UPDATE: **SOLD** Was $3600.

(07/19/2011) Francis has his jeep for sale.  The tub is a bit of a puzzle, as it appears to be either a M-38 tub that has seen some good body work or  a replacement tub of some type.

“1946 Willys Jeep CJ-2A
Ford 4 Cyl
I think it is the original Transmission, Transfer case and Axles.
Has the original gas tank under the drivers seat but it is not hooked up. There has been a gas tank added in the back under the car. Done very well and looks like it was done at the factory. I think it is about 10 gallon but if you connected the original also it could have over 20. The gas gauge has a switch to see the level of both tanks.
New front racing seats with 4 point harness.
Backseat bottom lifts to reveal under seat storage.
Roll cage.
Tires are good.
Runs and drives great.
4 wheel drive 4×4 works no problem, Does great off road.
Locking hubs in front.
Tow bar.
Warn 5000lb winch ( I don’t have the wiring or controls for it)
No major rust.
Tub is in great condition.
Comes with extra set of wider wheels with old 31inch tires mounted.

Cons-
Front axle leaks a little.
Crack in exhaust manifold ( still runs and drives good just a little exhaust leaks out of crack).
Sometimes pops out of second when slowing down in second.
Crack in windshield.( flat glass should be easy to replace)

Price is $3600. I am in no hurry to sell. I might go down a little but no low-balers. Would consider trade for something of equal value 4 wheel drive that can be used and a duel purpose commuter and off road. Would like a nice 4×4 jeep Cherokee, lifted.

Please email offers or trades.
Call if you would like to come see with cash in hand. 818-two93-five4one7
I am not interested in letting everyone test drive my 64 year old jeep so if you would like to test drive please have cash in hand.

Registration expired April of this year.
Pink slip in hand.”

UPDATE: **SOLD** Was $8000.

(02/21/2011) Has lots of mods.

“*Chevy vortec V-6
*35×12.5
*dana twin sticks
*8000lb winch
*digital gauges
*dana 30
*lock right front, detriot rear

To much to list. Great shape.  call for more info or pics. ”

UPDATE: Were $1000. **SOLD**

There sounds like some value here. The snow blower is $500 extra.

“I have a Willys Jeep that runs and drives with title, newer tires. Clutch needs some work but will start up and drive right now. I have an older model CJ Jeep, not sure of the year but when it was parked it ran, needs tranny, no title, decent tires V6, camo paint job. I will sell the Jeeps together for $1000, or the Willys for $600 and the CJ for $400, both would make great mud Jeeps. I can send pictures of the CJ if needed or we can set up a time to see them. Also newer Cub Cadet Snow Blower with mounts and will bolt to pretty much any garden tractor, $500 OBO.”

No pics provided.

“For sale, 1947 Willy’s Jeep. Original, runs good. $3500 phone 541-723-3371”

http://klamath.craigslist.org/cto/2503973732.html

UPDATE:  Still Available

(07/20/2011) Doesn’t run.

“1948 Jeep. Not running and mechanicals unknown. Body straight with minimal rust. Consider this a project with work needed to meet your standards. Comes with many new uninstalled parts and etc. New top with bows. New seat cushion uph, front bumper, gauges, diamond plate, inner rear fender wells, electronic ign. already 12 volt, parts for disc brake conversion on front, dash decals. Price is firm! $2000.00. Also have 1948 jeep p/u rolling chassis with Buick V6 adapted to Chevy p/u 4 spd with jeep overdrive and power steering for $500. Sold only with little Jeep as a package. 509 669-8821”

http://wenatchee.craigslist.org/cto/2503555318.html

UPDATE:  This supposedly sold  at $2000 around July 10th. But now is back for sale at $2500.

(07/10/2011)

“1951 Willys CJ-3AGreat project vehicle for restorationOriginal PartsTow Bar in frontHitch on back Flat-Head Four”

UPDATE:  Still Available

(06/13/2011) This runs, but is rough.

“1946 Whillys jeep with plow can be used for parts or be restored. Runs flat 4 head motor. Inside is ruff. 989-770-4712”

http://flint.craigslist.org/cto/2502442072.html

No pics provided.

“hi i have a jeep i need to get rid of. email me at
hardtoforget666@gmail.com
I only want $100 for it”

http://seattle.craigslist.org/see/cto/2497734350.html

UPDATE: **SOLD** Was $1695.

This appear solid.

“1946 Willys Jeep w/PTO winch. Fix and use it, or many good parts Seems too good to just part out, has great potential to be complete.

Motor seems sound, 3speed transmission needs some work. Functions, but not correctly. PTO winch works good.”

It could use paint, but otherwise seems solid.

“48 Willy’s Runs good, new head gasket , 327 Chev motor , also with windshield, $3000 obo.. you pick up.. Call and ask for Nick 928 768 9137 or cell 702 577 5993”

http://mohave.craigslist.org/cto/2499793850.html

Comes with wagon wheels? Does this mean it is a wagon? No pics provided.

“Comes with wagon wheels and tires has straight body call 903-812-0342 contact via email for a pic”

http://easttexas.craigslist.org/cto/2500382977.html

So is that thing attached to the hood?

“1946 Willys CJ2A. Runs and drives really good, has a 350 V8, Seats, and Steering column out of a 1969 Camaro. It also has the saginaw steering conversion so it’s nice and stable at highway speeds. It has a chevy 3 speed manual transmission and it is currently 2 wheel drive with a straight axle up front. Unlike most jeeps of the era, this one has a real tall rear gear so it’s more than capable of going 70 miles an hour (it’s only turning 2500 rpms at that speed!). It has new tires, radiator, distributor, battery, gas tank, plug wires, all new brakes (master cylinder, wheel cylinders, shoes, and brake lines). The frame has been fully boxed in so the jeep can handle all the extra power of the V8. The engine has an Edelbrock Performer RPM Air Gap intake manifold and an Edelbrock 600 CFM 4 barrel carb. Since its really light, it gets 18 mpg which isn’t bad for a carburated V8. It comes with a Tiger Top that’s in pretty good shape, with one small slit in the roof that shouldn’t be too hard to repair.

Now for the bad, the outside is really rusty. The wheel wells are the worst, and are pretty rotted. I’ve welded in new metal to patch the floorboards, and I then coated the floors with 3 coats of POR15 and 3 coats of Rhino-Liner to keep them from rusting again. The frame and underside are actually in great shape and pretty much rust free. This would be a great candidate for a rat rod, or you can buy a whole new steel or fiberglass body and make it look great! I’m moving into an apartment for my new job, so all the toys need to go. It comes with an extra hood and grill. I’m asking $1500, no trades. Call 563-650-1965 if interested!”

http://quadcities.craigslist.org/cto/2499010527.html