UPDATE: **SOLD** Was $3000.

(09/23/2013) The tub is new.

“Have a 49 CJ3A for sale has new steel tub, gas tank, gauges, body mounts and hardware, new brakes and bearings and 12 volt wiring harness. Has steel hard top with doors. Currently has overhead valve jeep 4cyl, have original flat head 4cyl that goes with it that needs rebuilt. Jeep has heater and additional hood for the flat head engine. Needs windshield and tires. Engine smokes a little but runs and drives perfect. Bill of sale only. Can text or e-mail more pics
$4,500 o.b.o or make offer”

UPDATE: I might be wrong about the overdrive. On closer look, one of the knobs connects to a rod that disappears under the dash. Brian spotted that.

“Ran years ago, no title. Good for parts or restore. Comes with plow. Here are some numbers
that may help with id. Am selling for family, can only say it sat outside a few years.
Willys W4 8003784, 6-48C, 452GB1 35367
570-249-196two
I have been informed that this is a 1952 CJ-3A, based on the numbers.
Have posted more pics to help prospective buyers.”

http://flint.craigslist.org/cto/4080396909.html

UPDATE: **SOLD** Was $4000

It’s a project.

“1950 Willys CJ-3A Jeep 4×4 with Clean Arkansas Title
This is a project that has had over $6k invested, that i’m not going to be able to complete.
Everything you see is brand new or professionally refurbished $$$.
All parts are Factory 1950 Willys 3A parts or parts purchased from certified Willys vendors.
Comes with a brand new 3A body tub with all new steel. $2k
I purchased this Willys from a guy that had done several Jeep restorations & he had put a new Saginaw power steering set up on this 3A, everything else is as close to factory as it can.
Absolutely no rust on Body or Frame.
We have completed the frame & all the running gear has been rebuilt & replaced! (See Pictures)
4-134L Head Motor
T-90 3 Speed Transmission
Dana 18 Transfer Case
Both Axles Replaced
All Breaks (10 inch Upgrade) All new Lines-Cylinders
12 volt upgrade electrical
Exhaust is new & complete
Engine runs excellent! Comes with New Wiring Kit. Body work needs to be completed. You will have everything to complete this 3A except for the steering wheel, floor pedals, instrument gauges, & tires. I think I have everything else to complete this Great Willys 3A!
I will not part this 3A out, took too long to get the correct parts please don’t ask!
If u have any questions please give me a call or if you need to see something I can send you a picture.”

UPDATE: Still Available

(08/17/2013) This has the front counter weight and a rear PTO.

“We have a running 1949 cj3a with pto and gear box and front counter weight. Has top bow and a variable speed governor. Engine was recently overhaul
Can sell out right but would like to trade for a 48 or 49 stock willys truck.”

http://louisville.craigslist.org/cto/4078575397.html

UPDATE: **SOLD** Was $1500

(10/19/2009) This jeep may be worth a closer look. The hood looks nice and tight against the grille. The steps have been customized.

“This jeep has been in my family for over thirty years. Nobody has time to restore it to driving condition, so it is time to part with it. Last time it was started up the engine ran great, but it has been sitting for a few years getting the body worked on. It is currently stripped down to bare metal and is ready for a new paint job. I have an extra set of tires, everything for a tune up, the soft top, extra gas can and other various parts. I purchased a new tailgate and hood a year or two ago but haven’t put them on yet.”

UPDATE: Still Available

(08/31/2013) This has a nice paint job at some point. Unclear just how much value is here.

“This is a Jeep CJ 3A which his in the restoration rebuild process. We started you finish. This vehicle has not been licensed since ’78 so there will be no record with the state. right now it sits with an in line 6 cyl. I think AMC engine? But not sure. It would require work to be useable but then you have a very unique Jeep. No title one can use it off road vehicle or apply for a bonded title.
Come and take it away.”

http://minneapolis.craigslist.org/hnp/cto/4079186275.html

UPDATE: **SOLD** Was $3500.

This appears solid.

“Jeep willy that has been restored some. Runs good, has been in parades before. Wanting to sell or trade for a small tractor or 4 wheeler or UTV”

This might be worth a look. It appears to have a military plate next to the standard data plate.

“1951 Willys Jeep. I have had this for a few years. it runs and drives good. I have it registered as a classic and I use it as my runaround vehicle in the summer. I just rebuilt the transmission. It has a ford 170 straight six out of a 63 fairlane. It has the borg-warner T-90 3-speed transmission. 4×4 work great. tires are decent. I had big plans to restore this all the way but I dont have the $ for it and my parents want it out of their driveway. I have the original bucket headlights and soft top for it. and i had the seats recovered last year.”

http://www.ksl.com/auto/listing/789131?ad_cid=5

Looks solid.

“Small block Chevy, Automatic Transmission and much more. Excellent condition. Contact Marvin 831-235-5637”

http://monterey.craigslist.org/for/4069853510.html

UPDATE: Was $2000. **SOLD**

Needs fuel pump.

“1953 Willys CJ3A.Good condition .Very little rust.Needs a fuel pump.Engine ran excellent.$2000 or best offer.Cash only.Email and I will answer ASAP. 4 Cylinder Flathead.4wd.”

UPDATE: **SOLD** Was $3500.

(011/17/2011) This appears solid.

“1950 Willy Overland Jeep CJ3A
The body is a little rough. It is a good hunting rig as is. The engine, transmission, transfer case and front end was all rebuilt about 10 years ago. This jeep has a 10 gallon aluminum gas tank in the back of the jeep. A metal plate has been welded into place where the tailgate once was. This unit is pretty rare because it has a stock high /low range gears on a 3 speed transmission, which means you actually have 6 forward and 2 reverse, not including when you put it into 4 wheel. All running gear is stock, engine is a flathead. This thing will climb just about anything. Since rebuild on running gear 10 years ago we have only put a cuople thousand miles on it. Notice the front picture behind the towbar! That is a Ramsey 12,000lb winch in excellent shape, you could hang this jeep in a tree with that winch. I installed a smaller winch cable since the jeep is so much lighter than the pickup it was intended for. The smaller winch cable allowed me to get more footage on the spool.”

UPDATE: **SOLD** Was $1350.

(02/28/2013) This looks like a good price. It runs.

“This would make a good hunting or farm jeep. It has the flathead 4 cylinder and standard transmission. The motor and trans are both good and four wheel drive works just fine. The block has been welded on but does not leak. I have a starter that I just had rebuilt that needs put back on it. It may need a carb kit to run real good but I had it running before we took the starter off. It’s kind of just an old hunting type buggy. The seats in it are good and the inside is in reasonable shape. It does need some work on the floor pans but it’s nothing that makes it not usable. I check email daily so just reply if you have interest. I can only provide a bill of sale but it has the Willy’s ID tag on it if you want to go to the trouble of registering it. I’d also entertain using it as partial trade towards a ’09 or newer Honda Rancher, Foreman, or Rincon 4X4 with reasonable hours.”

UPDATE: Was $1500. **SOLD**

Given the extra body and engine, this ex-Navy CJ-3A might be worth a look.

“Bought this jeep to build up but I have too many projects for this winter. Its a 1950 Military/Navy issued jeep. It has seen better days and has been layered in some spots with thin aluminum. Motor does not turn over but I have a good running motor and transmission/transfer case that is included. Also included is another complete 1949 Willys CJ3A body that can be put on or used for body parts. The Willys is very complete but needs a lot of love. Great father & son or daughter project! No Trades I need cash to finish other projects I have. No title for the navy jeep they did not title them when they were decommissioned.”

UPDATE: Still Available

“Have 3 Willy’s Jeeps for sale plus a ton of spare parts, including 2 rear ends, 1 motor, 1 front end, 2 trannies, os radiator and many other parts too numerous to list. The Jeeps are a 1946, 1948, and a 1950 model. All 3 run and drive and have been driven in parades etc. The 46 needs a battery. The 48 and 50 are licensed. 9K takes them all. Do not want to sell individually because I need to make room for my next project.

Call 304 645-5083 Do not reply to this email please. Call 304 645-5083”

http://swv.craigslist.org/cto/3985420635.html

Eric spotted this for sale. He writes, “This is a jeep about 10 miles from me. It is nice. It is in good shape with a M38 grill and is a CJ3A. It has replaced diamond plate front floors, rear floor and upper fender wells. Hat channel on drivers side has some repair.”