It runs, but needs work.

https://www.facebook.com/marketplace/item/692706608025434

“47 willys army jeep 4×4 runs great 2 sets of wheel and tires come with and 4k is the price”

Has a rear PTO.

https://www.facebook.com/marketplace/item/341480203848757

“1946 Jeep CJ2A 4CYL 3 SPEED standard on the floor 4 wheel drive runs good yard drives project currently not road worthy.. possible trade not rusty.”

UPDATE: Still Available.

(10/04/2020) Appears worth a look.

https://greenbay.craigslist.org/cto/d/brussels-1947-willys-jeep/7207112883.html

“1947 Willys Jeep with plow. Mostly original (except for tires). Not restored. Good condition. Unknown mileage. Stored indoors year around. Will negotiate. You pick up.”

Not sure there’s much value here. Axles NOT included.

https://inlandempire.craigslist.org/cto/d/banning-1948-willys-cj-2a-crawler/7216843104.html

“Up for sale is my 1948 Willys CJ-2A project, selling the Tub and Frame. *Axles NOT included* The tub is in better shape than most, has some rust and some Bondo. However I didn’t care, as it was going to be a rock crawler. I also have a spare wind shield that is included. The frame is made from 2″x4″x1/4″ steel and excepts YJ Leafs, as shown in the photos, I bought it from a couple guys in Nevada. Other than that make me an offer, i’m not looking to sell separately.”

UPDATE: Price dropped to $1500.

(06/20/2020) It’s rough. Has a front facing PTO.

https://panamacity.craigslist.org/cto/d/youngstown-1948-cj-2a-willys-jeep/7208079379.html

“1948 Willy’s CJ-2A Jeep. Ready to be restored. The engine turns over. It has already been switched over to a twelve volt system. Needs to be rewired, and a new fuel tank. I have the original title. Included is a second frame with spare parts. Also includes a wench, and a pto Transmission”

Might have some parts value.

https://sheboygan.craigslist.org/cto/d/sheboygan-willys-jeep/7220853368.html

“willy’s jeep V6 …I think all parts are there. Not sure of year…No title Bill of Sale….. Best offer”

No description provided. If it runs, it could be a good price.

https://lacrosse.craigslist.org/for/d/houston-willys-jeep-for-sale-by-owner/7221648184.html

UPDATE: **SOLD** Was $5000.

Has an head. Needs the transmission reinstalled.

“I pulled the transmission and transfer out to replace the seals and went down the rabbit hole. All new herrings, shafts, and gears in the T90 but I stalled out and it’s been sitting in the garage for 3 years. The soft top is brand new. I’ve got all new engine and tranny mounts. Previous owner did a lot of work including the 12 volt conversion and swapping to the F4 engine.”

Listed as a 1944, this seems to be a CJ-2A body and chassis. No title.

https://www.facebook.com/marketplace/item/4078087538884388/

“1944 Willys Jeep, this is a project. The engine is missing a few parts. I pulled this Jeep out of a field, the hood and fenders wasn’t on the Jeep. I shot the primer to show it can be a great project. I have another Jeep that has same engine, I can let you have that engine also, if you pull it. Come take a look. Comes with bill of sale”

This may make a good project.

https://denver.craigslist.org/cto/d/wheat-ridge-1947-jeep-willy/7217214098.html

“This is a good vehicle for restoration.
99% of rust is surface only
One repair has been done on the rear panel
Original motor
Unknown if the engine starts
Has been stored in a garage for over 30 years”

UPDATE: Price dropped to $4100.

(09/21/2020) The body has been rebuilt.

https://www.facebook.com/marketplace/item/312795493345745/

“Can you believe FB has no option for a CJ Jeep! This is a 1946 CJ-2a even though it is titled as a 1947 for some reason. Vehicle is in very good shape no dents no rust it has had numerous body panels professionally replaced skimmed and prepped for paint. It has an f-head engine conversion that runs well, new tires, shocks and some suspension components. New seats . Has a new in box 12 volt conversion kit also. No top or doors. Comes with tow bar and a trailer hitch . This is a very good start towards a really nice Willys Jeep! I just decided I wanted something a little bit more Creature Comforts and not as nice to take up into the mountains…this is too nice to get dents in”

This 1952 CJ-3A was priced at $12,000. No description provided.

https://www.facebook.com/marketplace/item/616789585882029/

UPDATE: Price dropped to $8500.

https://fresno.craigslist.org/atq/d/raymond-1948-cj2a-jeep-with-pto-wench/7215436224.html

(03/20/2020) “1948 jeep cj2a with PTO wench and trailer”

UPDATE: Price dropped to $1100.

At least some value is here, but I can’t tell how good the body is.

“I have a 1946 CJ2A project. Mostly complete including a free turning engine. T90 trans, Dana 18 transfer case. Seats in excellent condition. I bought it to restore, but it turns out to be too much for me. This is a major project or great parts vehicle. Very little body rust. Floors and tailgate solid. No title or numbers”

Seller has removed some parts. Dash wiring all removed, so likely doesn’t start.

https://reno.craigslist.org/cto/d/reno-1948-jeep-cj2a-military-jeep/7215797859.html

“Bought this a few months ago it ran and drove. It is an absolute blast to drive, like a cross between a tractor and a gokart… I took it around the neighborhood and to the grocery store a few times down the street, then started to prep to remove the tub to fix some body rust and a few other issues. Steering box was loose and brakes worked but felt weak.

I didn’t get very far, removed some body bolts, undid the dash wiring (all clearly labeled for easy re-assembly)

I got into garage today to start working on it again after a few weeks and realized how many other things I need to get done around the house, etc etc…

I figured I would put it up for sale. If i can get $7500 for I would sell it. I would really rather finish it as it isn’t a huge project, but I need to prioritize things a little more first.

Its extremely easy to work on, parts are plentiful. I have some new parts I bought that will go with it.
Headlights, tail lights, 4wd, etc all worked great. 4low is a blast as it just barely crawls around.
I have the passenger seat, it was just removed to get ready to remove tub.
It has a tow bar so you can flat tow it easily with a standard 2″ ball.”

UPDATE: Price dropped to $4750.

(09/29/2020) This runs, but could use some body work. Seller doesn’t check email every day.

https://cleveland.craigslist.org/cto/d/vermilion-1946-willys-jeep-cj2a/7203724294.html

“I Bought this jeep for a total redo. Previous owner I’m told owned it 20+ years, garage kept and it shows. Divorce forced sale. From the pile of receipts I have he was slowly redoing it. The mechanical work seems to be all done as it runs great, shifts good with good oil pressure. I bought it not running as it was about half way through a 12 volt conversion which I finished and the carb was shot.

Continue reading →

UPDATE: Price dropped to $4200.

(03/19/2020) Has updates.

https://poconos.craigslist.org/cto/d/dingmans-ferry-1946-willys-jeep/7215569734.html

“1946 Willys Jeep CJ, Buick V6 3 Speed. Four-wheel drive. Body and frame in good shape, motor runs well. Call for Info.”

No pics provided. Engine not installed.

https://newhaven.craigslist.org/pts/d/stratford-1948-willys-cj2a/7208786704.html

“48 Willys Jeep CJ2A-$6500 obo!
Lots of new parts-Tires, Soft Top etc.
Lots of extra/spare parts included, parts books etc.
This is a project. Jeep currently has no engine installed. 2 engines included. Jeep is a roller, everything is there and together. No rot, no rust, clean title. It just needs an engine built/installed!
$6500 obo!”

UPDATE: Price dropped to $10,500

(11/21/2018) Has updates.

https://buffalo.craigslist.org/cto/d/alden-1946-willys-cj2a/7213999239.html

“46 Willy’s all redone v6 motor 35” tires”