Runs and drives. It could be worth a look.
“Original Hurricane motor, original body with Willy’s stamps, hard top, new gas tank and lines, new fuel pump, new wheel cylinders, new brakes, tires in great shape, never seen salt and runs great.”
Runs and drives. It could be worth a look.
“Original Hurricane motor, original body with Willy’s stamps, hard top, new gas tank and lines, new fuel pump, new wheel cylinders, new brakes, tires in great shape, never seen salt and runs great.”
UPDATE: **SOLD** Was $7000.
Jay spotted this one. It’s listed as a 1949. It’s missing the column shift and the early windshield, so this might be a mix of parts.
“Runs…. bad starter
good fixer upper
10049 serial number
call for more information”
UPDATE: **SOLD** Was $1895
Both have titles. Might be a good deal.
“I have 2 willys jeeps for sale. Both are 1948 models.. Both have complete drivetrains, but the motors do not turn over. I have titles for both jeeps. refer to pics for condition. Asking 1895 for both. call”
UPDATE: **SOLD** Was $8900
It appears solid.
“Fresh restoration – only 50 miles since completed. New radiator, rebuilt motor, rebuilt carb by Rick’s Carbs in El Cajon, new fuel tank, seats, exhaust, and rebuilt brakes. Jeep runs and drives great, very clean but not perfect. Includes best top vinyl top and doors. Licensed in ca. ”
UPDATE: **SOLD** Was $5000.
Pics show an Idaho license plate. Might not be registered.
“selling 1952 Willys Jeep because I have no time for it. it has a Buick 231 v6 with jeep 3 speed transmission with PTO. has pto powered winch. original hard top and doors. straight body no cancer or dents.”
UPDATE: **SOLD** Was $7500.
This is a mix of parts. May have a MB/GPW body.
“4WD
Standard shift
6-Cylinder Studebaker Engine
PTO Winch
New tires and brakes.”
UPDATE: **SOLD** Was $4000.
It’s a project that has a column shift. I wonder if they year is wrong?
“RARE (3 SPEED ON COLUMN), new tires and steering wheel. This is a project, it is in a disassembled state.”
UPDATE: **SOLD** Was $4500.
If you like big wheels, this might be for you.
“The motor is a 350 with a 400 crank in it Holley street dominator intake . Dana 18 transfer case . 4speed tran . 44″ super swamper , 6 hole wide aluminum center line looking wheels . It needs a little work on the frame , and hydraulic steering. Great project! Runs great!”
There looks to be value here.
“1954 Willy’s Jeep CJ-33 – runs, new clutch, new 12 volt starter, motor smokes. Has Jeep Hy-Low hydraulic pump for snow plow. Tub shot. $750 OBO.
Also available 1947 Willy’s CJ-2A parts: tub, hood, fenders, tailgate and windshield frame. Has some rust but if you are restoring a CJ-2A, these parts are worth looking at. $500 OBO. ”
This It doesn’t have a fuel inlet. It is also missing drain holes. Maybe has a replacement body?
“1948 Jeep Willy, project vehicle as is,. asking $1200 or best offer”
A couple days ago Glenn Byron was driving to a local Parking Lot Hot Dog Stand Display in his DJ-3A “Miss Willy” when a 90 year old driver pulled a left turn right in front of his bright yellow Jeep. The driver claimed the sun was in his eyes and he didn’t see glenn. Glenn hit the brakes, leaving about 5 foot skid marks from all four wheels before impact.
A nearly new Subaru was the victim, hit on passenger side, side air bags deployed, and probably totaled. The impact caused Miss Willy to flip onto her drivers side and slide a very short distance.
Miss Willy has bent frame, broken windshield, whole nose screwed up, and who knows how much more.
Fortunately, Glenn seems to be okay, though he did get hit on the head pretty good, causing him to be a little foggy. He’s not sure, but he believes he was ejected. No one seems to know of for sure.
Miss Willys before the accident:
UPDATE: **Status Unknown**
Four non-oringal jeeps for sale. $5,000 each buyout or best offer for all. Click the links below for photos of each jeep (from photobucket).
1. 1942 Jeep
2. 1942 Jeep
3. 1951 Jeep
4. 1952 Jeep
“*Rebuilt Engines*
*Run Great*
**No classic/original parts*
$5,000 each buyout or best offer for all
UPDATE: **SOLD** Was $4000.
(02/28/2014) Lots of updates, including a fiberglass body.
“I’ve had this for a few years and I’ve had a lot of fun driving it! it a 1949 chassis and a fiberglass body.
its a great little rat rod if you like getting attention at car show or just driving around town.
the motor has a noise a valve maybe. I have driven it like that since I have had it. the seats are original jeep seats. last time I drove it to a local car show and parked close there was more people around it than any vehicle and kids love it!
PS As you can see I bend the water can, but it didn’t hurt anything else, it has three bolts holding it on. If I don’t sell it I’m going to order the original can holder and a new can that works, for around 75 dollars, thanks for looking!”
UPDATE: **Status Unknown** Was $3000
Looks solid. It’s a left hand drive model.
“74 jeep dj5 232 motor, auto, runs and drives great. I drive it every day. Lots of brand new parts. Has a radio, it’s fun to drive and it gets a lot of looks, it’s a 2 seater. You can put a seat in the back. I hate to sale but I need a 4×4 truck im asking $3000 or trade text or call”
Needs brakes and new clutch.
“1946 willys jeep 302 V8 not an every day driver but could be with some TLC. runs and drive needs some brake work. soft top only few years old recently had new clutch installed. to many projects need to let this one go. please dont waste my time serious people only.”
UPDATE: **SOLD** Was $6500.
What is on the front bumper? Some kind of hand?
“1948 Willys Jeep CJ2A, military tires, all gauges work. Runs great.”
Lots of mods on this CJ-6.
“Would like to trade my CJ6 for a dune buggy or a side by side or 4×4 4wheeler. Text me with what ya got. Jeep runs good needs a few minor things like one of the front locker hubs a rear brake line and power steering pump”
A project that includes a warn overdrive.
“Willy’s flatfender project. Has 4.3 TBI crate motor low miles when pulled from donor vehicle. Advanced Adapters motor mounts and headers. Brand new aluminum radiator. Two sm465 manual 4speeds Dana 18 with warn overdrive. Lift, confer shackles, 31 inch cooper discovers with no miles. Roll cage kit that needs assembled. Aluminum hard top. This is a project and not in running or driving condtion $2500 firm”
UPDATE: **SOLD** Was $1500
Does this mean it runs?
“INCLUDES ALL PARTS NEEDED FOR RESTORATION EXCEPT THE ENGINE. LOTS OF PARTS ARE NEW. APPROX. $2000 WORTH OF NEW PARTS. ”
Needs engine work.
“I have a 1942 jeep for sale it has a 3.8 v6 it has 38.5 inch tires it needs a crank kit”
These two photos were taken at Kendall’s Rare Bird Farm in 1948 showing Frances Freeman. It has since closed, though I have no additional information. Note the odd rear rim.
Field Marshall Sir Thomas Albert Blamey was memorialized in a monument in the Royal Botanical Gardens in Melbourne, Australia. It shows him standing while gripping part of a jeep windshield. The way a July 1955 Willys News described it, I thought there’d be a whole jeep!
This was part of the training exercise at the Air Force’s Advanced Glider Detachment in Mobile, Alabama.
Steve spotted this postcard that shows both the snowplows and the options for equipment behind the jeeps.
View all the information on ebay
Scott’s selling another round of reproduction knobs.
“3D Reproduction Willys Sliding Window & rear ashtray knobs, they are 100% accurate 3D printed knobs.
This listing is for 4 knobs (4) (two pair) IVORY knobs and DOESNT include the Sliding Window lock itself nor the rear ashtray itself.
They are dimensionally 100% accurate 3D printed knobs. They are printed with a unthreaded pilot hole to either attach to the sliding window lock stud or to the cover mounting screw for the rear ashtray. The material is stronger and better, in every respect, than the original bakelite plastic.
If you are interested in BLACK or only two knobs (2) (one pair) see my other auctions. Free shipping by USPS within continental US, I will ship worldwide for actual cost incurred, but only after my advance authorization.”