UPDATE: **SOLD** Was $1000.
I wonder if this includes the manifolds and carb?
“Willys l134 go devil complete engine”
UPDATE: **SOLD** Was $1000.
I wonder if this includes the manifolds and carb?
“Willys l134 go devil complete engine”
UPDATE: **SOLD** Was $150.
This came out of a 1943 MB/GPW. If you are looking for an alternative engine, this makes a good one, especially at this price.
“M38A1 Military Jeep & M-100 Military trailer. The real thing!
Rebuilt original 4 cyl engine, carburetor, & fuel pump – everything works well.
Trailer has a removeable wooden seat(s) insert and a tubular framework for a top.
Ask price is $7,500 OBO (Verbal appraisal is Approx $12M for the pair).
Cool little piece for a country house, cottage or farm.”
UPDATE: **SOLD** Was $650.
Frank’s selling this Tornado engine.
“This is a 230 taken from a 1964 Wagon to swap in a Chevy. it is clean and complete. Been stored inside since,I was told that it did smoke if let to idle for a period. (Valve seals?)
Has starter,generator and oil bath air cleaner.”
UPDATE: **SOLD** Was $100.
It’s bored .060, so not a ton of life left.
“Was running when pulled, .060 0ver needs rebuild, come get it!”
UPDATE: **SOLD** Was $500.
I’m sure someone could use this.
“Near complete f head engine. Pulled from Willys mb. Only pulled to replace with original L head engine. Been stored in garage since pulled.”
Seller has three different engines.
1. MB Engine $700: https://hudsonvalley.craigslist.org/pts/d/chappaqua-willys-jeep-engine-mb/7072639828.html
2. CJ-2A Engine $350: https://hudsonvalley.craigslist.org/pts/d/chappaqua-willys-jeep-engine-cj2a/7072647819.html
3. CJ-2A Engine $375: https://hudsonvalley.craigslist.org/pts/d/chappaqua-willys-jeep-engine-cj2a/7072645407.html
Someone might like this. This likely includes a T-86 (not a T-96 as I indicated earlier) with a BW overdrive.
https://albany.craigslist.org/atq/d/corinth-kaiser-supersonic-engine-with/7072338412.html
“Complete Kasier Supersonic Engine with Overdrive Transmission also bell housing.”
Seller has four engines in differing conditions.
https://phoenix.craigslist.org/nph/pts/d/phoenix-willys-l134-engines/7072837906.html
“I have 2 almost complete engines for willy’s jeep 4cyl flathead motors $300 each that will need complete rebuild and possibly some machine work done and no heads then I also have 2 bare blocks $100 each that will need to have machine work”
UPDATE: **SOLD** Was $500.
The looks like a good price. It has an unusual carb horn setup.
“Flat head 134 complete. Exhaust , bellhousing and clutch also included. Comes with original starter but have 12volt gear reduction for extra. $500 for engine and $100 for 12volt starter”
UPDATE: **SOLD** Was Make Offer.
Could be worth a look.
“WW2 jeep willys engine. Engine is in a water pump. Marked MB. I’m not sure of the condition, but it does turn free. What you see is what you get. I would like to sell together. Please feel free to make an offer! I will consider any offer. Thanks”
UPDATE: **SOLD** Was $500.
This is a former industrial engine. It has a later model oil bracket.
“Willy’s Jeep L-134 Engine, CJ2A, ‘Go Devil’ 4 cylinder, between 1945
and 1948…. 12 Volt coil and condenser, has good water pump, Carter YS
carburetor, Autolite distributor, good starter and flywheel.
This L-134 engine runs nice with 50 lbs oil pressure, no
smoke, drips, or noises…. solid engine.
Can run this engine on inspection, no generator.
Great for any Willy’s/Jeep application with a L-134 four cylinder.”
UPDATE: Status Unknown. Was $500.
This could work for someone.
“1953 Willy’s Jeep CJ 4 cylinder engine for sale.
Electronic ignition.
It runs and I can let you hear it run.”
UPDATE: **SOLD** Was $300/each.
Seller describes the engine as an F-head, but it’s the l-head that is pictured.
“I have 3 Willy’s 134 cu inch motors for sale.most parts are there.one was running when I pulled it . asking 300.00 each”
UPDATE: **SOLD** Was $400.
Could use some cleaning.
“willys l134 engine for sale $400 obo. turns freely, has newer rear main seal. head looks good, gasket had no blowouts. cylinder walls unscratched. bored .060 over. previous owner said it was running when the clutch went kaput. comes with flywheel and clutch housing, distributor, and manifolds.”
UPDATE: **SOLD** Was Make Offer.
Seems worth an offer.
“Nice engine with less that 500 hours on it. It cam from a WWII generator that had little use. Was running when disconnected and comes with the radiator. Make me a fair offer.”
UPDATE: **SOLD** Was $450.
There appears to be some value here.
“willys jeep engine 4 cyl vinsage model turn over $450 obo”
UPDATE: **SOLD** Was $500.
Jordan spotted this unusual combo. This package creates an early jet powered boat using a Kermath modified L-134 and a Hanley Hydrojet. I’ve included a Kermath brochure and links to the development of the Hydrojet by Keenan Hanley at the bottom of the post.
“Willys Jeep engine block casting number 804380, and Hanley Kermath HydroJet. I’ve never attempted to start. $500”
UPDATE: **SOLD** Was $400.
Might interest someone.
“Ford GPW F Script Engine Block
GPW 6015
GPW 162579
K 11311
Purchased at an estate auction. I do not see a crack below the distributor mounting.
Asking $400”
UPDATE: This FREE setup finally found a home.
Most likely an M-38 or CJ-3A engine based on the oil bracket. Great deal.
“This came out of a (i think ’47 Willys). It was running great before it was pulled. just pick it up and its yours. Need space in warehouse.”
UPDATE:**SOLD** Was $500.
Someone can use these.
“I have two Willys Jeep motors for sale. I believe one is a 1946 and the other is a 1948. One is very complete with the fan, manifolds & carburetor. The other motor has the manifolds, generator and bell housing but no carb. They will both need to be completely rebuilt but have been covered and dry.”
UPDATE: **SOLD** Was $450.
Maybe someone can use.
“Willys F-Head 4 cylinder 134 cubic inch engine. Runs good, no smoke. Crankshaft pulley was welded on at some point.”
Still has plenty of good Buick 225 parts.
https://www.facebook.com/marketplace/item/2426329497444533/
“Frose up make and offer have a 4 speed trans that’s also frose up make and offer or trade for Willys parts”
Seller provides a detailed description of the engine.
https://www.facebook.com/marketplace/item/2369925726576970/
“This is a willys L134 Engine, short block. Not sure the year of the engine, it was removed from a 1948 Willys CJ2A.
Pros- Ran great when pulled, I have a video of it running. Great oil pressure, also have a video.
Block is solid, I can not see any cracks or leaks. It has been rebuilt at one point in its life, the cylinders sleeved back to stock standard 3.125” dia.
Only what you see in the pictures is included in the sale. All internal components are in the engine. Head, Carburetor, Fuel Pump, oil filter canister, oil filler tube not included in the sale.
Cons – One of the exhaust manifold bolts is broken off. One of the pistons has a chipped edge on the top groove, see picture. No shipping local pick up. $450.00 or Best offer, Cash or PayPay only. Thanks for looking, please message me with questions or requests for more pictures or videos. I am parting out (3) Willys so if you need other parts let me know what you need and I’ll see if I have it. L134″
UPDATE: **SOLD** Prices ranged from $150 to $400.
“I have 4 F134 Jeep Willy’s Engines for sale. I assume all will need a rebuild, 2 turn by hand. One is missing the oil pan but the other 3 are mostly complete”