To Top

1949 Jeepster Lansing, Ia eBay

• CATEGORIES: Jeepster This site contains affiliate links for which I may be compensated.

1949_jeepster_lansingI’m not a big fan of the smaller wheels up front, but it’s pretty hot looking otherwise.

“This is a 1949 Jeepster with a 440 six pack motor.  Has been in the family for 50 years.  Has been kept inside at all times.  I am selling because I have no time to drive it and enjoy it, hopefully someone else will enjoy it as much as I did when I had the time.  The car has a mopar 440 six pack engine, bored 0.60 over, has large racing cam, carborators have jet kit put in them, 727 transmission with shift kit, 3000 stahl convertor.  Pictures show car with 4 barrel no six pack ….”

View all the pics on eBay

 
To Top

MB or GPW Tulsa, Ok $3000

• CATEGORIES: GPW (Ford MB), MB This site contains affiliate links for which I may be compensated.

year_mb_gpw_tulsaUPDATE:  Price dropped to $3000

It’s probably a bit much for a non-running project.

“WW2 jeep project includes your choice of MB or GPW frame. Both in good restorable condition. Older ” new” body kit with new tube, fenders, and hood with original grille and complete windsheild. Running WW2 era engine, T-84 transmission, all 3 seat frames and misc. parts. A very solid project. $3500. Call 918-836-7583 or 918-231-2133″

http://oklahomacity.craigslist.org/cto/1217766661.html

 
To Top

Builds: Dan’s Grandfather’s CJ-5 Part II

• CATEGORIES: Builds This site contains affiliate links for which I may be compensated.

You’ll remember we first met Dan and his CJ-5 from his discussion of his Hudson Steering to Saginaw Swap.

Dan has provided us with some additional coverage of the resurrection of his Grandfather’s jeep.  This might just become a series :-).  Besides, I’m a sucker for anyone will to take the time to breath life into the family jeep.  There’s plenty of people who would have junked this CJ-5.  Thanks for sharing Dan!

Dan writes, “One of the great things about a Jeep project is that you can work on all the little things while you save up for or look for those parts for the big jobs. Here is a brief look at some of my smaller repairs.  First, here is the project Jeep. A 1955 CJ5. [editor’s note:  the front shackles were reversed on this CJ-5 which produced some understandable discussions about whether this was actually a M-38A1.  Clearly it’s not :-).]

more_cj5

Starting with the gas tank, after cleaning all the surface rust off of the gas tank, I discovered a series of little holes. Now you can easily find an after-market steel or plastic tank, but for about $5 I may be able to fix it.

more_cj5_1

Here is the gas tank all cleaned up and patched with epoxy (JB Weld).  If it works than I saved about $100. If it doesn’t work, well then it didn’t cost me too much to give it a try.

more_cj5_2

Continue reading

 
To Top

Seat Cushion Examples

• CATEGORIES: Features, Website • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  These are no longer for sale.  I keep this post just for ideas.

jims_seats

Jim writes, “I’m tired of not having anything out there anymore for Willys. For example, the only replacement seats you can get for an early Willys are either military or black vinyl.  How boring! There are no more bikini tops of any variety – everyone pretty much runs the same boring top.  Continue reading

 
To Top

1964 CJ-3B Columbia, Mo **SOLD**

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

1964_cj3b_columbiaUPDATE: **SOLD** Was $3500.

This is a nice looking CJ-3B, but what’s going on with the rear springs?

“1964 CJ3B Jeep runs & drives – 4X4 works – has F134 motor, an extra transfer case, and a metal top with doors. Will take $3,500.00 OBO.”

 
To Top

1947 CJ-2A Sedalia, Co $3200

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

1947_cj2a_sedaliaThis jeep has a variety of upgrades, though it’s having some difficulty with 2nd gear.

“I am selling my cj3a to make room for my other projects. It has a 4 bolt 350 chevy with an sm420 truck 4 speed, dana 20 t-case, dana 44 rear end and stock front. Brand new 33.12.50 BFG mud terrains. Completely rewired with painless harness. Needs brake work and the rebuilt 4 speed still has trouble shifting into 2nd. Does run and drive (I drive it to work on Friday’s and weekends). Call for more info. Jason 720-275-8121”

http://denver.craigslist.org/cto/1216124531.html

 
To Top

1947 CJ-2A Yakima, WA **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

1947_cj2a_yakima4UPDATE: **SOLD** Was $3500.

“1948 FLAT FENDER WILLYS.  350.  4 SPEED.  roll cage.  427 gears. 4 wheel disc brakes.  on board air.  spare tire carrier(gas cans).  2 fuel pumps 1 electric 1 mechanical. a 8274 warn winch.  duel flow master exaust. LOCKED FRONT AND REAR.  TOW BAR.  LIST GOES ON AN ON”

 
To Top

1953 CJ-3B Plymouth, MN **SOLD**

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

1953_cj3b_plymouthUPDATE: Was $2995. **SOLD**

The seller lists this as a 1953 GB2.  I thought that was a mistake until I did a search and discovered that this probably means this jeep is part of the second round of serials numbers for CJ-3Bs.  In other words, it’s a pretty early CJ-3B.

“1953 Willys GB2. B style so room for new engine. 12 Volt System. Valve stuck in the original flat head. Tranny, lock outs, and diff good shape. Good wheels and tires. I don’t have time to rebuild. Great project. Licensed as collectable. $2,995 or BO.”

 
To Top

1960 CJ-3B San Juan, Puerto Rico **SOLD**

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

1960_cj3b_puertoricoUPDATE: **SOLD** Was on eBay.

Here’s the first jeep I’ve ever featured from Puerto Rico and what a beauty it is.

“For Auction Beautifull 1960 Jeep Willys, it has been in the family since new, only one owner. It was recently restore by professionals. Everything in great working conditions.

 
To Top

1953 CJ-3A Tempe, Az $2000

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: A reader provided some pics.  He notes it’s in pretty good shape, but the seller is ‘a bit difficult’.

“Solid jeep stored indoors,no rust built in tow bar, v/6 buick engine,plenty of power,asking 2000.00 obo call mark at 480-217-1386. has license plate and i have a clear title.”

http://orangecounty.craigslist.org/cto/1214984773.html

1953_cj3a_tempe

 
To Top

1942 MB Spotted in Downtown Boise, Id

• CATEGORIES: Builds This site contains affiliate links for which I may be compensated.

Here’s a very nice looking 1942 MB (or is it a GPW?) that a reader spotted in Boise a couple days ago.

photo

photo2

Continue reading

 
To Top

Fiberglass Flatfender Body Roseville, Ca $1000

• CATEGORIES: Body Parts This site contains affiliate links for which I may be compensated.

fiberglass_flatfender_body_rosevilleThis looks like a lighter duty fiberglass body similar to the fiberglass body I used on my first jeep.

“Replacement fiberglass tub for all flat fender Willys Jeep models. Comes with high-back, brand new, fiberglass seats with lap belts. Also has a perfect grill. This tub is in excellent shape, no holes and its never been mounted. The grill and tub are ready for your paint! This will shorten your project by months! Please call Mark @ 916-295-9157 for more information.”

http://sacramento.craigslist.org/pts/1215559995.html

 
To Top

1954 CJ-3B Westminster, MD **SOLD**

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

1954_cj3b_westminsterUPDATE:  **SOLD** Was No Price

The body looks a little beat up.

“Good condition with V-8 and automatic transmission and 35” tires. Runs and drives good.”

 
To Top

1948 CJ-2A Niles, MI **SOLD**

• CATEGORIES: CJ-2A, Unusual • TAGS: This site contains affiliate links for which I may be compensated.

1948_cj2a_nilesUPDATE: **SOLD** Was on eBay

This jeep has undergone a number of changes.  The seller has added detailed artwork to the hood, while underneath is a nice looking V8.

“You are bidding on a 1948 Willys jeep, that I have owned for 25 years, After sitting for a number of years in Nov. of 2007 I redid this vehicle, the following is a listing of what was done. New brakes and lines and master cylnder, wheel cylnders and parts associatted. New fuel tank, lines, fuel pump and 2 bbl. rebuilt carb. Rebuilt 350 turbo trans, new driveshaft, u-joints, trans mount, new torque converter and flex plate. 305 Cu. In. 175 HP small block with under 35000 miles. new radiator, hoses, belts, water pump (corvette), trans-cooler and lines. new ss flex fan, all new wiring, switches, bulbs, seats and interior redone, mostly new gauges, headers with 2-1/2″ exhaust to the rear….”

 
To Top

1946 CJ-2A Great Falls, Montana **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

1946_cj2a_greatfallsUPDATE: **SOLD** Was $3500.

“Chevy 350, 4 bbl carb., powersteering, 12 volt alternator, spring over lift, 35×12.50×15 tires, 8 inch rims, orginal axle and transfor case, has orginal tran.with v8 bell housing, but trans. is bad. I have T350 to go with the jeep. Also, this is a millatary body. Also, have spare axles and frame.”

 
To Top

1947 CJ-2A Fresno, CA **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

1947_cj2a_fresno4UPDATE: **SOLD** Was $2200

It’s still a project.  It needs seats, wiring and probably more.

“47 willys good shape set up for a v8 chevy have headers toyota axles ,over spring steering ,new wheels bad tires , no seats are wireing its a project!!

 
To Top

1961 CJ-6 Halifax, Ma **SOLD**

• CATEGORIES: CJ-6 This site contains affiliate links for which I may be compensated.

1961_cj6_halifaxUPDATE: **SOLD** Was $2000

This 1961 CJ-6 hybrid appears in pretty good shape.  But what inspired the design?  Rust in the body maybe?  Maybe something in the water in Maine?

“61 Willys CJ6 Custom Jeep Narrowed Down 23″, Wheel Base is 77” Runs Great! Willys 4 Cylinder 3 Speed, Soft top $2,000. “

 
To Top

1948 Jeepster Stratford, Nj $2500

• CATEGORIES: Jeepster This site contains affiliate links for which I may be compensated.

1948_jeepster_stratfordUPDATE:  Still Available

This might make a nice project.  The body appears in good shape with all its chrome.

“one CUTE 4 passenger CONVERTIBLE Jeep … 1948…. runs well .. brakes are done… finish it off and have a CUTE FUN car !!! Xtra parts included…. call SKIP at 856-309-8808 or e mail SKIP at blacktieclassics@aol.com ….$2500 ..we have SEVERAL project cars for sale and over 500 collector/classic cars on our website… blacktieclassics.com .. stop in and see all of our classics ….. and take this Willys home ….”

http://southjersey.craigslist.org/ctd/1213149061.html

 
To Top

1946 CJ-2A Old Lyme, Ct $6700

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

1946_cj2a_oldlymeHere’s a pretty red ’46 (thanks Jim).

“Beautiful 1946 willys jeep cj 2A. New old/new stock all steel body. Original hood, grill, windshields, and tool box. New interior. Run well with no smoke. Not a spec of rust any where.  New brakes/ lines, tires, rebuilt carb. This jeep is driven about 100 miles every sunny weekend with no problems. Needs very little to be perfect. More pictures available upon request. 860 227 3854 ”

http://newlondon.craigslist.org/cto/1213480250.html

 
To Top

1950 CJ-3A Bend, OR **SOLD**

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

1950_cj3a_bendUPDATE: **SOLD** Was $3000

There’s been some body work done on the driver’s side near the step.

Original drive train except Warn overdrive has been added. No rust. Runs and drives good. Not many originals left like this.”

 
To Top

1953 CJ-3A Orange Beach, Al eBay

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

1953_cj3a_orangebeachHere’s another one of these Willys/Toyota hybrids.  It appears to have been a well executed transformation, though the front bumper is a little underwhelming.

“This auction is for my 1953 Willys Jeep built using my many years of experience owning and using lifted Jeeps as daily drivers.The very clean Willys Jeep body is mounted on a Suzuki Samurai frame. This was done to gain a light weight, fully boxed, straight and rust free frame.  I installed a Toyota 20R mated to a Toyota 4 speed transmission and 2 speed transfer case. These were bought with about 80,000 miles on them per the previous owner.The engine starts immediately and does not smoke. I upgraded to an electronic distributor and purchased a used MSD box (works great). I am also running a remanufactured Holley 32/36 carburetor.The transmission shifter has a lot of play but there are no issues with how it works (it does not  pop out of gear or make noises).  A new clutch was put in when the transmission was installed.”

View all the pics on eBay

 
To Top

1954 CJ-3B Yakima, WA **SOLD**

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

1953_cj3b_yakima1UPDATE: **SOLD** Was on eBay

‘Complete frame off restoration.  3500 miles (yes 35 hundred) on rebuilt 2300 CC ford 4cyl: Novak 2300cc adaptor plate, Custom motor mounts, Bored 40 over (with torque plate), balanced/blue printed, RV cam, Vacuum Brakes, Hydraulic Clutch, Custom Steering system with Power Steering, new Weber carburetor, Front Spring Shackles Reversed, 6 point nascar tube roll cage, 3 point seat belts …”

 
To Top

1960 DJ-3A Surrey Wilmington, NC $**SOLD**

• CATEGORIES: DJ-3A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $30,000

“This 1960 Willys Jeep DJ Gala Edition Soft Top Coupe features a 4 cyl cyl Gasoline engine. It is equipped with a 3 speed manual transmission. The vehicle is Pink with a Pink Vinyl interior. It is offered As-Is, extended warranty is available. AM-FM, Wheels, Vinyl Interior Surface – Contact Eric Lotz at 910-815-1055 x2 or sales@fleetleaseremarketing.com for more information.”
1960_dj3a_surrey_gala_wilmington

 
To Top

1949 CJ-3A Simsbury, Ct eBay

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

1949_cj3a_simsburyUPDATE:  Back on eBay

This is a CJ-3A with a M-38 body and some stainless additions, such as the grille and jockey box.

“You are bidding on a beautifully restored 1949 Willys Overland Jeep.  It was aquired by a father and son in Utah who did much of the major restorations between 2000 and 2003.  During that time it also ran one of the Moab courses.  In 2003 it was purchased by a collector in Connecticut who did little more with it than store it in a heated garage.  I bought it in 2007.  The chasis, engine and drive train are original CJ3A (civilian) and the body is a steel M 38 (military).  It has after market front lock out hubs.  It is painted Subaru Electric Yellow.  The electrical system is 12 volts … reach seller directly at 860-966-0292

View all the pics on eBay

 
To Top

Builds: Dan replaces the Hudson with a Saginaw

• CATEGORIES: Builds This site contains affiliate links for which I may be compensated.

Sometime back, Dan’s grandfather had replaced the stock CJ-5 steering with a Hudson steering mechanism.  However, the bell crank has seen better days, so Dan decided to upgrade to a manual saginaw.  Upgrading to the manual saginaw is rare these days (see various steering upgrade options here), so it’s a nice treat to have Dan document his work for us.  Thanks Dan!

Dan writes:

Here is the Jeep soon after I picked it up from my grandfathers old ranch. I had already started to disassemble it. It’s a 1955 CJ5 which he purchased in 1959. About ten years ago he told me that his best guess was that it had about 500,000 miles on it. It has seen a lot of abuse and he made many modifications to it. That’s a Hudson steering wheel and column.

cj5_1

As you can see in this close up, the frame is broken clean in half just in front of the divers side front wheel.

cj5_framecrack

The bellcrank where he relocated it. It was just about ready to literally fall off. All the welds were broken and only one bent bolt was holding it on.

bellcrank_cj5

Continue reading