No description provided, other than a note that it is in ‘poor condition’.
CJ-3A Research Archives
1950 CJ-3A JeepRod Yuma, AZ **SOLD**
UPDATE: **SOLD** Was $7900.
Needs work of some kind.
“rat rod jeep…1950 willys…clean title…built 350 sbc…new 350 trans…air ride suspension…aluminum radiator…much more…runs and drives but needs some work…if interested call and will discuss.”
1949? CJ-3A? Sonoma, CA $11,000
UPDATE: Price dropped to $11,000.
(12/09/2019) Has a 2A body.
https://sfbay.craigslist.org/nby/cto/d/el-verano-willys/7131032249.html
“1949 willy;s jeep – all original except for the paint -perfect for hunting, camping, or cruising. Has a flat head 4 cyl runs excellent, 3 spd manual, drum brakes. asking 15,000 or make me a reasonable offer.”
1949 CJ-3A West Jordan, UT $10,000
Looks like a good build.
https://classifieds.ksl.com/listing/59227120
“This has a new body, fenders, hood and windshield frame. 231 Buick V6 with stock running gear, T-90 with over drive. Front axel has been converted to disc brakes. 4” lift with reverse shackles. Corbeau bucket seats with rear seat. Removable roll bar and windshield folds down so it can roll into toy hauler. In total just over 30k invested and less than 1000 miles and nothing crazy. It really is a must see. Call to schedule to come have a look.”
1950 CJ-3A Stevensville, MT $2500
Runs, but needs work of some kind.
https://missoula.craigslist.org/cto/d/stevensville-1950-willys-jeep/7130672306.html
“1950 willys jeep
All fiberglass body
4 cylinder hurricane engine
Runs good
Needs some TLC
Clean title!”
1951 CJ-3A Albuquerque, NM $10,000
Has some mods. The steps have been altered.
https://albuquerque.craigslist.org/cto/d/albuquerque-1951-willys-jeep/7125302930.html
“1951 Willys Jeep
Exelent running condition
Rebuilt transmission
New carburetor
New tires
Complete brake job & master cylinder
New exhaust pipe and manifold”
1942 Flattie Buena Park, CA $16,000
UPDATE: Still Available.
(01/27/2020) I think I’ve listed this before, but can’t find it.
https://www.facebook.com/marketplace/item/848747005595447/
“1942 Jeep Willies. -turbo 350 trans 350 crate motor 330 horse 9 inch high pinion Dana 300 2.0fox shocks coil over New altimeter gauges new paint and powder coated roll bar new tires much more”
1952 CJ-3A Ramona, CA $3500
It’s a project.
https://sandiego.craigslist.org/nsd/pts/d/ramona-52-willys-jeep-project/7129029656.html
“All there except carb(I’d get a Weber) and rear driveshaft. Ford ts 1.6. (Pinto engine super nice in these!!)The clutch and adapter kit are all new. Tires good. Yes its got a 2a window but it’s a 3a. Clear nonop title in my name.
Long story short got it from a guy who the city hassled because it was a project in front of his house a number of years ago.
Now I realize I won’t get to it so it’s your chance!!”
1967 CJ-6 El Cajon, CA $4250
UPDATE: Price has dropped to $4250.
https://sandiego.craigslist.org/esd/pts/d/el-cajon-1967-jeep-cj6-for-parts/7128437856.html
“1967 Jeep CJ6 w/ running original drive train – 225 V6 motor, T90 trans., Dana 18 tc, good clutch and brakes, rare drivers bench seat, steel half top and doors. Clear title no VIN plate – $4,500”
1953 CJ-3A Pepperell, CT **SOLD**
UPDATE: **SOLD** Was $2500.
(04/17/20200 Parts or project.
“Solid 1953 Willys CJ3A Project Go Devil L-134 Motor Titled In Connecticut Many new parts Complete Drivtrain Needs wiring and gauges Had different windshield I switched it out”
1952 CJ-3A San Diego, CA $3500
Thanks to Mike for spotting this project.
https://sandiego.craigslist.org/nsd/pts/d/ramona-52-willys-jeep-project/7124956177.html
“All there except carb(I’d get a Weber) and rear driveshaft. Ford ts 1.6. (Pinto engine super nice in these!!)The clutch and adapter kit are all new. Tires good. Yes its got a 2a window but it’s a 3a. Clear nonop title in my name.
Long story short got it from a guy who the city hassled because it was a project in front of his house a number of years ago.
Now I realize I won’t get to it so it’s your chance!!”
1951 CJ-3A? Kingman, AZ $23,000
Lots of updates.
https://www.facebook.com/marketplace/item/522937995079218/
“Too many extras to list it has a 67 Ford Mustang motor in ARB air lockers in the front rear Dana 44’s in the front and rear front end out of a three-quarter ton Chevy been narrowed down435 new process transmissions Centerforce clutch spring over brand new leaf springs Rancho power steering It has a warn overdrive way too many things to name everything”
1950 CJ-3A Austin, TX **SOLD**
UPDATE: **SOLD** Was $4000.
(11/04/2019) Appears in good shape.
“Totally rebuilt 1950 Willys Jeep CJ5 for sale.
Dauntless 225 motor. Rebuilt front to back to front.”
Year? CJ-3A Sisseton, SD $1500
Has a rear PTO. Could have some value.
https://fargo.craigslist.org/cto/d/sisseton-jeep-willys/7125328694.html
“Complete Willys Jeep (tractor?)
Has PTO out the back.
Project vehicle I ran out of time on.
Believe it is late 40’s?”
1950 CJ-3A Blue Springs, AR $1000
Not sure how much value is here, as the front frame rails have been repaired.
https://fayar.craigslist.org/pts/d/springdale-1950-cj3a-willis/7125346090.html
“CJ3A Willis Jeep frame, wheels, and misc parts. Selling as a full lot, not wanting to sell parts individually. Please call Vic with questions. Thanks!”
1949 CJ-3A Idaho Falls, ID **SOLD**
UPDATE: **SOLD** Was $3000.
Seems worth a look. Has drivetrain updates.
“1949 Willys Jeep CJ3A. Has the “Dauntless” V6. Turbo 400 automatic transmission. Dana 18 transfer case. Saginaw steering. Front disc brakes. Lots of new parts. $3,000 with new tires and older rims. $2,500 with older original style wheels and tires. Runs well and drives but definitely needs more restoration but that’s part of the fun with these old Willys jeeps. Make offer or if you have something of equal value maybe we can trade.
This Jeep was never titled but the price reflects that. I did a title search in Oregon where it was purchased and came up with nothing. There are ways to license and register it and it really isn’t a big deal but just know there is that issue. Added: The Transmission shifts rough and leaks and may need a rebuild.. Probably needs a new radiator. I took the gas tank off and did a coating on the inside which came out very nice. Put in a new gas tank gauge sending unit. New distributor cap and points. New coolant hoses. Runs well but I have a carburator rebuild kit for it. Changed the oil. Changed the tranny fluid. Did a flush of the coolant system.”
1949 CJ-3A Rogers City, MI For Trade
No obvious rust.
https://nmi.craigslist.org/bar/d/rogers-city-49-willys-jeep/7122868352.html
“rLooking for a Yamaha rhino. I have a 1949 willys to trade. Buick v6 . Different frame and drive components”
1950 CJ-3A Stoughton, MA $1600
UPDATE: Still AVailable.
(10/03/2019) Includes a plow. Has some wood sides that I imagine are covering a rough body.
https://boston.craigslist.org/gbs/pts/d/stoughton-jeep-willys/7121521840.html
“1950 Jeep CJ3A – have plow also.
Was my project but moving soon.
Wood on sides (see pictures).
Not started in some time.
Complete. Unmodified original.”
Year? CJ-3A Helena, MT **SOLD**
UPDATE: **SOLD** Was $3500.
It’s listed as a 1947 CJ-2A, but it looks to be a 3A.This half top is a curious one. It looks like it’s been built out of galvanized metal? If so I suspect it’s a home made one, perhaps modeled after a Porter & Reed top?
“Pulled this out of a Quonset a couple months ago, it’s a cool little Willys Jeep but I already have a CJ2A and this is one project too many.
Hasn’t run for about 4 years, I asked the guy how long he’d had it he said, “I put those 1973 plates on it. ”
We have not tried to start it, the oil looks good and it has antifreeze in it, the gas line is disconnected at the fuel pump, they had a little can on it last time it ran. The engine has pretty good looking red paint so I asked him about that. He said they had it rebuild a “Long time ago.”
1958? Flatfender Body Mesa, AZ $300
It doesn’t look to be a 1958 body based on the grille and the took box; looks more like a 2A or 3A body.
https://phoenix.craigslist.org/evl/pts/d/mesa-willys-jeep-body/7120475660.html
“1958 Willys jeep body. Hood,fenders,grill, and tub.”
1953 CJ-3A Fresno, CA $8500
Has a replacement body along with a variety of mods.
https://fresno.craigslist.org/cto/d/fresno-1953-willys/7121242169.html
“1953 Willys. Willys is in excellent running condition. Ready for trails or just a little run around. 327 with mild cam runs nice and smooth. Not radical. Automatic 400 transmission. Power steering. Power brakes. Warn overdrive transfer in original transfer case. Factory undercarriage. All lights work and are led. All new wiring. New tires and wheels. Frame rails in excellent condition.”
1950 CJ-3A Florissant, CO **SOLD**
UPDATE: Still Available.
(03/14/2020) Has a variety of updates.
“1950 Willys CJ3A / V-6 Conversion $5500.00
• 1995 Chevrolet Vortec 4.3L V6 CPI complete computer and OBD-II port
(VIN 1GNDT13W3S2140797)
• Hood scoop / air intake
• Advance Adapters engine to transmission adapter kit
• Rebuilt T90 3-speed transmission and transfer case
• Warn Overdrive
• FlowTech headers with Thrush mufflers
• All suspension and wheel bearings replaced
Year? CJ-3A Sterling, CO $2000
UPDATE: Still Available.
(04/18/2020) The rear’s been chopped a bit.
https://www.facebook.com/marketplace/item/508573973403973/
“For sale In Sterling Colo 2.000.00 obo Cj3a roller pm me with any questions.Trades considered.”
1950 CJ-3A Columbus, OH $4500
UPDATE: Price dropped to $4500.
(04/02/2020) The body has been repaired.
https://www.facebook.com/marketplace/item/2524231071015827/
“1950 Jeep willies 4×4 Everything works Decent tires new battery new exhaust It’s a little rusty but it’s a collector’s item I will continue to drive it till I sell it Jeep runs and drives asking 5000 or best offer or what do you have to trade forward looking for a dually diesel truck if it’s ford 7.3 if is a Chevy duramax Or what do you have only thing I can say is no”
1950 CJ-3A Green Bay, WI No Price
Project CJ-3A appearing to have some parts value.
https://www.facebook.com/marketplace/item/623841918162687/
“, I’ve attached some pictures of the 1950 CJ3A that I have to part with and am looking to find a home for. I’m really open to offers. Not in the pictures, is included the title for it and I have two mostly complete engines, one L head and one F-head that is for the post ’53 production models. The jeep is mostly there except it does not have any seat frames”