Tom shared this Capstan winch for sale.
https://www.facebook.com/marketplace/item/1030334931470248/
“Working winch very rare item, selling as is make an offer”
Tom shared this Capstan winch for sale.
https://www.facebook.com/marketplace/item/1030334931470248/
“Working winch very rare item, selling as is make an offer”
Could be worth a look.
https://www.facebook.com/marketplace/item/611822024390792
“Aluminum top and doors produced by Porter and Reed for a Willys CJ2A . Don’t know much about it, make me an offer.”
This is one of the military contract hardtops for the M-38.
https://www.facebook.com/marketplace/item/201510672687142
“Hard top for a Willys CJ2A. Asking $500 obo”
Douglas saved this wagon from a crusher. He’s hoping someone can use the parts.
https://jerseyshore.craigslist.org/pts/d/oakhurst-1962-willys-wagon-4×4-for-parts/7648562098.html
“i have on my trailer a 1962 willys wagon with a good title. it was saved from being scrapped. it does not run and the body is NOT restorable. the 6 cylinder engine spins free by hand . all the drivetrain is intact. complete truck can be delivered but you must get it off the trailer. it does not roll and had to be winched on to the trailer. must sell asap. make offers please. ask around. somebody could use this for lots of rare parts. 7 three 2 7 six 6 one 8 two 5.”
UPDATE: **SOLD** Was $500.
/Listed as a Meyers hardtop, this is actually a Koenig 555 Super Half Cab for the CJ-5.
“I got this Meyers half cab hard top for my ‘67 Jeep CJ5, but I am coming to the realization I will probably never get it cleaned up and on my Jeep. All glass is intact. Driver door is missing the hand crank. Would look great on a CJ6 as well. These are getting harder and harder to find for these old Jeeps. The last photo is what it would look like assembled. Located near the border of Riverton/Herriman, UT approx. 14000 South and 5200 West. Asking what I paid $500, but will consider offers.”
Seller has another parts top for sale, too.
https://www.facebook.com/marketplace/item/631299368409095
“Just surface rust. Was on a 1950s cj5. Erie PA 16510. All glass is plexiglass. I do have another CJ5 hard top for sale ( scrap ) but has the sides & rear Glass all intact. I’ll include if purchased.”
Looks like a good price.
https://www.facebook.com/marketplace/item/657698509569008/
“Cj 3-b tub new , in primer”
Jeff is selling this axle. Hopefully someone can use it.
https://www.facebook.com/marketplace/item/1120976382192663
“Dana 41 axle for 1947 CJ2A, 10-spline with tapered shaft. This is a Dana 41 axle for a CJ2A Jeep. The housing and axle tubes are in excellent condition. It has a relatively new ring and pinion along with pinion bearing and seal. The axle shafts are 10-spline with tapered ends for the hubs. I put new bearings on the shafts,but slots for the long woodruff key that holds the hub on is gouged out and would need repaired or replaced. Includes an extra long-side axle drive shaft that mate”
Andy shared this one. I rarely see these pop up for sale anymore.
https://www.facebook.com/marketplace/item/240091815456167
“Vintage Monroe 3 pt hitch for early Willys flat fender Jeeps. I have many other hard to find Willys parts available. Asking $2500. PM me directly with questions”
Included in the price is a rear PTO gearbox. Thanks to Andy for sharing it.
https://www.facebook.com/marketplace/item/1476715466464547
“IF AD IS STILL UP IT’S STILL AVAILABLE SELLING ALL FOR ONE MONEY Up for sale I have tons of jeep Willy’s parts all in decent shape haven’t been used in years what u see is what I have asking $1000 cash only pickup only first come first serve pickup is my house only selling as is where is if my price is to high I apologize but don’t need any negative comments thanks”
Andy spotted this one.
https://www.facebook.com/marketplace/item/1700546537086237
“PT1-T ramsey winch pto used on the willys trucks turns free and coller slides with lever”
Blaine spotted these doors for sale.
https://portland.craigslist.org/grg/pts/d/moro-jeep-cj5-doors/7640957792.html
“These were on a 1963 CJ5. $250. Windows do roll up and down but could use some lubrication.”
Andy spotted this steel drum pulley for sale.
https://www.facebook.com/marketplace/item/787031016254799
“Jeep , Willys PTO drive and Belt . Fits the larger of the two shaft diameters made Buyer pays shipping costs”
Roger Martin shared this ad for an original Ford GP Pintle hook, but I haven’t followed prices on these to know if this is a good one or not. (You can get repro versions on eBay for $175)
https://www.facebook.com/groups/460133987854448
“I’m looking to sell my ford GP pintle hitch prototype asking 500 located in vermilion Ohio willing to ship”
This should interest someone.
https://columbiamo.craigslist.org/pts/d/west-plains-willys-t90-spicer-18-warn/7625585276.html
“Willys T90 Transmission Spicer 18 Transfer Case and Warn 3326 Overdrive from a Willys truck. This listing is for a used but in good condition Willys T90 transmission with a Spicer 18 transfer case and a Warn 3326 overdrive. The listing also includes the transmission cover with the overdrive linkage cut out and the glove box door with the 4WD and the overdrive sticker. This unit came off a 1950 Willys truck”
Andy shared this ad. Seems like there is parts value in the f-head.
https://www.facebook.com/marketplace/item/937706507452629
“FC jeep engine and transmission from 1964 FC Jeep. Drive shafts included. see photo. Ran well when I removed it five years ago. body and frame scraped. Includes trans, apart. Bell housing and flywheel. No carb or generator. Pick up in Webberville Michigan. I can load crate (included)with high low.”
These appear to be from an early Koenig hardtop.
https://www.facebook.com/marketplace/item/221361780556764
“Came off a cj2a”
I don’t know what these for anymore.
https://www.facebook.com/marketplace/item/1292783654653042
“Linkbelt capstan winch kit, for early Willys CJs. Original components. New correct driveline and data plate. Complete with mounting hardware and rope. Jeep not included. Price is negotiable, would consider partial trade for Colt SAA .45”
CJ is selling this parts. You can contact him via the phone number or email in the top image. He notes that he also has some Jeepster parts.
I’m assuming $500 covers everything?
https://appleton.craigslist.org/pts/d/shiocton-willys-jeep-parts/7621622892.html
“Willy’s Jeep Parts including:
Two engines with transmission and transfer case. Engines need rebuilding.
Two radiators.
Two sets of front and rear axles.”
This seems a good price on the seats and cage. If I were closer I’d be checking these out.
https://phoenix.craigslist.org/wvl/pts/d/wickenburg-jeep-willys-cj3b-full-roll/7622826368.html
“Full family style roll cage with 3 race buckets with covers. May trade for ammunition or firearms. No reloads! Don’t contact me on ad if you are not willing to drive to Wickenburg. Seat mounts are tied into cage.”
Steven is selling this hardtop.
https://longisland.craigslist.org/pts/d/islip-kelly-hard-top/7613661154.html
“Kelly steel hard top and doors. Neg”
UPDATE: **SOLD**
Seller sounds ready to sell altogether or separately.
“53′ jeep willys parts. 2x roll cages, hoods, doors, fenders, grills, tub, axles, frame, straight 6 engine, 2 different manual transmissions, plus a lot of small parts. Condition of parts varies from very good to very poor. Let me know what you’re looking for and we’ll talk price.”
UPDATE: Still Available.
(02/24/2023) Here’s a rare Blue Star hardtop that needs a few repairs.
https://www.facebook.com/marketplace/item/1131435957572141
“$600obo Selling blue star top for cj2a. Everything is there for it, needs some frame repair on rear door and one side door.”