Body Parts Research Archives

To Top

Fiberglass Flatfender Body Lacey, Wa $100

• CATEGORIES: Body Parts • TAGS: This site contains affiliate links for which I may be compensated.

It’s a good price, but looks like it needs some work.  I *think* this is a narrow body rather than a standard sized body.

“jeep body glass 2 halfs no floors. Rough needs glass work. $100 360-556-5181”

http://seattle.craigslist.org/oly/pts/1520453218.html

fiberglass_flatfender_lacey

 
To Top

Aluminum CJ-3A body + parts S. Cal $8500

• CATEGORIES: Body Parts • TAGS: This site contains affiliate links for which I may be compensated.

It’s cool, but it’s a CJ-3A not CJ-3B.

“CJ3B Aluminum one of a kind.  Pictures speak for themselves. POLISHED aluminum…  Detailed replica of CJ3B flat fender…  Aftermarket AFW frame.  I acquired this Jeep CJ3B through a long history and I just do not have the time to complete the project. My loss your gain… The original fabrication cost of the body and frame is over $12,000.  Motor mounts are for a Chevy 350, or Vortec V6, Buick v6 etc… 44 difs no gears.  The wheels and rims pictured may not come with the vehicle… very scratched rims etc… not worthy of this show piece.  Price is $8,500 negotiable, motivated to sell in 2009.”

http://inlandempire.craigslist.org/cto/1510996069.html

aluminum_cj3a_southerncal

 
To Top

1952 CJ-3A Parts? Selah, WA **SOLD**

• CATEGORIES: Body Parts, CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was No Price.

It sounds like the seller is parting out parts of this jeep?

“52 willys bodytub & hardtop $800.  Also selling flywheel, clutchdisk, presureplate, 4spdtranny & 18transfercase $400.  All together & working , will pull.”

1952_cj3a_selah

 
To Top

CJ-3A Bodies Alameda, CA **SOLD**

• CATEGORIES: Body Parts, CJ-2A, CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $800

Note the bottom blue tub.  It has the custom dash that I’ve seen on 5 or 6 or jeeps from California.  Also, it appears that it doesn’t have a driver’s side gas inlet as a part of the original design.  Anyone know anything about these bodies?

“I have 2 1940’s willy’s tubs the one in the photo the grey one on top has fenders hood tub and windshield frame – needs grill and tailgate and the blue one on the bottum is just a tub I am willing to sell them together or apart please call.”

 

2flatfender_bodies_alameda

 
To Top

Fiberglass Flattie Body Corona, CA **SOLD**

• CATEGORIES: Body Parts This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $900.

“CJ-5 Jeep Fiber Glass Body Kit. I was going to use this body for a drag jeep that i was building. Never been mounted. Fiberglass white. paid $1200. or trade for New radial white walls 3″ 225/70-15.”

fiberglass_racing_corona

 
To Top

New Corner Diamond Plating on eBay $58 plus shipping

• CATEGORIES: Body Parts This site contains affiliate links for which I may be compensated.

I ran across this ad for brand new corner diamond plating.  The seller is charging $58 for the pair, plus shipping.  My initial search suggests this is a great price.

“Here I have a set (left & right) of brand new Jeep cj5Aluminum diamond plate corner guards. They will fit cj5 & willies Jeeps. I have also have some of my customers use them on there 1940s and up CJ2A jeeps..  The corner guards measure 16″ x 24″ . The thickness on these corners are strong 14 gauge and are made in the USA .. These are great for Dressing up your Jeep and protecting it at the same time. They are also great for covering body damage or rust. The corners are pre-bent so they will go on nice & easy with the supplied self-tapping stainless steel screws to fasten the corner guards to your Jeep ….”

View more information on eBay

diamond_plating_corners_ebay

 
To Top

M-38 Grille Seattle, Wa $75

• CATEGORIES: Body Parts This site contains affiliate links for which I may be compensated.

Steve’s got this good looking grille for sale, though I believe it’s a M-38 grille. Note the holes at the bottom.  I believe they are for attaching the M-38 grille hinges.

“All Orignal early Flat fender Grille with Shroud ( I think CJ2A), Uncut or molested, Light surface rust but in great shape, been in storage 30+ yrs, call with questions, 206 890 6233.”

http://seattle.craigslist.org/see/pts/1462257584.html

cj2a_grille_steve

 
To Top

Fiberglass One Piece Flattie Body Norco, CA **SOLD**

• CATEGORIES: Body Parts, Racing • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $1800

I thought I had listed one of these already, but I can’t seem to locate it.

“Custom 100% hand laid fiberglass Willys replica. Perfect for light weight drag racing, ideal for rock crawling. Call for more details.”

 

fiberglass_onepiece_body_norco

 
To Top

Flat fender body/frame/cage Willmar, MN **SOLD**

• CATEGORIES: Body Parts, CJ-2A, CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $250.

“Jeep Willys Frame & Body For Sale”flatfender_body_willmar

 
To Top

CJ-3B Parts Grass Lake, Mi

• CATEGORIES: Body Parts, CJ-3B This site contains affiliate links for which I may be compensated.

These look good for the price.  You might be them for less.  I’m not sure if these are still available or not as the ad was posted Aug 27.

“We bought a house and in the attic was a Willys jeep in parts. We have no idea what year. If interested let me know and we can figure out what else is there. MAKE AN OFFER!!! Hood 30.00 OBO, Tailgate sale pending 50.00, 2 Rims 5.00 each 2 lights 5.00 each speedometer 10.00, Grill 45.00 OBO”

http://annarbor.craigslist.org/pts/1346151021.html

cj3b_hood_grille_grasslake

 
To Top

2 CJ-2A bodies Okmulgee, OK **SOLD**

• CATEGORIES: Body Parts, CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $200.

2 bodies and parts for only $200?  It’s worth a closer look.

“I have a 1947 and 1948 Willys Jeep Bodies CJ2A, no front grill, otherwise complete. I am asking $200 for both bodies combined. . I will entertain a trade for something of equal value.”

cj2a_bodies_okmulgee

 
To Top

Front Fender Flares for Flatties

• CATEGORIES: Body Parts • TAGS: This site contains affiliate links for which I may be compensated.

Ok, I’m a big fan of The Find!  I just did a search on “Front Fender Flares for CJ-2A” and found someone who still sells them.  I know there’s been several people looking for these.  Despite my google search attempts, I haven’t had any luck locating them until now.  Click on the Ad below to go directly to the ACME site.

front_fender_flares_thefind

 
To Top

Fiberglass Flattie Tub Elma, Wa $950

• CATEGORIES: Body Parts This site contains affiliate links for which I may be compensated.

fiberglass_tub_elmaI’m not sure if it comes with the roll cage and other parts or not.

“1947 willys tub, great shape, title in hand. 360 500 7895. olee271980@gmail.com. lots of other jeep parts for sale too, call”

http://seattle.craigslist.org/oly/cto/1305429892.html

 
To Top

DJ-3A Body and Fiberglass Front Clip Tucson, Az $550

• CATEGORIES: Body Parts, DJ-3A This site contains affiliate links for which I may be compensated.

dj3a_body_fiberglass_clip_tucsonUPDATE:  Price dropped to $550.

This looks in great shape.  A DJ body in this good of condition isn’t easy to find.

“Willys flatfender style steel body with flip forward fiberglass hood/fenders. Comes as shown in pics without seatbelt harness. Pretty straight, very slight surface rust, no scaling. Not perfect but could be with some tlc, or use as it as is. Perfect for your project. No title/no frame. No other jeep parts. May entertain trades. Looking for a trailer for quads or hauling cars/trash. Price is firm. Thanks fer lookin'”

http://tucson.craigslist.org/pts/1290381554.html

 
To Top

Fiberglass Flatfender Body Clovis, Ca $200

• CATEGORIES: Body Parts This site contains affiliate links for which I may be compensated.

UPDATE:  I received some pics from the seller.  The holes aren’t all that bad (I’ve dealt with worse), but the right rear wheel well has seen some stress.  I’d have to look at that much more closely. I believe the body is the same as my old jeep, which was a light duty body.  The good news, the area over the transmission looks like it’s hardly been touched.  This is usually cut up.

The windshield is certainly unusual.

“1944 Willy’s Fiberglass tub, hood, & fenders. $200 o.b.o. Call Clint @ 559-346-1650.”

http://fresno.craigslist.org/pts/1272390677.html

body1_clovis

body2_clovis

body3_clovis

body4_clovis

body5_clovis

 
To Top

Fiberglass Flatfender Body Roseville, Ca $1000

• CATEGORIES: Body Parts This site contains affiliate links for which I may be compensated.

fiberglass_flatfender_body_rosevilleThis looks like a lighter duty fiberglass body similar to the fiberglass body I used on my first jeep.

“Replacement fiberglass tub for all flat fender Willys Jeep models. Comes with high-back, brand new, fiberglass seats with lap belts. Also has a perfect grill. This tub is in excellent shape, no holes and its never been mounted. The grill and tub are ready for your paint! This will shorten your project by months! Please call Mark @ 916-295-9157 for more information.”

http://sacramento.craigslist.org/pts/1215559995.html

 
To Top

Brian needs a passenger side fender

• CATEGORIES: Body Parts, wanted This site contains affiliate links for which I may be compensated.

Brian, who is in Michigan, needs a passenger side fender.  It does not have to be perfect because he plans to take the hat channel off it and remove the bulge for the battery. He needs the top and bull nose and the area that mounts to the side step to be in good shape.

If you have something, let me know and I’ll hook you up with him.

– Dave

 
To Top

MB Grilles Sequim, Wa Varies

• CATEGORIES: Body Parts, MB This site contains affiliate links for which I may be compensated.

mb_grilles_sequimThis seller thinks he’s got CJ-2A grilles, but they are really MB grilles.  I count 3 grilles, plus a fender and a tailgate.  Check out the ad for specific prices.  These are located way up on the tip of the Olympic Peninsula.

“I have several years worth of Hot Rod, Rat Rod, Mopar, Muscle Car and Jeep parts. Please don’t ask if I have something else if it is not pictured here. This is what I am willing to part with right now. All prices are OBO, but please do not insult me. …”

http://seattle.craigslist.org/kit/pts/1101600699.html

 
To Top

Fiberglass Racing Body Selah, WA **SOLD**

• CATEGORIES: Body Parts, Racing • TAGS: This site contains affiliate links for which I may be compensated.

flatfender_racebody_selahUPDATE: **SOLD** Was $250

“flat fender race jeep body with fenders,& grill lengthened by 8+” narrowed by 12″ $250 firm call”

 
To Top

Fiberglass Flat Fender Bobcat Hood Puyallup, Wa **SOLD**

• CATEGORIES: Body Parts, Racing • TAGS: , , This site contains affiliate links for which I may be compensated.

bobcat_hood_fiberglass_portlandI am pretty sure this sold

It looks in excellent shape.  I didn’t see any of these classic hoods at the swap meet (or they had already sold).  Having Don’s old card in the glass is a cool benefit.

“Vintage Aftermarket Jeep Hood for CJ2A CJ3A M38 MB & GPW. This “Bobcat hood” is a real find. The fiberglass has no cracks and the hinge works good. You can tell its vintage because there is a business card in the glass for (Don Prine’s) Prine’s Jeep Service and the phone # is JU 4-6648. So I would guess 60’s or before. The hump can give your air filter more room if you have a V-6 or V-8 under your hood. And it looks good..

 
To Top

Question: Front Fender Flares for a Flattie?

• CATEGORIES: Body Parts • TAGS: This site contains affiliate links for which I may be compensated.

fenderflaresA reader asked if anyone knew where someone could purchase a set of fender flares for the front fenders of a flattie? Let me know if you have a lead and I’ll pass it on.

Thanks … Dave

 
To Top

DJ-3A? Flat Fender Body & Running Gear Tri Cities, Wa $500

• CATEGORIES: Body Parts, DJ-3A This site contains affiliate links for which I may be compensated.

flatfender_tricitiesNote the large round speedometer.  This is likely a DJ-3A body with a tailgate. This is rare enough to be worth a closer look.

“Includes running gear. $500 OBO Call 509-865-2886”

http://kpr.craigslist.org/cto/1014306990.html

 
To Top

Wanted: CJ-3A Tub in Bend Or

• CATEGORIES: Body Parts, CJ-3A This site contains affiliate links for which I may be compensated.

We’ve a got a jeeper looking for a tub.  Anyone have one near Bend?

“I’m looking for a CJ3A tub. Years 49-53 if possible. Would be willing to pay cash if it’s a good deal.”

http://bend.craigslist.org/wan/984525105.html

 
To Top

MD JUAN — Jeep Restorations in the Phillipines

• CATEGORIES: Body Parts, stainless/jewels This site contains affiliate links for which I may be compensated.

mdjuan_logoA reader sent me to a Craigslist-like website for the sale of all kinds of items in the Phillipines (I’ll save that discussion for a post tomorrow).  Along the journey, I came across the website for MD JUAN, a Phillipine based company that some of you are probably aware of that does jeep restorations and supplies parts to resellers all over the world, including North America.

So, it’s clear that at least some jeep body parts are being exported from the Phillipines into the United States through 5 different US Resellers.  Moreover, the company has been in business in some fashion since 1967, so it’s been doing it a while.  So, perhaps there is some way to work with those importers to bring in stainless body parts (for those interested in non-Jewels stainless)?

Also interesting, MD JUAN sells 1945 MBs.  No price is listed, however they do include an email address.

md_juan_frontpage

 
To Top

Flat fender fiberglass tub/body Reading, PA **SOLD**

• CATEGORIES: Body Parts, CJ-2A, CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

fiberglass_tub_readingUPDATE: **SOLD** Was $1500.

“Willy’s Flat Fender Fiberglass Jeep body/tub.  Fits 1946-1965 CJ2A, CJ3A, & CJ3B Jeeps with 80” wheel base. BRAND NEW – very durable FIBERGLASS.  Use on the road and/or off the road. ** Asking $1500.00 “