To Top

Jason’s Dually Truck Project

• CATEGORIES: Builds, Features, Willys Trucks This site contains affiliate links for which I may be compensated.

Jason Potts, out of Burnettsville, Indiana, shared a couple photos of his Willys Dually project, so I asked him where he found his adapters and how he got into jeeps.

14241468_10100479635074969_9222073552002417203_o

Of the truck adapters he wrote, “The adapters came from Hank himself. With the original bed rusting out on me, I bought the flatbed knowing someday the original would go bad. I had a local welder cut the length of the bed down 22 inches. The black locust was cut out of my family’s woods and milled at a relatives mill. I live in an apartment and the truck is currently stored in an enclosed metal barn and will see a garage again in the spring to continue work. The motor is a 232 out of a 70’s CJ and is being rebuilt.”

15196027_10100531861048699_2781110104452442629_o

Then he shared his jeep history. “Originally my dad bought a 63 Cj5 at an implement auction and we used it to get around on county roads for fishing, hunting, and for other adventures. I was in my early teens at the time. In the early spring of 2004 (Junior in high school) a culvert washed out down the road from our house forcing myself and my dad to find alternate ways to work and school. His route took him past a place that had the 54 Willys and knowing I wanted a truck he told me about it. I bought the truck for $1500 and had to buy an electrical kit for it as its wires were all the same color and no lights worked. After about 2 months it became road legal and I started driving it to school.

Senior year of high school I was still driving it. Ever since owning it, the truck always smoked and was burning through oil at such a fast rate I eventually had to put the hottest burning spark plugs and plug extensions on just to keep up, in the end I resorted to using used tractor oil. The truck got 27 miles to the quart of oil. For a long distance football game I burned through 9 quarts of oil and $27 in gas.

Through the years since I have owned/or still own a 92 Jeep Cherokee, 66 Cj5, 75 Cj5, and a 95 Wrangler. Not to be outdone my older and little brothers also bought Jeeps. Older brother bought an 88 Wrangler and little brother has bought 2 Cherokee Country’s (both were previously rolled and used as trail rigs), a 47 Cj2A and a 65 CJ5.”

995041_819334365909_1526413902_n

 

5 Comments on “Jason’s Dually Truck Project

  1. Jason Potts

    This thing has a Timken rear axle on it, how would I go about changing out the axles? If I went to a Dana 44 or 53, they’d have to come off another Willys truck correct?

Leave a Reply

Your email address will not be published. Required fields are marked *

Subscribe without commenting