UPDATE: **Status Unknown** Was $200.
This looks to be a Sears Deluxe Aluminum Full Top (#4 in the catalogue), based on the CJ-3B page.
“RARE ALUMINUM WILLYS HARDTOP
ONE DOOR MISSING GLASS
CAME OFF 46 2A”
UPDATE: **Status Unknown** Was $200.
This looks to be a Sears Deluxe Aluminum Full Top (#4 in the catalogue), based on the CJ-3B page.
“RARE ALUMINUM WILLYS HARDTOP
ONE DOOR MISSING GLASS
CAME OFF 46 2A”
UPDATE: **SOLD** Was $600.
Could be worth a look. I don’t quite understand the description though.
“Motor and transmission jeep Willys working good 2 things i take out i have all the miselaneus any?”
Looks like the top needs glass.
“Hard top and doors for jeep cj2a, cj2b, cj3a, cj3b (doors need to be modified to fit the cj3b). Roll up windows. Needs some work but not too bad.”
UPDATE: Still Available.
Looks to be a Meyer Cab without the auxiliary side windows (see brochure at bottom)
“1975 Jeep CJ6 metal hardtop complete with doors and lift gate, good condition”
UPDATE: **SOLD** Was $750.
Looks solid, but needs some cosmetic work. Seller could be correct not he cab model.
“Half top for a willys cj5 or cj6 believed to be a koenig 355 with doors and full roll up windows. Very good shape and you can winterize your cj, all glass is good latches and hinges are in good shape, paint to your specifications and change the look of your machine , very good shape no rust other than on surface in the primer it was painted with”
UPDATE: **SOLD** Was $850.
This rare top looks in good shape.
“Jeep CJ5 (not CJ7), fiberglass hardtop by Acme. Fits 1976 and newer but will work with earlier CJ5 or M38A1 using a 1976 or newer windshield frame, ( I have some of these for sale). Very nice condition. Paintable to any color. $850. ”
Looks like a Sears cab.
“WILLYS CJ2A single cab / halfcab hardtop for civilian jeep 1946 1949 – $550”
It’s the hardtop only for sale. Needs some paint, but may be a solid hardtop.
“Got this hardtop for sale. Despite the looks it’s in pretty good shape. Call or text for details. If i cant sell it im going to scrape it. ”
I can’t tell if there’s a dent on the top’s upper passenger side or if that’s just dirt.
“ALUMINUM HARD TOP FOR FLAT FENDER JEEPS (CJ2A). TOP IS INSULATED AND IN GOOD SHAPE IT COMES WITH DOORS AND WINDSHIELD. GET YOUR HUNTING RIG READY FOR INCLIMATE WEATHER . (WINDSHIELD HAS A CRACK IN IT)”
UPDATE: **SOLD** Was $125.
Bill spotted these. Colin tells me these are “49-51 Jeepster, 2 WD station wagon, 49-53 “outies” –they are two piece with center circle raised. Stainless steel cap covering over a “baby moon ” plain hubcap.”
“I have a few sets of hub caps for sale. Take a look at the pix and let me know what you like. The Willys caps are $125.00.”
UPDATE: **SOLD** Was $300.
The shape of the top is Porter & Reed-like, but I’ve not seen one with those large windows. I wonder if they were added later?
“Aluminum Hard top for a willys cj2a with roll up window doors. ”
No pics, but could be a good price.
“Selling a soft top that was found in storage. It was never installed, so it’s new in the box, but the box was open. I believe all parts are with it, but would have to go one-by-one through the instructions. It looks complete.
It fits Willys Jeep MB models. 1941-45
That model top was discontinued by Bestop, and now they sell only the CJ2A civilian & newer models. I believe the only difference is the windshield frame height, as they indicate in the instructions page, it is 23 vs 25″. I don’t know if it can be adapted to work on other ones other than swapping the windshield frame. This is black crush – aka vinyl shiny black.
Asking $360 picked up in Canton, MA. ”
http://boston.craigslist.org/sob/pts/5777891086.html
It’s needs some work, but this top can be shortened into a top for a CJ-5.
“Factory Jeep hardtop for a ’65 CJ6. This top is complete but has rust on the bottom of the sides. Only surface rust present except for the left & right side which are corroded as shown.
Very unique top as is fits both a CJ5 and a CJ6 – the center section removes for CJ5.
All windows intact, doors, and liftgate all complete and all hardware, hinges, etc are included.
Looks to be quite restorable with some repair to the sides, the PO had welded the top to the Jeep body.
No dents or damage other than the rusted areas as shown.”
UPDATE: **SOLD** Was $225.
Doug spotted these.
“Pair of original Jeep seats (drivers and passenger seat). Not sure what year or model Jeep — possibly Willys, CJ, CJ2a, CJ3a, CJ3b or CJ5. Seats are in good condition with a few minor tears. Frames and springs are in excellent condition. Front seat adjuster works well, but is only latching on one side.”
UPDATE **SOLD**
“I have a lot of various Jeep Parts for sale that will fit FC150, FC 170, Willys Wagon and Truck and CJ5 and CJ7. The list includes but is not limited to:
Willys Super Hurricane Flathead 6 cyl engine with starter, carburetor, clutch, flywheel, waterpump, distributor and bellhousing – $350
Stahl Utility Bed special made for FC170 – $200
FC Doghouse Covers – Sets of early and late style – $40 per set
FC Steering Column including steering wheel and steering box – $70
76-86 CJ5/7 304 factory V8 motor mounts – $50
T90 to Chevy V8 adapter with bellhousing – $75
Extremely large aftermarket gas tank for Willys Wagon, Truck or FC – $65
FC Dash with a couple extra gauge holes – $25
FC clutch and brake pedal assy – $50”
All could use a little work.
“Arctic cab for M38-cj2A
Hard top m38A1-cj5
Half cab for A1-cj5
All need some clean up but still in good shape
All have doors and need work’
Seller has an extra set of doors for it, too.
“Allstate Jeep Body Model #7346111/Sears, Roebuck and Co. Good condition. Extra doors. Came off a 1946 CJ2A Jeep.’
UPDATE: **SOLD** Was $400.
Looks like there’s value here.
‘1955 Willys Jeep 3B body parts for all. Includes grill, right and left fenders, radiator, headlight buckets and rings, air cleaner, steering column and steering box, driveshafts, clutch and brake assembly, pedals, entire steering tie rod ends, choke and throttle cables, and electrical switches (high and low beam, starter switch), and much more. All original equipment. ”
UPDATE: **Status Unknown** Was $500
(08/16/2016) Has a little rust.
“I have a Kelly Hardtop off of a 1952 CJ3A. It has been kept in a shed up off the ground. It also has some minor surface rust, no holes. The lift gate is included. I also have new safety glass for it. The little windows in the back make this item even more desirable.”
No titles is sellers name.
“For Sale: (3) Willy’s Jeeps. 1946-1947; standard / manual on the floor. (1) of the Jeeps is a bonified MB the other two are CJ’s. However, one of the CJ’s has a Ford GPW frame.
The MB has a #2 chipped piston and does not run–this motor is pristine inside, but someone assembled the distributor gear in backwards when it was rebuilt, so it was 180 out, hence the chipped piston. I have four brand new pistons that go with this jeep.
The CJ’s/Ford both have Willy’s L-head / flat-head motors and do run. Not one of the jeeps for sale are driveable, but they are all three rolling chassis.
One has a gear reduction starter installed. All three have very nice 12V conversions done.
Jeeps are in various stages of repair / mock-up. All the parts are either installed or in boxes. One is severely rusted and will need a new tub.
First $3250.00 in cash O.B.O. takes all three jeeps. Will consider trades WITH cash.
I do not have title in my name to any the jeeps I am selling. The Ford Framed Jeep with the CJ Grill and tub does have an open title; (not in my name.).
Please do not text me and ask me for more pictures. If you want more detailed pictures, please give me a call first; (voice call), to confirm you’re serious and interested in coming to buy the three jeeps. If you’re interested in just buying parts, let me know what you need and I’ll see what I have. I will send pictures after we have spoken.
You buy all three jeeps for $3250.00–YOU GET ALL MY SPARE PARTS, EVERY SINGLE SPARE WILLY’S AND FORD PARTS I HAVE.
We are about 14 miles SSE of Temple, TX. 76571–Salado.
*If you’re reading this add the jeeps are still for sale.
**I will deliver for gas, mileage and my time; that includes my return trip, provided you’ve paid for the jeeps in advance, in cash.
Thanks”
Ted has some more parts for sale. You can view many more higher resolution images here:
https://willysjeeppowertakeoffparts.shutterfly.com/pictures/8
“Willys Jeep Power Take Off and related Parts and Implements for Sale , Call evenings 860-429-4080 or Email willysted@charter.net
I will try my best to return all calls and reply to all emails
Some of the items included are as follows
PTOs
PTO Drive Shafts
Rear Output Shaft Gear boxes
Governors
Newgren Single Bottom Plows
Bantam Trailer
Winches , and much more
I will update post through comments section as to availability of parts and whats been sold ASAP
Thanks for your interest
Ted”
Looks like a good price for the combo.
“Fisher Snow Plow and a Sears Aluminum Half Cab for a Willys CJ2 or CJ3. May fit other models.
All hook-up parts, Hoses, Pump, and Controls.
Terms are Cash from Your Hand to Mine.”
UPDATE: **SOLD** Was $500.
Looks in good shape.
“Up for sale is a Meyer steel top with doors and crank windows for a willys/jeep cj5 ’54-’75. In decent shape as pictured. Comes with mounting hardware. Black exterior, white interior with some rust and adhesive residue. Good visibility model with 3 rear windows.l”
UPDATE: **SOLD** Was $75.
This just might be a Boston Top. It lacks doors and a rear hatch. Here are others for comparison.
“WILLYS METAL TOP WAS ON A 1946 WILLYS FLAT FENDER,NO DOORS OR BACK DOOR ASKING $75.00 .”
A: Bodies
B: Tranny & engine parts
C: Various parts