UPDATE:  **Status Unknown** WAs priced at $3000

(07/19/2010) “I have a 1951 jeep willys project that I am looking to sell or trade. the willys has a odddfire buick v6 in it that runs good, I bought a brand new rebuilt narrowtrack dana 30 front axle with a spartin locker and regeared to 5.38, I started the yjspring over on the front already but just tacked up, have the rear springs too just haven’t started on that yet, have a lot of extra parts. Have the windshield and everything just took it off so it didnt get broken when working on it. The only trades I will consider are a 250 2 stroke 03 or newerer or maybe a 450f. as far as brands im pretty open to them all rm cr yz kx or ktm or $3000.”

UPDATE: **SOLD** Was $4500.

I wonder what’s underneath all that diamond plating.  The yellow one looks solid.

“We have 2 1949 willys jeeps 1 black with original 4 cyl flathead runs good no top or doors 2500.00 1 yellow with 231 V6 runs good has a half cab and doors that need some TLC to go with it 2000.00 also a 1951 jeep for parts, several spare parts,4spare tires and wheels original size all included.”

UPDATE: **SOLD** Was $2500.

This jeep has wood parts? And what is sticking out the front grille?  The rear corners on this look a little sharp.

“I have a 1950 willys jeep with some wood parts that I need to sale that has about $2,000.00 to pay it off.
The jeep is in Aromas ca. for showing and a must see on why it turns heads when driving it.
The body of the jeep is in great shape with new seats roll cage newer engine 4×4 works tranny very strong tires have low miles on them and are in great shape.
The jeep has all ways been stored inside.
would take $2500.00 cash in hand obo
Good luck and thanks for looking.”

UPDATE: **SOLD** Was $650.

(01/03/2011) “1949 Willys Jeep, needs complete restoration.”

Includes a rear PTO.  No pics provided.

“For sale is a Willys CJ-3A jeep. No title, no motor. Body is fair, frame is pretty good. No seats. I was going to rebuild it, but, too many projects “on the fire”,,, I also have a bunch of Willys parts for sale, including flat head motor,(would work in this CJ-3A) rear PTO, body parts (for CJ-2A and CJ-3A, and a few CJ-5), small parts, seat frames, parts for a M-38A1, a fully rebuilt flat head motor, small parts, gas tanks, gauges, rear draw bars, roll bars,,, Love to sell it all as a package.. I am also planning on selling some restored CJ-5’s in time. Thanks !”

http://boise.craigslist.org/cto/2318266866.html

UPDATE: **SOLD** Was $2500.

The seller wants to make a trade.

“I am selling or would like to trade for a car or rv the jeep has a f134 motor in it a t90 trans t18 t case 538 gears and a 8000 pound winch runs great. for more info please email me with pics of the trade and info”

No pics provided.

“1951 Jeep Willys needs someone with time to love her back to health. I bought form the original owner and I have the title ran when last parked. All original including the spiders.”

http://saltlakecity.craigslist.org/cto/2317302650.html

This has some mods, but hard to tell just how much.

“1958 Jeep Willys for sale on Johns Island. Runs good all selas have recently been replaced. Great for the farm. Clean title. Email or call 708-4223 with questions.”

http://charleston.craigslist.org/cto/2306504253.html

No pics. Unsure what it is.

“50’s jeep Willys not sure of the exact year. No title, No motor. Great for parts.$350.00
Call David @208-861-5151”

http://boise.craigslist.org/cto/2305143824.html

No pics provided. This sounds like a flattie built on a ’66 CJ-5 powertrain.

“Jeep was completely rebuilt 12 years ago with a brand new steel body, full roll cage with seat frames tied into cage. 225 cu. in. V-6 engine, trans and t-case out of a 66 cj-5. Pwr steering out of a cj-7. Stock suspension. stock 16″ wheels with radial snows.
Garage kept, no rust. Sorry no pics yet.”

http://newjersey.craigslist.org/ctd/2303227659.html

UPDATE: **SOLD** Was $3000.

This is rough.  Strangely, the two connecting bars between the front and back loops of the roll cage were cut out.  You can just see where they were on both loops.

“1953 WILLYS
BUICK V6
MUNCIE 4SPEED
2 SPEED TRANSFER CASE
$3000”

The seller accidentally lists this as $2000, but it’s really 20,000.  No pics provided.

“6 YEARS TO ENGINEER & BUI LT 307 Chevy 210 HP OFFY Manifold &625 carb hubs all around-538 R&P
44 REAR w/ARB — 30 FRT POWER LOCK
Q78-15 Swapers , dual batteries electric fan
3 SPEED W/OVERDIVE,aux Radiator & Oil cooler
Dual Ranco 5000 all 4 corners,PS-PB.. tilt-tele streeing 5 point 3 inch Harness
FRONT-REAR 5000 LB WINCHS..traction bars
Truss Bars front an rear..10 AUTO meter gauges
6 Step Sequential ignition> ELECTRONIC IGNITION
Hella 100 w fog–Hella 100 w flood–CIBIE 100 W DRIVING

HELL YA ITS EVEN GOT RACING BUCKETS SEATS
runs – fine to many extars to list boxes of left overs lol….
20.000
YES I HAVE PICTURES BUT ONLY TO BUYERS MUST SEE TO BELIVE 20.000”

http://seattle.craigslist.org/sno/cto/2297365569.html

UPDATE: **SOLD** Was $2500

There’s been some updates to this jeep.

“1951 CJ 3A Willy’s Jeep for sale. has a 289 V8 68′ Mustang engine inside of it. 4 wheel drive works good T18 Trans. Must see! Registered with pink ready to go! Asking $2500 OBO.”

No pics provided. Not sure what is here.

“good for parts or fix 2 motors call 646 7100665 send e mail its better motor in jeep is set siezed ran numbers on web said its a 59 i think its military due to bull bar and widicker cables”

http://newjersey.craigslist.org/cto/2294894762.html

UPDATE:  Price dropped to $900

“I have two Willys Jeeps both are CJ3A. Asking 900 dollars for both or make an offer individually. Both have orginal 4 cyclinder engines. Great project jeeps, just do not have to the time to work on. them.”

http://fortmyers.craigslist.org/lee/cto/2294322910.html