To Top

Fiberglass Racing Body Selah, WA **SOLD**

• CATEGORIES: Body Parts, Racing • TAGS: .

flatfender_racebody_selahUPDATE: **SOLD** Was $250

“flat fender race jeep body with fenders,& grill lengthened by 8+” narrowed by 12″ $250 firm call”

 
To Top

1965? CJ-3A? Austin, TX **SOLD**

• CATEGORIES: CJ-3A • TAGS: .

1965_flatfender_austinUPDATE: **SOLD** Was $2600

These hunting jeeps from Texas crack me up.  They are certainly unique, each one of them.

“I have a 1965 Willys jeep that is set up for hunting. It has gun racks, bow racks,air drive feeder, adjustable winch w/lights, game basket and much more. Runs good, I am asking $2600 or best offer, I would also consider trade for 250 or larger four stroke dirt bike. Please call with any questions. Thanks.”

 

 
To Top

1945 MB Casa Grande, AZ **SOLD**

• CATEGORIES: MB

1945_mb_casagrandeUPDATE: **SOLD** Was $3500.

The pictures are too far away to tell much about this jeep.

“Sweet 1945 Willys jeep for sale With all the original Front and rear seats 4×4 works great and The engine runs good also.  Asking $3500 obo call me if you’re interested.”

 
To Top

Year? GPW Pipe Creek, Tx **SOLD**

• CATEGORIES: GPW (Ford MB)

year_gpw_pipecreekUPDATE: **SOLD** Was $1000

This GPW is beat up, but it does have some Ford script on it.

“this is a rare ford gpw like the willys jeeps. it is an early 1940’s vehicle. vehicle ran up until about 6 months ago but the trans started to have some problems and it was parked. motor is good and rest of drive system is good. tub of body is in poor shape. front half is good but back is very bad. this vehicle also has a wench that works off the transfer case to the front. wench is a ramsey. vehicle has military style rims on it also. it is hard to come by these old ford jeeps. this jeep also has the plates on the glove box that relate to the old ford jeeps.”

 

 
To Top

MB/GPW Helena, Mt $550

• CATEGORIES: GPW (Ford MB), MB

early_mb_helenaThis appears to be a WWII body along with other parts.  The body doesn’t look too bad.

“WWII vintage jeep. Great restoration project. Comes with two hoods, four fenders, extra frame,original tranny, and a motor and radiator from a 1982 CJ. Call 461-6894”

http://montana.craigslist.org/cto/1089826990.html

 
To Top

1951 CJ-3A Crawford, Co eBay

• CATEGORIES: CJ-3A

UPDATE: This is back on ebay with no reserve

1951_cj3a_crawford1951 CJ-3A: Interesting paint job

“I am selling a 1951 Willys CJ3A jeep. The jeep looks to be all original except for the front and rear axle and a few other small parts. It has the ww2 jeep axles under it. The jeep’s body is in good shape and since there has been a hard top on it for years there is vary little rust. No gone through rust in the floor. The engine looks like it may have been rebuilt, it runs good and strong, the carburetor will need to be rebuilt because it needs to be choked for it to run good. The jeep has the original foot starter…”

View all the pics on eBay

 
To Top

Builds — Sand Drag Jeep from Santa Barbara

• CATEGORIES: Racing • TAGS: , .

I ran across this great looking Sand Drag Jeep called Impulsive Behavior.  From what I learned off the website, the owner’s name is Tim and he is a member of the Santa Barbara 4WD Jeep Club. Tim also owns a nice looking CJ-3A as well.

Impulsive Behavior “has a 468 cubic inch BBC generating just under 800Hp with almost 600 lb-ft of torque. This power plant will move the 2100 pound vehicle to 82 mph in 4.04 seconds on a 300 foot long race track.”

You can view more pics of this jeep and other vehicles owned by Tim.

impulsive_racing

 
To Top

Fiberglass Flat Fender Bobcat Hood Puyallup, Wa **SOLD**

• CATEGORIES: Body Parts, Racing • TAGS: , , .

bobcat_hood_fiberglass_portlandI am pretty sure this sold

It looks in excellent shape.  I didn’t see any of these classic hoods at the swap meet (or they had already sold).  Having Don’s old card in the glass is a cool benefit.

“Vintage Aftermarket Jeep Hood for CJ2A CJ3A M38 MB & GPW. This “Bobcat hood” is a real find. The fiberglass has no cracks and the hinge works good. You can tell its vintage because there is a business card in the glass for (Don Prine’s) Prine’s Jeep Service and the phone # is JU 4-6648. So I would guess 60’s or before. The hump can give your air filter more room if you have a V-6 or V-8 under your hood. And it looks good..

 
To Top

1950s CJ-3A Montana Vista, Tx $1000

• CATEGORIES: CJ-3A • TAGS: .

1950_cj3a_montanavistaNo drive train.

“1950 Willys jeep shell. No drivetrain. Tires junk. No lift, solid body for project. No interior, all offers. 383-3185”

http://elpaso.en.craigslist.org/cto/1086319053.html

 
To Top

1948? CJ-2A Winstead, Mn $2,995

• CATEGORIES: CJ-2A • TAGS: , .

1948_cj2a_winsteadA reader named Jim forwarded this interesting CJ-2A.  The body appears in very good shape.  It sports a column shift and a PTO.  It appears to have a CJ-3B windshield. With the 3 dash panels and the column shifting, I’d guess this (or part of it) is actually a mid 1946 rather than a 1948.

“GREAT WILLYS RUNS AND DRIVES GREAT 3SPD PTO WINCH TOW BAR 2 EXTRA SPARES NICE SHAPE TURNS ON A DIME WILL GO JUST ABOUT ANYWHERE TRADES WELCOME BRYAN”

 
To Top

1958 FC-150 Canby, Or **SOLD**

• CATEGORIES: FC150-FC170-M677

1958_fc150_canbyUPDATE:  **SOLD** Was $750.

Looks like a good parts FC-150.

Here’s the new ad:

“its all there dose not run real early short wheelbase narrow track,no title 750.00 offer trade??? WILL BE AT PIR SWAP MEET pitt aera by pitt wall can e-mail pics”Here’s the old ad text:

“willys fc150 short wheelbase narrow track 4X4 pickup its pretty ruff but mostly all here 4cyl motor (not running) 3-speed,kinda rusty but good for parts or ??? this thing is very short the bed is as long as the wheelbase,no calls after 6:pm please,Leroy 503-515-2970”

 
To Top

Stay Tuned — A Reader finds a Ford GP

• CATEGORIES: Bantam-FordGP-WillysMA-EarlyJPs, Builds • TAGS: .

I got word earlier this morning that a reader located a Ford GP.  Here’s an early look at the find.  Boy, is he excited.  I’ll provide updates when I learn more.

img00015

 
To Top

Builds — 1946 CJ-2A Restoration

• CATEGORIES: Builds

dscn4785Here’s another project by Matt and Edmund Angelus Automotive.  Like the other restoration projects I’ve seen from Matt, this one is a beauty.  I have no doubt Matt’s clients loved the results!  Thanks for sharing!  You can contact Matt at 540-354-4321 for more information on having your project jeep finely restored.

Matt writes:

“This is latest to emerge from Edmund Angelus Automotive, a 1946 CJ-2a.  This was originally a Boyer Fire Jeep. This unit came to us literally carried in pieces, taken apart way beyond necessary for 3200 mile vehicle. Build time 22 weeks.”

Continue reading

 
To Top

1953 CJ-5 Parts Whidbey, Wa $500 (OD or PTO?)

• CATEGORIES: CJ5

1953_cj5_whidbeyislandIt appears there are four levers (tranny, two tc, and either an OD or a PTO), but I can’t tell which.

“I have a 53, ideal for a parts vehicle. Four intact fenders, Hood, and straight body. Transmission lost 2nd gear, so it has been sitting for long enough to where the motor needs a rebuild too. I know it has enough parts on it to warrant the price, so i am not very flexible.
Call anytime, if i don’t answer, LEAVE A MESSAGE!! (360)320-3080.  Bryan”

http://bellingham.craigslist.org/cto/1045156651.html

 
To Top

1946? MB Fair Oaks/Folsom, CA **SOLD**

• CATEGORIES: MB

1946_mb_fairoaksUPDATE: **SOLD** Was $1000

Based on the pics from craigslist and eBay, this is an MB body and grille.  I would hazard a guess that the rest of this is an MB as well.

“i have a 46 willys jeep it has a corvette 283 hi low transfer case i was going to rebild it but i lost my job have to move cant take it with me have all part for some one to bild it make me a good offer or a good trade . call me no email thanks”

 
To Top

1958 CJ-3B Hartford, Ct $1700

• CATEGORIES: CJ-3B

1958_cj3b_hartfordIt appears this CJ-3B has not tailgate.  I’m not sure if that’s a customization or not.  I have not heard of CJ-3Bs that have no tailgates.  The body looks pretty rough.

“1958 Willys jeep CJ3B. Needs a new Body. It has lock out hubs, Superlift suspension and 32″ Coopers. It runs with an auxillary fuel tank and needs a carb rebuild. Engine is nice and quiet, transmission shifts good, 4×4 works. I was using it in the woods untill a front brakeline broke. Good candidate for restoration, or a woods beater with a little TLC beforehand. Email – cpc69@aol.com.  Phone – 860-455-1013”

http://hartford.craigslist.org/cto/1086009841.html

 
To Top

1949 CJ-2A Fairfield, Tx **SOLD**

• CATEGORIES: CJ-2A • TAGS: , .

1949_cj2a_fairfieldUPDATE: **SOLD** Was $950.

The back of this jeep appears to be solid.  I can’t tell for sure.  It also appears this jeep has a full floating rear end.  Obviously, the body has been modified a bit.

“49 Willys Jeep 950. obo as is.”

 
To Top

1956 DJ-3A Hickory, Pa $1500

• CATEGORIES: DJ-3A

1956_dj3a_hickoryIt looks pretty stock, has no engine and sports a column shift.

“Im cleaning out the barns for the spring, here is a 1956 Willys DJ-3A. Has the column shift, with factory hard top, and sliding doors. No Engine, has transmission, and all correct column shift parts. Body is in decent shape with some surface rust, and a little on the floors. Call Brandon at 412-818-9570 or email me….lets talk. Engine that is in pics does not come with, it is an incorrect engine.”

http://pittsburgh.craigslist.org/cto/1082040929.html

 
To Top

1947 CJ-2A West Slope, Co No Price

• CATEGORIES: CJ-2A

1947_cj2a_westslopeI can’t tell much about the body  from the pics.

“i have a 1947 willys jeep in good shape, no rust on body or inside just bit under. has brand new engine with 40 miles on it and new transmission with 300 miles on it. front disc brakes, lockers front and back. with lockable hubs all four tires so you can tow it nice and easy and choose what tire you want to spin. im intrested in a bumper trailer or toyota motorhome.”

http://westslope.craigslist.org/bar/1079890706.html

 
To Top

1973 CJ-5 Queens Creek, AZ **SOLD**

• CATEGORIES: CJ5

1973_cj6_queencreekUPDATE: **SOLD** Was $8500.

“THIS 1973 cj 5 JEEP WAS RECENTLY PAINTED AND FITTED WITH A NEW FUEL TANK BETWEEN THE FRAME RAILS. IT HAS A CUSTOM ROLL CAGE, BACK SEAT AND SPARE TIRE CARRIER. IT HAS NEW SEATS WITH 6 POINT HARNESSES FOR DRIVER AND PASSENGER. IT IS A NEW AUTOMATIC TURBO 400 TRANSMISSION AND TWIN STICK NP 205 TRANFPER CASE. IT HAS NEW BILSTINE RESOVOIR SHOCKS. HAS FLAT FENDERS, NICE FRONT AND REAR BUMPERS AND ROCK SLIDERS. THE DRIVE SHAFTS ARE SOMEWHAT NEW. IT HAS DANA 44’S FRONT AND BACK WITH DETROIT LOCKERS AND 589 GEARS, THE JEEP HAS BEEN STRETCHED AND THE TUB MOVED BACK FOR A TALLER GUY LIKE MYSELF. ALSO I HAD CROSS OVER STEERING ADDED A WHILE AGO….”

 
To Top

1949 CJ-2A Tempe, Az eBay

• CATEGORIES: CJ-2A • TAGS: , .

1949_cj3a_tempeUPDATE: Now on eBay. Many more pics and very detailed description — if only all sellers were so precise!

This jeep looks fantastic, but I am surprised someone would do all this work and not replace the 41 rear end with a Dana 44.  Note that this is the original tub, but the tailgate has been carefully removed.

“1949 Willys CJ-2A Jeep which has been mildly customized and modified for off-road and everyday usage around town. This Jeep has been professionally done with attention to detail and function, incorporating many modern upgrades yet still keeping the period CJ-2A look. Although this Jeep has the look and capabilities for serious off-roading it has never been driven on anything but hard surfaced highways. It has been re-powered with a Chevrolet 283 small block backed by Muncie 4-speed transmission and goes like a bat-out-of-hell, but has plenty of low-end torque for any situation.”

View all the pics on eBay

 
To Top

1960 CJ-3B Rector, Pa eBay

• CATEGORIES: CJ-3B

1960_cj3b_rectorummm … all original?  This must have been purchased with the woody option?

“THIS JEEP IS A 1960 WILLYS  ALL ORIGINAL cj3b model  with a F134 4cyl. engine 3spd. manual trans. 4×4 all original hardware starter has been rebuilt body will need to be replaced if you want or can be fixed. History of this vehicle is that i bought it off a army vet. i was going to rebuild it but i did not have the time. but i would like to sell it to a person that will want to restore it to its original condition.”

View all the pics on ebay

 
To Top

Leaks in a Transfer Case and a T-90

• CATEGORIES: How To

A reader sent me the following question.  He’s in the process of doing work on both :

What is the best way to stop leaks in a transfer case and t-90 transmision? Do you have a any tips?

My answer was the following:

I have found the most success using liquid gasket and following the directions (as I remember them) …
1. Clean the parts carefully
2. Put on the liquid gasket and put it on with bolts finger tight
3. Wait 24 hours
4.  Tighten to spec.

Anyone have additional thoughts, tricks or alternative ideas?

 
To Top

1951 CJ-3A Portland, Or $2500 or trade

• CATEGORIES: CJ-3A

1951_cj3a_portland2There’s a knock in the engine, but otherwise this might be a pretty good jeep.  The pics aren’t great, but it looks like there have been suspension and frame upgrades.

“beautiful willys the only thing is is that it has a knock in the motor and have not started it in over a yeear and a half but a awesome jeep have a full soft top and doors and a bikini top but no half doors looking for a nice boat for the lake this summer/nice fishing boat/old car /nice road bike or crotch rocket/nice jet ski or two / or let me know what ya got”

http://portland.craigslist.org/clk/boa/1081273751.html

 
To Top

1946 CJ-2A Lakeview, OR **SOLD**

• CATEGORIES: CJ-2A • TAGS: , .

1946_cj2a_lakeviewUPDATE: **SOLD** Was on eBay.

This looks like a nice CJ-2A.  It does have some rough spots on the rear left corner.

“1946 Willys CJ2A SN:53163 Clear Oregon title.  Jeep has had frame off restoration with some exceptions. Floors have been pached wear needed or replaced. Hat channels have been repaired wear needed or replaced. There are three thin spots that have been cleaned on the tub can be bondoed but I prefer not to use it. I have tried to leave as original as possible. Jeep is approx. 90% original, engine is out of a 49 Willys PU. Oil psi about 55 when operating 40 @ an idle. Approx. 200mi. on a new clutch, pressure plate and throw out bearing…..”