UPDATE: **SOLD** Was $1500.
(10/04/2014) It’s a stretched body.
Willys Fiberglass Drag Jeep Body
Has been widen & extended
Approx: length 122in. (10ft. 2in) width 60in. (5ft.)
Would make a great sand drag jeep / dune jeep / rock crawler”
UPDATE: **SOLD** Was $1500.
(10/04/2014) It’s a stretched body.
Willys Fiberglass Drag Jeep Body
Has been widen & extended
Approx: length 122in. (10ft. 2in) width 60in. (5ft.)
Would make a great sand drag jeep / dune jeep / rock crawler”
UPDATE: **Status Unknown** Was $4500.
(09/15/2014) Has a fiberglass 3B body.
“Cj3b fiberglass tub and hood. 231 buick. Just rebuilt t90, warn overdrive and 18 t case. 33 inch m/t.”
UPDATE: **SOLD** Was $1000
Listed as a CJ-6, this looks more like a CJ-7 body.
“New just took out of box 1986 jeep CJ6 fiberglass body”
No pics provided.
“Fiberglass tub, hood, fenders with clean title $1000
Boxed early 70’s cj5 cj 5 frame $400
Front and rear Dana 44 from 77 wagoneer $250 each
Will sell as package for $1500”
This runs, but needs a battery. Body is fiberglass.
“I have a 67 CJ-5 for sale. I had to buy this vehicle to obtain the one I really wanted. I’m 6 ft 4 in and too big to drive this comfortably.I have done nothing to it. It has a fiberglass body with original metal hood. A Dauntless V-6. 3 speed tranny, new tires and rims, new dual exhaust, a plow, frame is solid and painted, speedo works and shows 42,831 miles. I think the roll bar is for a CJ-7, has high back buckets, I did purchase a hard tin/metal top with glass windows and both metal doors with crank windows. Jeep is painted gun metal grey, top and doors are army green and top has lift back window. I drove it home and drove it once more to get the plow blade. That was almost two years ago. It had no battery when purchased and I used mine to drive it. So no battery in it. Put extra Stabil in tank with fresh gas, and fresh antifreeze then also. Asking $6000 OBO. Have more pics. None of top and doors yet. Email geno34bg@gmail.com. located in Custer, OH. NW Ohio”
UPDATE: **SOLD**
Steve’s selling his Parkette racing body and jewels roll bar. The Parkette body is rare, but the jewels stainless steel roll bar might be rarer.
1) **SOLD** Was $750 Vintage 1950 Jeep CJ 3A Best Jewels Stainless Steel roll cage. One of a kind, you’ll not find another one like this.
2) Was $600. **SOLD** Parkette Racing Body – In good shape. Bobcat Hood, Fenders & Uncut Grille. Great for racer, rat rad, crawler.
The body is fiberglass.
“1946 Willys Jeep Not running No Spark Jeep has been sitting Fiberglass body”
http://longisland.craigslist.org/cto/4696540400.html
UPDATE: **SOLD**
This former PNW jeep was still in good shape last March. Unfortunately, someone crashed this into a tree. Looks like there’s value in tires, rims and the Parkette body.
“Parting or Repair 1954 Willys jeep that had a 450hp small block Chev till it hit a tree. I bought it this way to make into a 2wd street rod but have 2 many projects now and want to sell it whole or part it out. what you see is what you get. have small block headers that go with it if it sells whole.”
=====================
What it looked like prior to being wrecked.
UPDATE: **SOLD** Was $5000.
Has a fiberglass body. Looks solid.
“Fiberglass body,2 1/2 inch lift, Buick 225-V6, headers, 3-spd T90 with Warn All Range Overdrive, Chevy steering conversion with tilt wheel, replaced clutch, Flowcooler pump, new fuel pump, new carb, new battery, replaced front wheel bearings, replaced front & rear brake shoes, wheel cylinders lines, and master cylinder, replaced tie rod ends, replaced front & rear u-joints, Con Ferr shackles, with Daystar greaseable shackle and spring bushings, new ignition switch, new wiper motors, new windshield glass, 33x12x15 B.F. Goodrich Mud Terrain tires on 15×10 chrome American racing rims, $5000.00 OBO, all parts have 6000 miles or less”
UPDATE: **Status Unknown** Was $2700.
There can’t be too many CJ-6 fiberglass bodies out there.
“Dauntless V-6 engine\T86 three speed trans\DANA18 transfer case\Dana 27 front diff| DANA 44 rear diff. Lift springs included. Fiberglass tub and fenders. Steel hood and grille. PO started to restore and gave up. Frame is excellent, as is the windshield frame. Engine\trans\case all installed. Has a roll bar and a lot of misc parts. Needs fuel tank, blinker handle and I’m sure some other misc parts. Has Florida Title. Has never seen snow. No tires or rims. I can load on your trailer for you, or I can deliver but we would have to talk about that. No trades”
UPDATE: **SOLD** Was $950.
It’s got a fiberglass body.
“willys jeep 1946 rough fiber glass body. orginal frame front end hood fenders original drive train.
used in Buffalo New york as a snow vehicle.needs battery, hoses and fuel pump.”
UPDATE: **SOLD** Was $9000.
This has a fiberglass body.
“1952 jeep cj3a Flat Fender Jeep…fiberglass body…F- head overhead valve engine…new carb,fuel pump,gas tank,water pump,hoses,belt and battery…radio and speakers…spare tire, never been on ground…new ignition wires….tires in very good shape…i will entertain best offers too.”
Not running. Has fiberglass body.
“1960CJ3B
Fiberglass tub
Metal hood and grill
New top
Roll bar
134 c.i.4 cylinder
3speed trany
Spare engine and trany
Transfer case radiator
Carb and head
I think it has a spun rod bearing. So not running”
It’s got a fiberglass body. Looks like solid vehicle for the price.
“L1955 M38A1
FIBER GLASS TUB
Front fenders, hood and windshield original steel
3.8 chevy v6 dual exhaust with headers and Edelbrock 500 cfm 4 barrel, runs great can drive it home or to hunting camp.
T90 TRANS original recently rebuild
DANA 18 TRANFER CASE W/ Warn Overdrive
DANA 25 FRONT AXLE new bearing and seals with low miles
DANA 44 10 SPLINE new bearing and seals with low miles
Axles, tranny and transfer case all original (all have tags that say rebuilt Japanese ordinance command 1955)
Saginaw power steering
Power Brakes
Hydraulic clutch
Painless wiring harness
Newer seats
Duel fuel tanks. Soft top
Good tires
Needs plate made for floor to cover tranny. You can see in pictures
otherwise good to go. come give it a test drive!!!!!”
UPDATE: **SOLD** Was $3000
Has fiberglass body.
have had Jeep for 10+ years. Used at hunting camps and for running local errands. Some of the work done include: new fiberglass tub & fenders, converted to 12 volt, complete new wiring, rebuilt transmission & transfer case, new front & rear drive shafts, rebuilt front & rear ends, rebuilt radiator, new gas tank. Non-operative items: no wipers, no horn, parking brake. Currently licensed – dec 2014.”
UPDATE: **SOLD** Was $2500.
This is a project with a fiberglass body.
“This jeep is a project that is about 1/2 finished. Plans have changed and it is no longer needed. Many new parts! Frame is cleaned and painted with Por-15. New steel fenders, fiberglass tub, also hav original tail gate. Has all original seat frames!”
UPDATE: **Status Unknown** Was $8500.
This CJ-3A has a stretched Parkette fiberglass body and a bobcat fiberglass hood.
“1949 Fiberglass flat fender Willy’s Jeep
Stretched 8″ for leg room
Bikini Top & Half Doors
4.3 Vortec with a 4L60E computerized
Automatic transmission
Spicer 20 with twin stick, Novak adapter
Dana 44’s with detroit lockers front and rear
5 new toyo 37×14.5×15 Siped Tires
Aluminum Radiator
Onboard Air
Power steering, power disc brakes
Full cage
High Life jack, CB, and Seat Heaters included”
UPDATE: Price dropped to $2500.
(002/09/2014) This has a fiberglass tub.
“1942 Ford GPW restomod project for sale. All power train and drive train has been rebuilt or replaced or upgraded. Runs and drives and stops. Rancho springs, conferr shackles, body lift, 31″ tires. Saginaw steering and upgraded front and rear crossmembers. Warn premium hubs. Original grille, hood, and dash. Original data plates with matching frame serial number. Fiberglass tub and fenders. New windshield and frame. New bestop tigertop. Fuel cell. Needs some minor electrical and body work and making sure everything is torqued. Engine is a rebuilt MB engine. New T90 trans. Rebuilt transfer case and axles. 11″ drum brakes. 12v conversion. New Optima red top. Reman carb, painless wiring harness. I’m not in a hurry to sell, i just don’t have time to work on it now and could use the space. I have too many projects and need to consolidate. No title, this is a military vehicle and has never been titled before. Bill of sale only. Interested in trades for running or not running complete yj or tj wranglers. 3000 obo. Willing to negotiate.”
Fiberglass bodies still available.
“fiberglass Jeep bodies are hand laid composite fiberglass and can be made to your specifications please call Ed at 3604813602”
UPDATE: **SOLD** Was $3000
“I bought this rig about 1-1/2 ago for the fiberglass body for another project. It did not have the motor or transmission at that time. It has a Ford 5.0 HO Roller Cam motor with GT-40 Heads and ford motorsport E303 Cam shaft, Edelbrock performer intake and edelbrock 625 cfm CARB and Street rod drop Headers. Has 120amp alt, small high torque starter. The transmission is a C-4 transmission has been gone thru by Transaction transmission in Forest Grove.
It is a 2 wheel drive, has front solid axle and updated steering “old school” has a Camaro 10 posi rear end. Has power vacuum assist brakes.
Previous owner said curb weight was 2140 LBS with conservative 275 Horsepower =7.78lb/hp
That translates into just plain FUN.
What it needs left to do, install electric fuel pump, transmission cooler, Aluminum radiator, I have all the parts new just sitting there and ready to go.
Exhaust needs done yet.
I’m willing to split the deal if someone wants fiberglass body or engine and transmission if the offer is right. I’m scared to think the amount of money I have in this my loss your gain.”
UPDATE: Price dropped to $3000.
(03/24/2014) This might have a fiberglass body. If not, someone has modified it slightly.
“Runs, drives, needs timed and brakes bled and ready to go. Has many parts in boxes waiting to be added, new body pieces, springs, hood, rims, tires, starter, battery, fuel tank, painless wiring harness, new electric distributor, carb and so on.
Have clean title. Has 134 F-head motor”
UPDATE: **SOLD** Was $6000.
(08/09/2013) I didn’t know there was racing in Hawaii.
“Its a 1953 Willy’s Jeep 4×4 fiberglass body with stainless grill.
Engine is a 350 Chevy, stock bore with eye browed pistons 10.5 to 1.00 compression.
Has a Lunati 520 lift cam, roller rockers, gear drive, Weiand dual carb tunnel ram with Holley 660 center squirters and Barry Grant upgrade kits, headers and MSD 6 distributor and ignition.
Has run 4.80s at KRP sand drags.
Drive train is a Chevy 4 speed Muncie, 538 gears Dana 60 with lockers, locking hubs, BorgWarner overdrive, steel axles,11in. lightened flywheel and Centerforce clutch.
There are two sets of tires and rims.31×15.50 Terra’s and 33.5×12.50 Pro comp wranglers w/ M/T rims. Frame is boxed for high torque traction.(Jeep is street legal with papers in storage.)
Single axle trailer with check plate ramps and tilt also included with sale.
Extra parts include:
Edelbrock single aluminum manifold and carb, 850 Holley complete
2 extra Holley carbs.(660 & 750)
4 speed Muncie with adapter.
T-90 w/ adapter.
Two transfer cases.
Stainless steel hood and fenders.
Willing to separate car and trailer.”
UPDATE: Was $400. Status Unknown. Pics now available of the very rare Parkette 3B shell and a Bobcat 3B hood.
(10/16/2013) I tried to get some pics of the 3B body, but didn’t have any luck. That sounds like the most interesting part.
“Rolling frame, running gear and roll cage included. No motor or transmission. Comes with Willies high hood full fiber glass wraparound body. $400”
UPDATE: Still Available
(10/08/2013) This looks solid. It has a fiberglass body with a few other updates.
“1946 CJ2A Willys Jeep in great shape. Turn key and runs and drives great. Has a fiberglass body with a fresh paint job and new wiring. Fuel inj 4.3 V6 with Advance adapters fender well headers and new mufflers and tip outs. T90 trans and dana 18 T/C are tight and in perfect shape. Original Dana 41 rear and Dana 25 front differentials. 11 inch brakes and all new clutch components. 33 inch TSL tires with plenty of tread. New electric fuel pump, gauges, windshield glass, seats, bikini top. Aftermarket front lock out hubs were rebuilt and in great shape. Headlights, tail lights, horn, blinkers and wipers all work great. This is not a half done project that you need to finish, this is a turn key and off you go flat fender jeep. Nicely done and not a hack job. Asking $7500 If interested please email with a phone # and I will get back to you.”
This appears restorable.
“I purchased a used body to change out a rusty one ..but now I sold the jeep and have no use for the replacement body. Exterior is prep’ed ready to scuff and paint, inside had bed liner in it and most has been removed..could put on a fresh coat and your ready to roll. Body in two pieces/ front half and back half.”