UPDATE: **SOLD** Was $3500

It runs and drives.

“For SALE OR TRADE 1946 Willys Jeep cj-2a (CLEAN TITLE IN HAND) the price of $3500 is negotiable, as far as trades I will trade for a Kawasaki KLR 650 or similar endure type bike.

Has been converted to 12 volt. Engine has been replaced with the 134 F head. This is the engine that was used in the cj-3b’s among other vehicles, similar to the original flathead but the intake valves are in the head and the exhaust valves are in the block, providing slightly more power and reliability in comparison to the L head (flathead). This thing runs great, and has recently had these parts changed. (I have all of the receipts)

>starter
>fuel tank
>Distributor Rebuilt Kit (points, rotor, cap, condensor)
>fuel filter
>oil filter
>Ignition coil
>Spark plugs and wires
>The carb was just rebuilt by Thrasher Carb shop in Tulsa

all parts were purchased from kaiserwillys

This isn’t a show quality rig by any means, but this thing starts up right away, and idles and runs perfectly, the 4wd and transmission work perfectly also. Even the gauges work. Doesn’t leak all over the place, and would make a perfect hunting rig / work horse, or you could just use it for fun, this thing is a blast to drive”

UPDATE:  **SOLD** Was $5000.

(06/17/2012) This appears to still need work, though the seller doesn’t mention what needs to be done.

“Rebuilt 1946 CJ2A. New body work, fresh paint. Lift kit about 4 inches. Brand new 33×10.50 bfg mud terrain km2s. Brand new black d window wheels. New seats, gauges, tail lights, head lights. Recent rebuilt motor. All new electrical. Grant steering wheel. Custom pro comp bumper. Gotta get rid of it. No garage or shop to keep it in.”

UPDATE: **SOLD** Was $900

This may have a set of early hubs.

“For sale 1946 willys Jeep. Ran when parked several years ago. Was told it has a 1949 engine. Pretty solid body with some rust in the floor. Decent shape for it’s age. No title and not running. $900 OBO Possible trade for Rat Rod project, 57 chevy stuff or good 220 volt mig welder.”

UPDATE: **SOLD** Was $2750

(10/17/2010) This has seen some mods.  It needs some work.

“This is a 1947 willys cj2a jeep. This jeep runs good and is ready to roll!!! Has Clean title!!! and is ready for plates if you so desire.
This thing is loaded with mods!!!
Some of the mods this jeep has are,

Buick v6 225 oddfire
Dual exhaust
I believe Dana 44 and 25 axles.?
Go Rhino front axle guard
Dana transfer case
Gm 4 speed tranny
Hurst 4 speed shifter
285/75/r16 16inch BFG Baja Champion tires
2inch body lift
Unknown Rancho suspension lift(I’m thinking 2 or 4 inch)
4 rancho rs6000 shocks
2 qualitex seats
Seatbelts
Front and Rear round push bumpers
Lights and toggle switch Blinkers
New wiring
Power Steering
Roll Bar
Fiberglass front fenders and hood
Hanging pedals mod
Doors and cover kit(has not been installed)
All gauges work except speedometer(See Below)

Now for the Cons
Crack in windshield
Crack below winshield in dash
Wipers don’t work
Speedometer doesn’t work(has no speedo cable installed).”

UPDATE:  Price dropped to $5500.

(06/06/2012) Lots of mods to this flat tie.

“Fiberglass body
Powered by a 283
Twin stick transfer case
12 gallon fuel cell
Detroit locker rear
7500 obo
Call Rick at 209-380-3696”

http://modesto.craigslist.org/cto/3227997083.html

No pics provided and no description.

“call for info 1500 obo 3042673032 phillip”

http://martinsburg.craigslist.org/cto/3229025411.html

UPDATE: **SOLD** Was $2800.

(11/08/2011) “1948 Willys CJ2A – Original flathead engine, rebuilt 4cyl, new clutch, orignal rebuilt 3sp tranny, new radiator, new gas tank, new water and fuel pump, disc brakes on front, dual resevoir master cylinder, tilt steering, chevy steering box, full cage, body in good condition, needs tires am/fm cd player.
Starts everytime! Very dependable, great hunting machine! Asking $3800.00 but willing to negotiate some. Also consider trade for a decent camp trailer. ”

This runs and drives.

“Well, I’ve changed direction again and need to sell the 2a. I thought about using it for parts, selling what I could and scrapping the rest. But, after I got her started, and looking her over, I realized that this ’46 was pretty original and unmolested. She’s too good to part out, and would make a good restoration project if one wanted to start cheap. Has clean title, matching frame and vin numbers. Hood straight, fenders good, grill good, surface rust on frame, but sound. In the pictures, you’ll see some 24 volt parts that come with it. Youtube video of motor running and jeep moving are at

http://www.youtube.com/user/nedmcclung I think. I just want what I’ve got in her, so it’s yours for $1000 cash. Located in Atlantic Beach, NC. My phone is 252-three, four, nine-twothreefoureight for questions.”

http://raleigh.craigslist.org/cto/3226907317.html

UPDATE: Was $2000. **SOLD**

It runs and drives, but looks rough.

“1947 Willys Jeep CJ2A. Runs and drives. Has brakes. Bottom of tub and frame is rusty has been in WI its whole life. Floor boards and back pan were replaced. Rest is solid. All original drive train. 6V. Rewired with turn signals. Put on a 6v alternator, new glass, new shocks, ignition and plugs and fuel pump. Don’t have original seat frames. Have extra parts to go with it. Good hunting/farm truck or restore. Clean WI title ready to licence. Will take trades on things that go bang, ski doo rev, tundra or utility sled of compareble value”

UPDATE:  This appears to have been sold. Was priced at $2200.

“I have a 1946 willys army jeep its an all steel body in excellent condition for its age would be the perfect mud truck or rock crawler, for the most part its all there and just needs to be put together a great winter project. I have a propane powered 4.3l Chevy vortech motor with all the advance adapters parts needed to mount a willys transmission, also I have headers an edlebrock intake and a pulling cam incase you want to put a carb on the motor. I have a willys trans and transfer case out of a newer willys wagon. It has jeep yj springs and is sprung over scout Dana 44 axles with 4.10 and warn manual locking hubs. The right side knuckle is machined down for cross over steering and cost several hundred alone. Has pedals and power brake booster from a yj and a gm power steering box. It has 35 inch tires in the pics just to give you an idea how tall it is I also have another set of tires and wheels you can have. I have a very rare willys jeep pickup cap and doors that also go with the jeep, I also have two brand new best top seats the windshield and all the lights gauges and covers. If you have any questions please let me know I have way to many projects and have to let some go. I have a lot invested into this thing and I’m a little flexable on the price but please no low ballers. I know there is more I’m missing but whatever I have is all yours. I will consider trades for a bobber, a chopper, or a vw golf mk4 I dont mind doing work on them or cash up/down. Thank you for looking.”