,000.
Lots of mods.
“1946 Willys Truck
S10 frame, new power disc brakes, 350-350 transmission, new wiring, new Lokar shifter, new radiator, new gauges, new exhaust, new window glass. Lots more!”
UPDATE: Was $12,500. Status Unknown.
Nice looking truck.
“1950 Willy’s pickup, custom hand fabricated bed, satin black finish with old school pin striping. S10 chassis w/350 Chevy engine and 350 turbo trans. Brand new a/c condenser, compressor, and inside unit installed. I have the new hoses and dryer the need to be installed to complete the system.”
It runs, but is not treat ready yet.
http://youngstown.craigslist.org/cto/5558297529.html
“Up for sale is my 1952 Willys Truck Rat Rod/ Hot Rod. I have a clean title in hand ready to transfer.
About the truck: The truck itself is titled as a 1952 Willys truck. The frame is from a 1987 Toyota mini truck, and retains all breaks and rear axle of a toyota truck. The frame is painted, as it was from a show truck. The frame has a professionally welded in c-notch and a 4 link suspension in the rear. It has a 4 bagged air ride suspension with fast bags. As you can see in the pictures, the truck lays body on the ground. It has front/back and side to side capabilities as well as individual bag control. You can see the switch box in the interior picture. The air bag suspension works wonderfully, and is very fast. The pipes to each bag from the tank are stainless steel instead of plastic for a very nice, and much better quality, than the typical plastic tubing. You can see the tubing coming off of the tank in the pictures.
Continue reading
Lots of updates.
“For sale 1962 willys rat rod. this is a true ratrod. has a 327 rebuilt with brand new heads. motor runs great. has a weiand high rise and edelbrock carburetor. HEI distributor. Zoomies. Custom clam shell silver bucket seats. mickey Thompson valve covers. turbo 350 trans. 32 inch lokar shifter. dana 50 rear end. Aluminum radiator with electric fan. 1953 ford spoke wheels on bias ply tires. rear end has been notched. So Cal speed shop model A front end drop axle. Disk brakes in the front and drum brakes in the rear. Frame and bed has been shortened. New spun aluminum gas tank. new fuel and brake lines. only thing original from the truck is the body and partial frame. Titled and registered. Pink in hand. $7000 OBO contact me for more info. ”
UPDATE: **SOLD** Was $6500.
(12/28/2016) Might need some engine work.
“Up for sale is a 1955 Willy’s pickup truck.
I acquired the rig in southern Idaho 2 years ago and have been working on it on and off since. This rig was previously in Colorado so it has been in dry climates most of its life. I bought it a a restoration and to use as a around town work truck but ended up getting something newer so its up for grabs.
It is tabbed and platted in Washington.
I have done a lot on this truck, last time I started it a few months ago it ran drove and stopped.
The body is really solid, its got a few dents and dings but is actually in amazing condition for its age. The bed is a 6’8” x8′ dumping flatbed. Dump hydrolics run off of PTO, engine is early to mid 60’s gmc 283 small block v8. T18 transfer t90 tranny. It comes with a 8k lb Ramsey work winch that is currently mounted in the bed. Paint is good in some area and fading in others it might be the original paint job. All lights and signals work. This rig has a 3\4 ton payload
Continue reading
UPDATE: **SOLD** Was $4000.
Seller is handling sale for deceased friend’s wife.
“51 WILLYS PICKUP TRUCK WITH A STUDEBAKER V8 IT WAS LAST DRIVEN 1986 AN HAS SAT IN GARAGE FOR MANY YEARS , HOOKED UP GAS CAN TO PUMP ADDED BATTERY IT STARTED UP AND RUNS, BRAKES INOP, CLUCTH OUT OR STUCK? HAS ELECTRIC WINCH ON FRONT,HAS RUST BUT DEFINATELY A SURVIVOR WORTH FIXING FOR THE RIGHT PERSON 4000.OO BEST OFFER selling for my deceased friends wife, it was his dads call me an I will tell you as much as I know, it is located in mineral WA not too far from Eatonville. Please come look at it before making offer ”
UPDATE: **SOLD** Was $5500.
Looks like the bed has been replaced with diamond plate.
“1956 Willys Pickup. 350 Motor. Fun truck and perfect project to get finished up and driving. I bought the truck with the intent for a project and a recent job change keeps more of my time than I’d imagined it would. The truck will start but it needs the transmission and brakes need to be hooked up in order to be driven. $5,500 O.B.O. You don’t see a lot of these trucks now a days and this would be the perfect project. Clean title in my name. ”
UPDATE: **SOLD** Was $2500.
Could be a good price.
“I have 2 willy’s pickups for sale. The 1952 has engine and transmission, starter just rebuilt and new battery. The 1949 has just the body and parts of an engine. These are in good condition. Buyer must buy both. There also is a cab of another willy’s pickup and other parts. All goes for $2500 firm.”
UPDATE: **SOLD** Was $2500.
“1951 Willy’s Pickup 4wd Project Vehicle. It was used to drill holes for blasting. It is 4WD. It has a PTO that could be used for some other purpose like running a winch. It needs a distributor cap, plug wires, a coil and a battery. It has a straight 4 engine. The tires are not in good shape but would probably hold air long enough to get it on a trailer.
I am not willing to part it out or let you work on it for a few days to see if you can get it running.”
There’s $100 of value here.
“60s Willys Jeep have some good parts some trim pieces dashboard pieces and a very good roof. Pretty decent doors
Make any offer need gone asap going to the scrap yard next Friday
Also have a 32′ flat head Ford”
UPDATE: **SOLD** Was $2700.
Dan spotted this possible gem.
“Running, current registration, 250 cu in Chevrolet 6 motor. Original 3 speed trans and drive train. Locking hubs. 6:50 X 16 MS front tires in good condition, rear MS tires are new (not shown in photos). Need to be restored, far from perfect condition. The motor is old, but runs smooth and quiet. This is a cash sale and I have a clean title. This is a fair price and a firm one. ”
UPDATE: **SOLD** Was $5000.
Needs some work.
“4-wheel drive
37,5000 original miles
3-speed manual transmission
Factory-installed power winch
6 cylinder “Super Hurricane” engine
Runs and drives good
Seats are rough
NOT a military vehicle
Spare parts included
Clutch needs work
$5000.00 OBO (cash only)”
Runs and drives.
“54′ jeep truck. 22k original miles 4 cylinder. Manuel trans.4×4. Looking to trade for an M151 a1-2 mutt jeep or sell for 8k firm. It was an idaho state ground vehicle. runs great. Ready to go. ”
UPDATE: **SOLD** Was $6500.
“48 Willy’s flat bed truck it has a 68 Chev 350 with a 4spd no power steering no power brakes but a fun little ride everything works Horn’s yes 2 of them heater wipers radio only thing needed is speedometer cable.”
UPDATE: **SOLD** Was $2700.
Craig spotted this old truck with some great lettering on it.
“Restorable Classic. Is not presently running but turns over. No title.”
UPDATE: **SOLD** Was $6500.
Runs and drives, but needs work.
“Selling my 1950 Willys Jeep Truck in 3 condition out of 6 based on Old Car Prices Guide. It was painted last year but not by a professional. The gas, temp. Batt. Gauges work. It had a new metal gas tank and new fuel pump. It runs and drives and stops. Not bad for a 50s jeep. Tires are average. 2 wheel drive only about 7000 were made
It comes with a complete 4 wheel drive front end and extra rear end.”
Mark listed this over at Sellajeep.
“6 cylinder, 4×4, mechanically 100% restored. Cosmetically it needs glass and seat upholstery.”
http://www.jeeptruck.com/mjs/sale16/adm222/adm222.html
Seller would like to sell this soon.
“For Sale 1950 1/2 Willys Pickup truck frame in pretty good condition isn’t perfect but I need to get it out of here in the next few weeks and I’d rather not scrap it. Rear bumper thing is a little bent and it has been patched professionally behind the cab which is smooth transition between new metal and old, so once it’s painted you’ll never be able to tell, also other plates where fabricated. Deserves to live another day. It’s all ready for drive train since everything’s pulled.
Comes with front and rear axles. Which I believe are 6.17s but no guarantees on that. Rear axle is clam shell style and bolt have seen better days so keep that in mind.
12 leaf Springs in the rear and 9 up front. The front springs are ready to go and need no altering. The rear Springs on the passenger side the bottom like 4 are shot. So I’d just pull those and have a spring shop make 1 bottom leaf to replace those 4, make it ride better.
Brakes will need to be done I’m sure. If someone would rather I can sell without the axles.
I also have a 4.3l V6 TBI chevy engine, th400 Auto transmission, and np208 (passenger drop will work in this set up nicely ) which is also for sale and I could include this or just certain parts.”
Glenn spotted this truck with a modern chassis.
“1955 Willys Jeep off frame restoration. All GMC running gear, power steering, power brakes, fuel injected 4.3 v6 engine. Runs excellent.”
UPDATE: **SOLD** Was $9550.
Unique truck.
“Custom 1948 jeep truck for sale or trade.
Many new parts, I have all receipts. Text for details.
Strong Engine and Transmission, good tires. Fun truck.”
Craig spotted this one. Might have some value, especially if it has dually adapters.
“Here’s something you won’t see everyday – a 1951 Willys pickup that has (we think) a 1948 Chevy dually diff with a pto powered dump bed powered by a ’50s Ford Flathead V8 engine. What a Frankenstein. We actually spent a lot of time rebuilding the carb and distributor and getting it all set up. Ran like a champ for about a minute until a valve stuck. Heads are currently off, but machined and ready to reinstall. To make it easier we got another ’50’s Ford Flathead that turns freely and ought to run that goes with it as a spare.
It’s as unusual as they get. Body is fair. This could be a great yard truck with very little work.”
http://albany.craigslist.org/cto/5534246160.html
UPDATE: **SOLD** Was $23,500.
(10/04/2015) Real nice truck.
“48willys pickup .not original. 2 wheel drive. Turbo350auto. 383 stroker engine.373 ten bolt rear. Cloth int. 66,000 miles on truck..4 k on drivetrain”
UPDATE: **Status Unknown** Was $6000
Might make a good restoration or as is truck.
“1948 willys pickup with power train winch everything original except gass tank runs and drives”
The cab has some great old art.
“Rat rod 1951 willys project. 1987 dodge d50 chassis body is aitting on frame, not bolted down. This is a project no i will not part it out. $1,500 firm.”