Has some dings and dents.
“19+53 Willys CJ3B Jeep, aluminum full top (top only, jeep not for sale) all windows good, doors complete. Should fit 1946 to 1971 Willys Jeep, not perfect but nice.”
Has some dings and dents.
“19+53 Willys CJ3B Jeep, aluminum full top (top only, jeep not for sale) all windows good, doors complete. Should fit 1946 to 1971 Willys Jeep, not perfect but nice.”
UPDATE: **Status Unknown**
The seller has three trucks and one CJ-2A for sale.
“I have several Willys pickups for sale and a nice project CJ2A. Also a nice 68 International 3/4 ton pickup, a 73 IHC 4 x 4 with only 72,000 miles and a 98 Dodge pickup I’ve had for a couple years, nice pickup, be a great ranch truck, hunting truck, etc.
Thinning the herd! 51 Willys Pickup, Ford Flathead, nice project, needs restoration but solid and complete. $2250
48 Willys CJ2A, nice project, complete with cab, $2250 obo.
Several other Willys pickups & parts:
An early 50’s complete pickup, missing the tailgate, has the 4 cylinder F head, very cool dual spotlights, etc. It’s a project but a worthy one.
Early 50’s Willys project, cab and chassis, on rubber, no box or back fenders, engine is complete and should run, no radiator, missing a few other parts but a good project or parts pickup. $750
Early 50’s Pickup cab, probably the nicest one you’ve ever seen, solid floors, good doors, good glass, far easier and cheaper to replace your battered and banged up old cab with this one for $500
Continue reading
UPDATE: **SOLD** Was $3500.
Chris spotted this Tux Park. Might be a good price.
“This is a very nice Jeep. It has all that is in pics. I removed the top, windshield, and doors. I drove it today. 4wd works great. Very little rust on front left fender and top.
really nice jeep. I love it. I just want something bigger like a chevy full-size 4×4. I had the transmission converted from column to floor.”
UPDATE: **SOLD** Was $425.
Paul identified this as the top made for the M-38, which W-O called the “Cab-Closure Hardtop“. Looks in great shape.
“I have a willys cab, windshield frame, and doors for sale. Fits cj2a willys jeeps. Need gone. Cash talks”
UPDATE: **SOLD** Was $2800.
Looks like it has a Reed-Porter hardtop.
“Complete and all original. Have title. Ran when I parked it, but haven’t ran it for several years. Body sound. No rust hole. Be great for restoration.”
UPDATE: **Status Unknown** Was $200.
This looks to be a Sears Deluxe Aluminum Full Top (#4 in the catalogue), based on the CJ-3B page.
“RARE ALUMINUM WILLYS HARDTOP
ONE DOOR MISSING GLASS
CAME OFF 46 2A”
UPDATE: **SOLD** Was $7800.
(09/24/2016) Not all original. Looks in good shape.
“I am selling my 1954 Jeep Willys cj3a High Hood Factory Flathead 4 all original been taken apart and rebuilt with all original parts will not find one like it runs and drives great no rust just a great driver very fun removable top brand new bikini top Woodrow Bar a bunch of new parts and old parts original rims and tires also have the new rims and tires all the electrical works great turn signals heater headlamps brake lights everything works excellent will not find one in this condition that still original asking 12 5 or best offer ”
Looks like this has a rare Boston top.
“Willys jeep, good condition, has a rebuilt ford 2.3 engine. ”
UPDATE: Still Available.
Unclear if it runs or not.
“We have a nice survivor CJ-2A Willy’s Jeep. The 4 cylinder has been replaced with a Buick V6 at some point it its life. The transmission is a stock T-90 3 speed. There is a Koenig PTO winch, tow bar and also a Koenig hard top with full doors. The body is in rather good shape for being as old as it is. Seats are not factory, Tires are good, great tread. This little Willy’s can be ready for hunting season if you hurry.”
Looks like the top needs glass.
“Hard top and doors for jeep cj2a, cj2b, cj3a, cj3b (doors need to be modified to fit the cj3b). Roll up windows. Needs some work but not too bad.”
The seller said that this has coil springs between the leaf springs and frame. There is some bondo and rust. The tub is resting on some lumber that’s wedged between the frame and tub. It has sat since the 1980s. The engine might be a GPW/MB. It runs and shifts ok, but needs new brakes, master and tires at the very least.
“Original Jeep Willys CJ2A with all original parts. 6 volt system, all glass is good. Motor was replaced in 1974 and was military surplus remanufactured engine. Less then 5000 miles on the engine. Last plated in 1987. Been garage stored with plans to restore until just last week. Great candidate for restoration. Drove from storage to current location. Starts right up. Needs brakes, tires, gas tank repaired and a battery. Will need to be trailered to new home. ”
UPDATE: Still Available.
Looks to be a Meyer Cab without the auxiliary side windows (see brochure at bottom)
“1975 Jeep CJ6 metal hardtop complete with doors and lift gate, good condition”
UPDATE: **SOLD** Was $5000.
“1948 CJ 2A Willy’s Jeep
Runs but needs work
original willys engine
top made to fit not original”
UPDATE: **SOLD** Was $850.
This rare top looks in good shape.
“Jeep CJ5 (not CJ7), fiberglass hardtop by Acme. Fits 1976 and newer but will work with earlier CJ5 or M38A1 using a 1976 or newer windshield frame, ( I have some of these for sale). Very nice condition. Paintable to any color. $850. ”
It’s the hardtop only for sale. Needs some paint, but may be a solid hardtop.
“Got this hardtop for sale. Despite the looks it’s in pretty good shape. Call or text for details. If i cant sell it im going to scrape it. ”
I can’t tell if there’s a dent on the top’s upper passenger side or if that’s just dirt.
“ALUMINUM HARD TOP FOR FLAT FENDER JEEPS (CJ2A). TOP IS INSULATED AND IN GOOD SHAPE IT COMES WITH DOORS AND WINDSHIELD. GET YOUR HUNTING RIG READY FOR INCLIMATE WEATHER . (WINDSHIELD HAS A CRACK IN IT)”
UPDATE: **SOLD** Was $4000.
Has some updates.
“1948 Willys. Motor is Ford 200 6 cyl. Factory 3 speed trans and transfer case.
engine has been rebuild with rv cam. would be great project for restoration.
asking $4000/ negotiable or trade. no lo-ballers please.”
UPDATE: **SOLD** Was $300.
The shape of the top is Porter & Reed-like, but I’ve not seen one with those large windows. I wonder if they were added later?
“Aluminum Hard top for a willys cj2a with roll up window doors. ”
UPDATE: **SOLD** Was $1111.
Looks like a good price. Nice Meyer top. Doesn’t run, but looks complete.
“body in decent condition
does not run
clean CO title”
UPDATE: **SOLD** Was $1800.
“56 CJ-5 Cool condition. 4cyl engine, extra engine, factory hardtop, Moab family history, some rust, not too bad, needs a little work to get running (radiator repaired, motor mounts, starter, carb cleaned, ect) Hurricane motors. Come and get it! Clear title”
This looks pretty stock. May be worth a closer look. Has a Meyer hardtop.
“’62 Willys jeep ready to roll. hunting, off roading, fully operational including wench. owner does not have time for me anymore. I love to run!”
It’s needs some work, but this top can be shortened into a top for a CJ-5.
“Factory Jeep hardtop for a ’65 CJ6. This top is complete but has rust on the bottom of the sides. Only surface rust present except for the left & right side which are corroded as shown.
Very unique top as is fits both a CJ5 and a CJ6 – the center section removes for CJ5.
All windows intact, doors, and liftgate all complete and all hardware, hinges, etc are included.
Looks to be quite restorable with some repair to the sides, the PO had welded the top to the Jeep body.
No dents or damage other than the rusted areas as shown.”
It runs, but need some work.
“For sale is a 1948 Willys Jeep. It has a Dauntless V6 engine in it and it runs. It includes hard top, doors, back hatch and many extras. It was a project, and needs some additional work, but as mentioned it is currently a running Jeep.”
I’m pretty sure this has been listed before, but I can’t seem to find it now.
“Super nice willys jeep. Late model Buick 231 v-6 automatic. 4 wheel disc brakes. Power steering winch hardtop. Nice jeep. Cool ride. Asking $8500”