To Top

Koenig CJ-5 Hardtop Erie, PA $400


Seller has another parts top for sale, too.

“Just surface rust. Was on a 1950s cj5. Erie PA 16510. All glass is plexiglass. I do have another CJ5 hard top for sale ( scrap ) but has the sides & rear Glass all intact. I’ll include if purchased.”


To Top

1963 CJ-5 Delta, CO $6500


This might be worth a look depending on what “TLC” is needed. It sound like it might not be running. It has some early Free-Lock hubs.

“1963 Jeep Willys CJ5 with Koenig1/2 cab. Jeep will run. Needs some TLC. Fun little jeep.”

1963-cj5-delta-co8 1963-cj5-delta-co9

To Top

1954 M-170 Vincennes, IN $6000


It’s a project.


“This is a project, bring a trailer. Included are both driver and passenger seats, correct windshield frame, correct spare tire carrier, lower litter rails, dash bar, NOS medic light reel, repro top bows, original hood with original registration numbers, front and rear lift shackles, 4 correct military rims with good tires along with other parts. Tub is 98% rust free with all the floor support hat channels in place and not rotted out. Has an engine sitting in it with transmission (engine ran when set in) and will include the transfercase. $6000 (pretty firm on price). Will write a bill of sale. NO TRADES!”

To Top

1943 GPW West Hills, CA $3500


UPDATE: Correct pics now posted (thanks Allan).

The body has been modified and there seems to be some CJ DNA in that body.

“Hard to find Ford GPW jeep with all new floor huge tires 2 new aluminum gas tanks new spring leafs with ford 289 and transmission came out of running vehicle have some extra parts for engine”

1943-gpw-westhills-ca7 1943-gpw-westhills-ca8 1943-gpw-westhills-ca9

To Top

1947 CJ-2A/Suzuki Samurai N. Battleford, SK, Canada $2000


Joe-in-Mesas shared this custom flattie.

“Willyzuk project. 47 cj2a/ 82 Suzuki samurai.”

1947-cj2a-suzuki-sk7 1947-cj2a-suzuki-sk8 1947-cj2a-suzuki-sk9

To Top

1954 CJ-3B Centennial, CO $5500


UPDATE: Still Available.

(03/16/2023) This 3B is partially disassembled. The seller posted an early Kelly hardtop brochure as one of the pics, but he actually has a Kelly series 23 top produced in the 1960s. The TC is likely a Dana 18 (not Dana 41) and the diffs are likely Dana 25/44 (not 18/44).

1954-cj3b-denver-co6 1954-cj3b-denver-co7 1954-cj3b-denver-co8 1954-cj3b-denver-co9

“1954 WILLYS CJ3B. ALL ORIGINAL! CLEAN TITLE! BARN FIND! This CJ3B only has 38,715 original miles? It was purchased for a ranch in Colorado and stayed in family. This CJ3B also had the option for the HARD TOP. All glass is original and intact. NO CRACKS. I began the project and cant finish. Motor runs fine and was running before I started to restore. I was going to keep it all original. F4-134 Hurricane 75 HP engine, T90 3 spd. trans, Dana 41 TC, Dana 18/44 diffs.

Grill is perfect and blasted ready for paint. Hood and fenders are blasted and can be repaired for dents, etc. Or you can buy new ones. Hood is also blasted. NEW tail gate. Original seats are reupholstered! The radiator has been rod cleaned and tested. Rust is all surface rust. Some rot in tool box. Could be repaired. Lots or new parts ready for restoration completion; NEW suspension, New gas tank and sending unit, NEW shocks, NEW Floor pans, NEW 6 volt battery, NEW tail light, NEW; Mirror and arm, Grill webbing, Clutch and brake pedal felt, Oil hose and filter, E Brake cable, Battery hold down, Accessory pedal boot, Light switch, Wood hood blocks, Brake adjustment cover, body mount, fuel line tubing.”


To Top

Year? CJ-2A? Visalia, CA $2850


UPDATE: As Craig notes, it has a 2A frame and body.

Looks like someone did a spring-over on this one, but decided to keep the drivetrain dropped.

“1954 Willys Flat Fender With everything except the engine . Bought for a project just don’t have the time .”

year-cj3a-visalia-ca5 year-cj3a-visalia-ca6 year-cj3a-visalia-ca7 year-cj3a-visalia-ca8 year-cj3a-visalia-ca9

To Top

1947 CJ-2A Colorado Springs, CO $3000


UPDATE: Still Available.

(06/20/2023) Seems worth a look. It includes a Sears Deluxe hardtop.

1947-cj2a-cs-colod7 1947-cj2a-cs-colod8 1947-cj2a-cs-colod9

“This Willys CJ2A is in pretty solid shape with good floors, tub and frame. I haven’t found any severe rust that I’d worry about. The paint is peeling up, but the panels are quite straight and ready for a new coat. It has a soft top under the hard top, a spare tire carrier and all the glass. This little champ ran and drove when I got it, the previous owner had put an industrial l134 under the hood. It had a head gasket leak and enough water got into the crankcase that is developed a knock. I shut it off immediately, so that motor is definitely rebuildable. I put the original motor back in it, an l134 that was recently rebuilt before seizing from sitting. I got the pistons free but one of the valves is still stuck, I’ll continue trying to break it loose. No title. I’m looking to sell it for the 3k I have in it, since I don’t time for it anymore or the facilities. Ask me anything else you want to know!”

To Top

1957 FC-150 Gunnison, CO $2500

• CATEGORIES: FC150-FC170-M677

UPDATE: Price dropped to $2500.

(03/13/2023) It’s supposed to have a front/back PTO setup, but no pics of it.

“1957 narrow front axle Jeep FC150. not a common vehicle. This one has chain drive PTOs front and rear, and an intact front window! These are known for frames cracking and this one needs a few places repaired. Comes with both axles. Has 4cyl hurricane, unsure if it runs or not. Definitely a project but an interesting one. Comes with a bill of sale, but won’t be hard to get a title for it. Bring a trailer, of course!”

61957-fc150-gunnison-co 1957-fc150-gunnison-co7 1957-fc150-gunnison-co8 1957-fc150-gunnison-co9

To Top

Germany’s Salzgitter’s Line of Jeeps

• CATEGORIES: Advertising & Brochures, Features, International

UPDATE II: Here’s another 1950 Salgittzer brochure from Germany, but it is only four pages. Thanks to Jan for sharing it! This makes three different 1950 brochures.

1950-salgitter-brochure-4page-1 1950-salgitter-brochure-4page-2 1950-salgitter-brochure-4page-3 1950-salgitter-brochure-4page-4


July 12th UPDATE: I received both of the Salzgitter brochures I purchased out of Germany. The 1950 brochure is a version lacks several of the pages shown in the brochure at the very bottom. The 1949 brochure is a tiny (1/4 sheet-size) one-page brochure.

Continue reading

To Top

“Boom Jeep” @ The Cathedral Basilica of St. Louis

• CATEGORIES: Features, Fire/Police/Industry Vehicles

Tracy spotted this jeep that’s helping the restoration at The Cathedral Basilica of St. Louis. The photos appear on the church’s Facebook page. The jeep was there through the end of last week (ending July 14th).

It appears the fronts springs have been removed. And, it looks like the front end is a Dana 25 or 27. That’s about all I can make from it.

catheral-basilica-stlouis-boom-jeep0 catheral-basilica-stlouis-boom-jeep2

To Top

Video Reviving a 1965 CJ-5

• CATEGORIES: Features, videos

Mike shared this video of Davin and Jeff working to revive this 1966 CJ-5 with a Meyer Cab. Made in Canada, the serial number places the production of this jeep at the end of December.

To Top

Ogelsby Jeep on eBay

• CATEGORIES: Features, toys

The buy-it-now price is $50 and shipping is only $15. The gold appears to be added over the original red. But, looks like a fine buy.

View all the information on eBay

“This is a oglesby jeep selling as is do not know any thing about them cast aluminum”






To Top

1951 CJ-3A Hemlock, MI $9900


This appears to includes a rear PTO plus gearbox and drum pulley.

“1951 Willy’s Ag. Jeep”

1951-cj3a-hemlock-mi6 1951-cj3a-hemlock-mi7 1951-cj3a-hemlock-mi8 1951-cj3a-hemlock-mi9

To Top

1961 CJ-5 Van Nuys, CA $8500


Lots of stock jeep here. This has a Koenig hardtop and a set of early Husky hubs.

“1961 CJ5 100% original CA barn find survivor. Aftermarket factory installed hard top has never been removed. All windows and glass good and functioning. Everything works. Owner told me the Jeep had a re-spray in the 70’s but you can’t tell because it’s faded and the patina. Paint will shine with a buff and wax but I don’t like my cars like that. Took this in on partial trade as part of my collection but do not need it. It came with a Jeepster and some other parts I needed. Unmolested and uncut. No modifications. Original factory installed side steps. Drive as is or lift it. Head turner everywhere I park it. Brand new industrial battery. Brand new tires. Dropping off Monday (7/10) at carburetor shop to rebuild it, so it runs perfect. It has a little dead spot that I don’t like. No leaks. Engine bay is perfect. Zero rust. Original rubber floor mat. Push button starter. 4WD, locking hubs and transfer case all working. 12 volt vintage glass dome light installed but nothing cut or drill”

1961-cj5-vannuys-ca94 1961-cj5-vannuys-ca95 1961-cj5-vannuys-ca96 1961-cj5-vannuys-ca97

Continue reading

To Top

1947 CJ-2A Sulphur, OK $14,000


This may have a replacement body. Either way, it looks solid.

“1947 Willys Jeep. 350 Chevy
4 speed granny Detroit lockers
High performance
New tires new battery
Manual transmission
28,000 miles
To much to list”





To Top

1948 CJ-2A Wickenburg, AZ $11,000


Looks like a nice rig. Has an engine update.

“1948 CJ2A runs amazing. Has rebuilt Chevy 153 4 cylinder, Chevy 4 speed manual transmission, and Chevy steering. Brand new aluminum radiator with shroud, new hoses, and thermostat. Freshly rebuilt carburetor, new brake lines throughout, newer tires, newer battery, new fuel pump/lines/ and filters. Just replaced head gasket, oil pan gasket, and valve cover gasket. Very reliable and a blast to drive.”

1948-cj2a-wickenburg-az6 1948-cj2a-wickenburg-az7 1948-cj2a-wickenburg-az8 1948-cj2a-wickenburg-az9

To Top

1957 FC-170 Onalaska, WA $3000

• CATEGORIES: FC150-FC170-M677

UPDATE: Price dropped to $3000

(10/08/2021) Blaine spotted this marriage between an FC-170 and a Corvette chassis. It appears there’s plenty of work left.

“1957 fc150 on modified 1981 corvette frame. Little to no rust, most metal work done. Have new windshield and rear glass. Doors repaired new floor pan. No engine or trans. Have stock dash.All reasonable offers considered. Willing consider to trade for farm quad +cash”

1957-fc170-corvette-onalaska-wa1 1957-fc170-corvette-onalaska-wa2 1957-fc170-corvette-onalaska-wa3 1957-fc170-corvette-onalaska-wa4

To Top

1967 CJ-6 Perkins Diesel Windsor, PA $11,500


Matt shared this rare Perkins diesel. It has the correct serial number plate for a diesel, too. It does have rust.

“1967 Jeep CJ-6 with Perkins diesel engine. All original and minimal rust compared to most CJ’s of this vintage. Very rare Perkins diesel engine runs but will need rebuild. It will run but smokes excessively and is low on power. Injection pump and injectors have been rebuilt. Production numbers suggest that less than 600 CJ-6’s were built with the Perkins engine. The body and floors have rust in all of the typical locations but is not a total rust bucket. Please be familiar with the rarity of this Jeep before you criticize the asking price. Clear Pennsylvania title included. All low ball offers will be ignored.”

1967-cj6-diesel-perkins-windsor-pa4 1967-cj6-diesel-perkins-windsor-pa6 1967-cj6-diesel-perkins-windsor-pa7 1967-cj6-diesel-perkins-windsor-pa8 1967-cj6-diesel-perkins-windsor-pa9

To Top

1969 CJ-5 Mesa, AZ $1500


At this price, it deserves more pics and a closer look.

“1969 CJ needs complete restoration very clean body title in hand. Once again this vehicle needs a complete restoration it does not run! Will make someone a great builder/project.”


To Top

Repro CJ-3B Tub Black Canyon city, AZ $2400

• CATEGORIES: Body Parts, CJ-3B, Parts

Looks like a good price.

“Cj 3-b tub new , in primer”


To Top

Dana 41 Axle Leavenworth, KS $300


Jeff is selling this axle. Hopefully someone can use it.

“Dana 41 axle for 1947 CJ2A, 10-spline with tapered shaft. This is a Dana 41 axle for a CJ2A Jeep. The housing and axle tubes are in excellent condition. It has a relatively new ring and pinion along with pinion bearing and seal. The axle shafts are 10-spline with tapered ends for the hubs. I put new bearings on the shafts,but slots for the long woodruff key that holds the hub on is gouged out and would need repaired or replaced. Includes an extra long-side axle drive shaft that mate”


To Top

3 CJ-2As, 2 CJ-5s, M-38 + Parts Glennville, GA $13,000


UPDATE: Price dropped to $13,000.

(06/272023) Seller wants to sell as a lot. Only the 3 2as and 1 CJ-5 are pictured (unless the pics confused me).

“Selling all my jeep stuff at one time,
49 CJ2A with title running driving stopping lots of new parts
Two 47 CJ2As one runs will shift 1st and reverse the other is complete drivetrain parts jeep
Two CJ5s one 1960s runs drives, other complete drivetrain parts jeep believe 55
M38 with new aftermarket tub in the middle of a frame off with a bunch of GPW stuff
2 engines already been through machine shop, 2 extra M38 tubs one maybe salvageable other parts, extra M38 frame, extra CJ frame
And a bunch of other parts, too many to list”





To Top

1946 CJ-2A Nebraska $3600


This has some updates, including a different sort of carb and exhaust setup. The top is from Porter & Reed.

“1946 willys Jeep 2.8 GM V6 $3,600 located in northeast Nebraska”

1946-cj2a-ne6 1946-cj2a-ne7


To Top

Year? FJ-3A No Price


The sellers of this are getting some evaluations of the powertrain before deciding upon a price. But, they posted it on Facebook. I’m not sure where it is located either.

year-fj3a-1 year-fj3a-2 year-fj3a-3 year-fj3a-4