Runs.

https://www.facebook.com/marketplace/item/2171525539723520/

“1949 willeys CJ2 on none opt with DMV does run and lots of spare parts (cam shaft , head , transmission , ECT. ) 4000.00 FIRM”

The seller has a lot of money into this, but the jeep remains in pieces. The pic below was taken prior to it being disassembled.

https://www.facebook.com/marketplace/item/244281111765795/

“Hello, I have a 1952 Willys CJ3A project for sale. I have had it for about 25 years now and don’t see myself finishing it anytime soon. So it’s time for it to move on. I have about $12k into it and it’s still in pieces. I bought the replacement panels and $4k in parts (see lists in photos). I also had engine completely gone through, machined, and professionally rebuilt ($3k) with hardened vavle seat so it is good for todays gas. It has a Dana 44 rear axle, original heater, professionally rebuilt front and rear driveshafts, and quite a few spare parts including a spare transmission and transfer case. I also have a full steel hard top (no side doors) and a half cab/doors. Have clean title too. I also attached a couple photos of when it was together. I would like to get $6k because there is $4k in parts on the lists alone, $3k in the engine, plus everything else. Open to offers/trades especially a for 55’-59’ Chevy/GMC truck driver/solid project. Goose neck livestock trailer w/lvg qrtrs.”

This has a variety of updates, including a Warn OD. Note the various controls installed on the top of the inner windshield.

https://cosprings.craigslist.org/cto/d/colorado-springs-1951-jeep-willys-m38/7682327790.html

“-Ford 289 v8 (rebuilt less than 500mi ago)
-C3 transmission w/ B&M shifter
-T18 transfer case with warn overdrive
-Tires with less than 1000mi
-Rebuilt carb installed with engine rebuild (could use a tune now that engine is breaking in)
-Electric fan
-Vented hood
-Heater
-Electric wipers
-Soft top was installed about 2 years ago and less than 1000mi. Jeep parked under carport since it was installed
-has rear seat
-Front seats don’t match
Jeep runs and drives but could use a carb tune/ choke adjustment and general check over from sitting. Hasn’t been driven more than 100miles in the last year.
I have many spares including a performance intake manifold, spare engine that needs rebuilt, spare carb that needs cleaned and rebuilt, non matching spare wheel and tire, rear tire rack that’s not mounted.
I thought I would use this in the mountains while camping but have barely driven it in the 3+ years I’ve owned it. It’s time to move on and let someone else enjoy it. Asking $6000 OBO”

Engine is stuck.

https://www.facebook.com/commerce/listing/865529394886068

“1949 Jeep Willys Jeep CJ3A. Been sitting since early 80s, have Dana 25 axles to swap with a willys wagon frame. The willys is 100% complete down to the key and 6v battery from the 80s. The motor is currently stuck but has been bathing in mystery oil the last few months. It was parked due to front axle situation. No title but your local tow yard can get you one for cheap. The frame is solid however tub has some rot, which is reflected in the price. If you are looking for an unmolested project, here is your chance! ”

UPDATE: Still Available.

(10/10/2023) It’s a project that sounds like it must be sold.

https://yakima.craigslist.org/pts/d/naches-1953-willys-cj-3a/7667895223.html

“Selling my jeep due to divorce. I started complete down to frame restoration, I did all the no fun work leaving only the fun remaining. I have every nut and bolt. L 134 FLATHEAD MOTOR, I purchased 2 years ago and drove it home for disassembly, have changed the oil and filter, ready to roll. New carb, complete brake overhaul including new wheel cyclinders, shoes, springs, etc.. new master cylinder, radiator refurbished, new wiring harness, new ignition spark plug ignition wire set, fuel sending unit, speedo cable, brake lamp switch, anti squeak kit, body mounting rubber kit, accelerator linkage kot with throttle rod, many new parts im forgetting. frame wire brushed, painted, Cab rhino lined, bumpers, gas can spare tire rack sandblasted and powder coated. Entire body soda blasted and painted. Have original seats and custom seat with roll bar. I also have the overdrive for it. Have oringinal hard top, tires, doors, etc..This can be one nice jeep and actually already is. Just needs someone to complete it. I paid 7500 for it, prolly have another 2500 (at least) in new parts, and too many hours to mention.”

This has a government plate on the dash.

https://www.facebook.com/marketplace/item/873081710594716

“I KNOW IT ISN’T a JEEP PATRIOT but FB doesn’t list Willys and you can’t post an add unless you select SOMETHING so… Frame and tub are in pretty good shape. Needs motor. Rolls and steers easily. If you are looking to restore this model or make it an army jeep this is a pretty good platform to start with. Body panels are in good shape and the tub floor needs some work but is fairly solid. Frame underneath looks okay. This was supposed to be a restoration project but I realized I don’t have the knowledge or time so I would like to pass it on to someone else before the snow flies. Sat indoors for many years until about two years ago. Stays covered since. No title.”

Seller will sell both for $2500 or $1250/each.

https://www.facebook.com/marketplace/item/243928811615237

“Both Jeeps are not running, but have complete engines and drive trains. Will sell separately. $1250 each, OBO.”

A parts jeep that might be worth a look.

https://www.facebook.com/marketplace/item/245500894721821/

“1949 CJ3A body, frame, axles. Nice patina. Some extra parts included. No title. Price is firm.”

Unclear if there is much value, but appears to have an early head.

https://www.facebook.com/marketplace/item/986019492482178

“195? Willys CJ3a non running project jeep. Missing data plate will come with bill of sale. Located Auburn,AL”

UPDATE: Price dropped to $2850.

(05/25/2023) Doesn’t run at the moment.

https://www.facebook.com/marketplace/item/350376067339175

“Complete. All parts are here. Was turning the flywheel to tighten bolts and it got stuck. Not sure what the problem is but there was no impact, just a slow turn by hand. Should be an easy fix. The previous owner told me that the engine had been rebuilt. I never got far enough to find out. It rolls and stops. The 12 volt battery is good. I bought a new regulator and stater for 12 volts. About $400 for those. Running would b worth over $5,000. I am thinking $3,000 or the best offer close to that. Clear title. Kept indoors.”

This sounds like it needs some work, but unclear the scope needed.

https://portland.craigslist.org/clk/cto/d/brush-prairie-1950-jeep/7670067054.html

“The Jeep was a project for our father who was dealing with some family health issues. This Jeep was like a model he had in the early years. We had a local shop do what I would describe as a makeover. They cleaned and painted the interior and visible exterior surfaces. They made what repairs were required to make it run and drive. In the process we replaced the canvas top, seats, gas tank, tail gate, starter motor, emergence brake kit among other smaller items.
The family enjoyed seeing him driving the Jeep on our property and it was a great distraction for all of us. If you’re interested in a project like this, the makeover we did would be a great first step towards a restoration project. There is the usual body erosion to deal with. The original engine, running gear and steering gear will require repairs to some degree.”

Seller doesn’t appear to know what they have or what it is worth. My guess is that it has been sitting there a while. Value unclear.

https://portland.craigslist.org/mlt/pts/d/gresham-49-jeep-willys/7666835790.html

“Selling for my brother in law. No idea what I’m selling.”

UPDATE: Price dropped to $5200.

(07/15/2023) This one has some mods.

https://www.facebook.com/marketplace/item/1439337639962836/

“Oh1953 Jeep CJ3A Four wheel drive Buick V6 Runs and drives Good project vehicle Pink slip in hand”

No title. Has some rust.

https://www.facebook.com/marketplace/item/202394672674728

“1950-52 Jeep CJ3A, runs , new suspension and carburetor, plow , some parts, 1949 Jeep CJ3A for parts, no paperwork”

Parts jeep: