UPDATE: **SOLD** Was $750.

There may be some value here.

“This jeep proudly and unselfishly gave it’s heart to keep a nice old army jeep alive a little longer. Now I have the complete body and frame with a rear bed full of spare parts. The tires are brand new with just a couple of miles on them to drive it here for surgery. There is a f-head 134 four cylinder engine that goes with this project. I have the radiator, an extra hood, basically every thing to complete it. I do not have a title for it, so bill of sale – parts only- kind of thing. I am told it has the ID number still plated on the frame. There is a roll bar, diamond plate corners, diamond plate “running boards” that reinforce the fender and lower tub. Windshield needs glass. Seats are faded, but useable for awhile longer. I may have extra axles, etc . also. Calls only please. I am still getting spam from the last time I replied to an ad with my email address.”

UPDATE:  Still available

(04/15/2010) There’s been some body work done on that.

“1948 willys jeep runs perfect on new engine(original 4 cylinder) needs a brake master cylinder but everything else is in running condition 832-646-0408″

http://houston.craigslist.org/cto/1951803449.html

It’s solid enough to go down a hill. Can’t tell much more from the pic.

“1946 Willys CJ2A. Engine was rebuilt. Runs great. Flat 4 “go devil” engine. Partially restored. This would make a great project. Selling cause I don’t have the room for it anymore. Feel free to email me with any questions or if you would like to see more pictures. Thanks.”

http://jerseyshore.craigslist.org/cto/1950133145.html

UPDATE: **SOLD** Was $4000

(07/22/2010) There’s a bit of a hole in the hood, but otherwise looks pretty good.

“1946 Willy’s CJ2A $5,000.00. **F-head 4 cylinder motor (not the original flat head) **Solid Rhino Lined floors, **1″ body lift, **New 29″ military tires, **New gas tank. This Jeep runs well and can be driven as is. It needs some work to be completely reliable or can be restored. The frame is solid and the floors are new. The body is usable, but showing its age. Some of the wiring is new, the starter is rebuilt, as well as the head. It has a new carburetor, new spark plugs, coil, cap, rotor, and a new battery.”

UPDATE: **SOLD** Was $2700

(07/16/2009) Given the body is new there is some real value here.

“1948 Willys Flat Fender CJ2A. Small block Chevy V-8 with Edelbrock manifold, Holley 4bbl and HEI. SM465 4 speed, AA adapter, Dana 18 T-case, Saginaw power steering, On plated and reinforced original frame and axles with a spring over. Brand new body tub, front fenders, tailgate. The new body kit was $3,000.00 alone. Willys scripted hood.  Good used Windshield.  Includes collector lisc plate and a couple boxes of spare parts including some military black-out lights and some extra beige paint. Supposedly most of the frame work was done by TC’s off road in Kent a few years back. Not my project, bought it for the new body, but decided to go 3B High Hood instead.”

This looks like a good price.

“THE JEEP IS A 1947 WILLY BUICK V6 HAS 2 SETS OF TIRES AND WHEELS 1000.00. IF YOU ARE INTERESTED IN ANY OF THESE PLEASE CALL 253-606-1298 IF NO ANSWER AT FIRST # 253-229-4584. (PLEASE DO NOT EMAIL WILL NOT RESPOND BACK ).”

http://seattle.craigslist.org/tac/cto/1944804004.html

UPDATE: **SOLD** Was $3500.

(12/03/09) This looks like a solid CJ-2A.

“I have a 46 willys with small lift on 33 in tires runs great real good power everything works also have back seat bimini full top with 20 or so positions and doors that are removable lotf new parts carb intake starter ignition module and coil, radiator ”

Update:  **SOLD** Was $3200

(09/01/08) This has been for sale for a year plus.

“225 buick v6, 4wheel power disc, 5:38 gears, locked front/rear, spring over, 35″goodyear mtr’s, warn overdrive, power steering, tilt wheel, custom gas tank under rear, new sides, floors, wheel tubs. little to make it go again, ran great when i started the rebuild on body..3 years ago. garaged for last 10 years. just needs some finishing. new heat tech heater (28k btu). firm price, lots done and trail proven!! type “dutch” in subject like or i will mark as spam!

UPDATE: **SOLD** Was $1050.

This looks to be solid.  It might be a good price.

“I have lots of new parts. This jeep is in very good condition for a 1946. The title is clear and the registration is current. Needs engine finished and to be assembled ”

Parts Jeep?

“47 Willys Jeep, L head 4 cyl. all there, not running, floor and seats gone Has Buick 6 that goes with it, probably only good for core. Really cool front bumper, steel 16.5 wheels, heater on floor of passenger side. Have soft top and doors, original under seat gas tank, extra jerry cans. No title, could spend a ton of money and have something super nice or just spend a little bit of money and have a really fun runner. Maybe a Rat-Jeep.”

http://seattle.craigslist.org/tac/cto/1940100509.html

UPDATE: **SOLD** Was $900.

Here’s a project.

“Great project jeep, needs a motor rebuild, seats and some other stuff. Parts are cheap and accessible on http://www.walcks4wd.com/ and other sites. Easy to work on, excellent MOAB or 4wd digging jeep. Here are some Pics. Serious inquiries only please. ”

UPDATE:**SOLD** Was $1500

(07/07/09) “1946 Jeep Willys For Sale, 3 speed, CJ-2A,  Straight 4 cylinder engine, Aftermarket windshield wipers, Electrical System updated to standard 12V system. New starter – rebuilt by Vanetta Electric.  Rear Roll bar. Clear glass Bowl Fuel Pump. Clean Title – VIN#36346. Over $4,000 of engine work done by a 4WD Center in Minnesota in 2004. Seats need to be replaced. ”

UPDATE: **SOLD** Was $2000.

(09/02/2010) This might not be a bad price.

“This 1948 Willys CJ2A Jeep has a 1961 283 Cubic inch Corvette engine. New brakes, Newer tires, Fresh tune up, Tow bar. Good for hunting or off road fun! Needs very little work. Asking $2000.00”