Possibly a fiberglass body? Note how the roll bar’s loop is bent so it can mount to the frame.
“1949 Willys Jeep For sale. Runs, in good condition. 4000 or best offer, call for more information.”
Possibly a fiberglass body? Note how the roll bar’s loop is bent so it can mount to the frame.
“1949 Willys Jeep For sale. Runs, in good condition. 4000 or best offer, call for more information.”
UPDATE: **SOLD** Was $2800
Looks like it needs some work, but it runs.
“Runs and drives. Original flathead. This thing will climb over itself! Fun toy for hunting or just climbing walls.”
UPDATE: **SOLD** Was $1200.
Runs, needs work. windshield looks military to me.
“1946 Willy’s jeep.. been patched up and the brakes don’t work… only. A drivers seat right now… this will start up and run and drive .. comes with reman master cylinder and the rest of the brake overhaul stuff..no title”
UPDATE: **SOLD** Was $350.
May be some value here.
“’48 Jeep CJ-2A, rolling chassis, no title, no motor, no trans. Just frame, springs, axles & body tub…come get it,”
UPDATE: **SOLD** Was $15,000
“I’ve decided to cell my jeep after 25 years of taking care of it.
It works perfectly, all three serial numbers match and tags are there #11809.
Body and tail gate #1821.
Body and frame have never been butchered or modified.
It has four original Monroe take apart shocks, rear seat, top bows, coil bracket
(No coil too bad) generator is original 6volt, with rubber brush cover, and I used a
Ford 12v regulator with the right bolt pattern to charge the battery. The rear end
Has a modified model 27 power lock with custom 300m axle shafts.
Comes with mis spares.”
UPDATE: **SOLD** Was $1500
This project is a mix of parts.
“1943 Willy’s Jeep CJ2A. The original body has been replaced with a fiberglass body. Comes with extra engine and transfer case. The motor ran a few years back, but has been parked in the shop since. Asking $2000 obo.”
Unclear how much value is here.
“This is a classic Willy military jeep . It needs some tlc really needs a bath lol just dont have the time to invest in it to work on it . My uncle passed away recently and he gave this jeep to me thier is alot of memory s in it we used it as a hunting club jeep . So I hope it goes to soneone who will have as much fun as we had out of it . It does not have current title so Offroad or huntingclub use only. Unless u can reapply for one . The last time its was cranked was 3 1/2 years ago . And it ran like a top but now it most def needs plugs and wires . New battery and little carb work and fresh oil and gas and the basic. And it should be back to its glory days . It has potential and I think it being a jeep milatary vehicle is just plan cool. But if ur interested call or txt greg at 1205 -800-0563 im willing to work on price or possible trade in a foxbody or older mustang in fair condition not worried about the body mybe little older”
UPDATE: **SOLD** Was $1950.
(03/28/2014) The hardtop was made from an aluminum boat.
“1947 Jeep CJ2A with aluminum hard top and doors. Unique as they were made from an aluminum boat and look great!
I have not had time to restore but jeep ran into the garage and has been inside heated storage since. Needs brakes but what a cool piece to start with and re-do.
Clear title and spring is coming to get this one back on the road.
Stored in Newtown and please drop me note and we can arrange a visit. Thx!”
UPDATE: **Sold** Was $1200 & $700.
(08/4/2013) Seller has two jeeps for sale.
“1949 willys cj3a jeep…runs, drives, stops…has steel half cab, working pump + lift for plow (no plow)…frame ok, body rough”
UPDATE: **SOLD** Was $3000.
Looks like this has a Willys Overland hard top and the body is lengthened.
“46 Willys body cj-2a
24,301 original miles
flat head 4
Ran when it was parked 25 years ago.
no title but is out of the dmv system.
all parts are there”
UPDATE: Was listed at $3000. **SOLD** Serial number 10456
This might be an interesting find.
“Very Rare first year production 1945 Willys CJ2A 3 speed column shift, floating rear axels, belt gearbox, flathead 4 cylinder still 6 volt system with snowplow. Runs good and everything works.”
UPDATE: **SOLD** Was $4200.
The engine (f-head) looks nicely installed.
“1947 Willys Jeep Model CJ2A. 134 Cu In “F” Head Engine. Runs & drives well.
Includes:
Tow Bar, Roll Bar, Driving Lights, Seat Belts, Superwinch Lockout Hubs, &
MB Hood.
New:
Radiator
Fuel Tank, Sender, Gauge
Master Cylinder
Front Wheel Cylinders
Rear Shocks
Steering Bellcrank Kit
12 Volt Conversion with Alternator, Fuse Block, Wiring & related components
Horn & Relay
Holley Carburetor
Vinyl Top by Bestop
Clear Title & Current Registration.”
Listed as a 1947, this is a VEC 1946 with three data plates and square windshield bold holder bolts. I will be dropping by Scotts Valley in a week or a half or so.
“Call if interested (831)332-4947 NO TEXTS or Emails!!! Call please”
UPDATE: **SOLD** Was $4200
This appears to have a mix of MB/CJ-2A parts.
“For Sale a 1941 CJ2A Willys Jeep, Original motor and trans booth have been rebuilt. Brand new tires have not even been on the road since putting them on. Great looking Jeep do not have the time to enjoy it anymore. ”
It needs work.
“Great restoration opportunity 1946 CJ-2 Jeep runs but motor needs much worth. Brakes have been completely rebuilt including over 1400 dollars in parts. Clear title could be made street legal. Please only serious inquiries only no trades.”
UPDATE: Price dropped to $2500.
(04/01/2014) The body has been modified in a few spots. It might make a good run-about as is.
“1946 Willys Jeep CJ-2A in good condition, runs and drives well. please email for more information.”
No pics provided.
“1946 Flat Fender CJ-2 Jeep. Asking $2250 or best reasonable offer.”
http://newlondon.craigslist.org/cto/4409236128.html
UPDATE: Still Available
(03/31/2014) Nice rear PTO on the back.
“My Dad bought this Jeep in Colorado in 1947. It has been totally restored to near original condition. Original 4 cyl. flathead engine has been overhauled. Approx 45,000 original miles. Body has been totally (removed from frame) restored and painted. No Rust! No Bondo! Factory installed governor. PTO with belt pulley attachment. Bed and floorboards have been coated with “Rhino-liner” type rubber coating. Frame and underbody have been coated with rust inhibiting paint. Seats reupholstered, no top. Original title and owners manual in hand.”
UPDATE: **SOLD** Was $11,000.
Good looking build. Has replacement body.
“Must see in person to truly appreciate ( i know everyone says that but i serious), color is not as overwhelming, and truck really is sweet.
Up for sale a 1947 CJ2a show or go Jeep, this jeep has been in many local shows and has taken home loads of hardware for being so unique and in such great condition. Restoration completed about 3 years ago with only 500 miles since restoration. 95% of this jeep is new, from the engine and transmission to the rear axle spindles and bearings and gears of the rear end with all receipts to prove it, even minor components such as cowl weatherstripping and fuel tank neck grommets have been replaced…..outside of the dana 18 transfer case and front axle, and front drive shaft, pretty much everything else has been replaced with new upgraded components!!!
Looks in good shape.
“completely restored. good condition. make me an offer.”
UPDATE: **SOLD** Was $650.
Listed as a 1946-7 CJ-2A, it looks more like a CJ-3A. Runs and drives. the side goes up to the fender oddly.
“4 cyl 4wd standard runs and drives good project or yard truck thanks”
UPDATE: **SOLD** Was Make Offer.
This may have GPW/MB running gear.
“1940’s Jeep Willy and Army jeep for sale make offer”
UPDATE: Still Available.
(03/29/2014) Sitting for a while. No title.
“1947 WILLYS CJ2A $3500 or Trade
4 cylinder flat head motor
4×4
PTO
The last time the motor ran was 6 years ago. The head, Starter (new), Water Pump, Radiator, is removed. I was going to restore it and just don’t have the time and place.
Comes with a Bill Of Sale. Thanks”
UPDATE: **SOLD** Was $8500.
Not a column shift at the moment, but seller has the parts to turn it back.
“Early 1946 cj2a Willy’s in very good shape has had a partial restoration a few years ago. Some of the work includes painted, seat covers, new top, new transmission to make it a 3 speed on the floor but have all part to return it back to 3 on the collom, also new gas tank, brakes and wheel cylinders. Original go devil engine in great working order.”
UPDATE: **SOLD** Was $2950.
This might be worth a look.
“For Sale: 1946 Jeep Willys CJ2A on a CJ5 frame? Also comes with Dana axles and 225 V6 Buick engine. This is a very neat looking beast that could be loads of fun as well as a real eye catcher. I purchased this as a project to upgrade with my son, but find myself with too much else going on. This is drive ready and most everything works, but it is clearly not a highway vehicle. It also comes with a full soft top (not pictured). Email or call me if you have questions or want to come look at it. Serious inquiries only. The price is firm.”