UPDATE: **SOLD** Was $150.
Looks like a good price.
“Willys Jeep 1950-1952 Military Olive Drab Soft Top
-Used but in very nice conditions
-Includes top as shown
-$150.00”
UPDATE: **SOLD** Was $150.
Looks like a good price.
“Willys Jeep 1950-1952 Military Olive Drab Soft Top
-Used but in very nice conditions
-Includes top as shown
-$150.00”
UPDATE: **SOLD** Was No Price.
Seller has a variety of parts for sale. These are pics from two different listings.
1. I have a Jeep CJ5 Steel Tub for sale. $600. Lots more jeeps and parts to be listed. Also have CJ7’s, Willys Wagon, Jeep Foward Control FC170, Commando, CJ8 Scrambler
2. I have a Jeep CJ5 Chassis with Engine for sale. Missing front clip. Unsure of year. No title only a bill of sale. http://prescott.craigslist.org/pts/5093305122.html
UPDATE: **SOLD** Was $500
Seller is selling parts.
“Selling the extra parts from my 1943 willys project. What’s included in the package is as follows:
Body tub with brackets that are bolted to it, and the original Gages minus the speedo
Front fenders, good usable condition, need new braces welded in
Hood, again good usable condition except the rear most bracket needs repair
Both drivers and passengers seats are included. The passengers seat is perfect. Drivers seat has some rust that’s needs repair on the seat bottom only.
No pics provided.
“I have lots of parts for willys jeeps 1942-1975 please text me for your needs ”
No pics provided. Might be a great price.
“Brand new it has one small hole. These are $999.00 new”
Possible a Porter Reed top?
“This came off a 1951 CJ3A. It’s all there and although there is a lot of surface rust in the photos, it is in solid condition with no rust-through. Glass is missing/broken throughout. CJ3A IS NOT INCLUDED! :o)”
The windows on the doors look a little dark.
“Soft top and doors for Willy’s CJ-3B kept in the garage. Great condition. Hardware included.”
Wade has two military hardtops for sale along with an M-38 and a CJ tailgate.
He writes, The Hardtops I’m looking at $500 each. Negotiable. And the tailgates $75 for the M38 and it has hole on the bottom part but has been sandblasted, the CJ has hole and not sandblasted and $25 for it.
For $100 this looks like a good price for the right person.
“Need to get rid of all my spare parts before I move. Great deal for someone, everything for $100. Need to sell asap.
Some of the stuff includes engine block, tranny, two transfer cases, radiator, coil, rear drums and pads, brake springs, 2 fuel pumps, bell housing, exhaust, brake lines, fuel lines, steering column, drive shafts, and more.”
Good buy?
“hi – i have had this heavy duty radiator in my shed for a few years now and would like to sell it if theres anybody local enough that can pick it up in person.
thats why i priced it cheap at 100 bucks as i dont want to ship it at this point. its heavy. i had purchased this fc170 radiator from a forward control specialist in phoenix arizona who had it re-done previously for his v8 powered project and then used it for a while and then sold it to me when i needed it for my project.
think i paid 250 or 300 bucks for it — it is a 3 or a 4 row and fits the fc-170 trucks only i believe.
you can see on fan side of core where there was a small repair done where his electric fan rubbed a hole into it but was fixed and was supposed to be ready to use.
anyways , looking for 100 bucks and please come pick it up , also have a couple seats from another fc-170 truck that you can have for free. just come and get them – might fit fc150 too. ”
http://dallas.craigslist.org/ndf/pts/5063231274.html
UPDATE: **SOLD** Was $150.
“For sale is a vintage PTO1 Ramsey winch. According to my dad, it originally came off a 1951 CJ3A. He later installed it on his 1970 CJ5, perhaps with slight modification. It was working when removed over 30 years ago. Has been stored in the barn ever since, but we were just doing some cleaning and decided it’s doing no go to anyone there. It is being sold untested. Seems to be complete except we can’t find the one shift handle. I really don’t know much else about it, so I’m assuming and hoping that you do if you’re looking at it.
If you aren’t a buyer but think you know something worth sharing with me about this winch, it would be kind of you to do so. This includes the value, because we’re not too sure what it’s really worth to anyone.
Asking $150 or best offer. Keep in mind that “or best offer” could possibly mean either a smaller or a higher figure than the asking price!”
Doug spotted this post.
“Two Jeep or Willys side shift transmission housings.One housing has both shift levers and both forks.The other is a bare case.Asking $50 for the case with forks and levers and $35 for the bare case.Also have to fit the side shift t90,one NOS shift lever #642898 and four NOS shift forks#640378.Lever or forks $15 each.Cash only call before 8 pm.No text.Thank you.”
UPDATE: **SOLD** Were $25.
Someone must be interested in these.
“Jeep Renegade 2 Hood decals.Nos hood decals for 1971 Jeep renegade 2.One side of hood stripe is missing.Part number 985615.$25 cash only call before 8 pm.No text.Thank you.”
UPDATE: **SOLD** Was $400
“Metal tub – stamped JEEP
Windshield
Hood
Front Fenders
Dashboard
Tailgate”
UPDATE: **SOLD** Was $1800.
“1947 flat fender jeep with v8 sprint car engine
1960 Willys pickup super hurricane six motor
Lots of parts trailer full plus bed of pickup is full of parts multiple transmission,transfer cases and axles
All for $3000.00 will deliver if close enough and soon! ”
Chris is selling these hoods. The price looks good.
“I have various willys hoods from CJ2A’s CJ3B’s and CJ5’s. I will be in Toledo this coming weekend 5-30-15 picking up numeous parts and would like to sell as many of these hoods as possible. I do plan on keeping the Willy’s Wagon hoods in the pics provided. PLEASE NOTE:
THE GRILLES IN THE PICTURES ARE NOT FOR SALE, ONLY THE HOODS.
I am selling the hoods for $35 each hood. Please be aware you will have to pick these up on-site at location 562 South Reynolds Rd, Toledo OH 43615. Also, you will need to pick up between 9am and 12noon.”
The price is right. Looks like it has some usable parts.
“Willys 134 CU (?) 4 cylinder F head engine out of 1961 FC150. Complete – not running – appears rebuildable.”
No pics provided. Send seller an email and he’ll check on part availability.
“I have willys jeep pickup, wagon, CJ2a, FC-150, CJ5 parts for sale. I have Many parts so if you are looking for any parts e-mail me and I will check my inventory. I also have pics of the parts available.”
Never installed.
“New in box, box has been opened but top was never put on Jeep. Asking $700.00 O.B.O. Please call and leave a message and we will get back to you asap.
Kit includes doors, latches, bows and all necessary hardware. When folded, all hardware and the top stay together. Snaps are concealed on the top for a smooth look. In most cases, snap locations match factory-installed studs. Click-shut doors have twist style handles. Side and rear curtains roll up safari-style for maximum shade and ventilation. Adjustable foam-covered bows provide a skin-tight fit.”
Looks like there is value.
“PTO for 1946 Willies Jeep.”
UPDATE: **SOLD** Was $500.
(03/29/2015) Parts jeep.
“I have a 1946 Willys tub and front end for sale. It’s titled and fairly solid. Needs a passenger floor patched but it’s a great start for a flatrod or crawler build. I was planning on using it for a flatrod but I really have no time for it. A ford solid axle will be included with the tub. Not selling parts, take the whole thing. I have some low back seats I can throw in as well.”
UPDATE: **SOLD** Was $300
I don’t see any doors included.
“I have a Hard Top 1/2 cab off of a 1963 Willys Jeep, new paint and new rear Glass and weatherstrip.
$300.00 or trade?”
Looks like a Porter Reed top to me.
“I was told this was for a willys jeep. Asking $100 obo. What you see is what’s included. 2 doors , window frames for the doors and some kind of channel.”
UPDATE: **Status Unknown** Was $100.
“Artic aluminum too for Willys CJ2A jeep. It has sliding windows and doors.”