The green one is $250, the brown one $200.
https://www.facebook.com/marketplace/item/3675384929447857
“Willys, Jeep- two (2) 265 lb. farm weights. Refer to pictures for casting quality. Brown- $250.00 (much better quality), Green- $200.00.”
The green one is $250, the brown one $200.
https://www.facebook.com/marketplace/item/3675384929447857
“Willys, Jeep- two (2) 265 lb. farm weights. Refer to pictures for casting quality. Brown- $250.00 (much better quality), Green- $200.00.”
Looks like a good price for all of that.
https://www.facebook.com/marketplace/item/2400505070145285
“Take off from Vintage CJ2A Jeep, PTO Unit and Auger Drill set up. Plus misc parts, In good condition but needs cleaning .”
John spotted this part. I don’t think I’ve seen a side panel shaped like that. Was it in 1975 or 1976 that the Jeep name was dropped so low on the cowl?
https://www.facebook.com/marketplace/item/764593441671685
“NOS Body Side from dealer, original AMC Jeep part. Located just off exit 27 of I-80. Many other Jeep CJ parts available.”
If this is home made, it is pretty well done.
https://www.facebook.com/marketplace/item/704689591822175
“Willys early Jeep home made light weight top no rear window top side is aluminum & sides are steel Britton Mi”
This could be worth a look.
https://www.facebook.com/marketplace/item/684434993900281
“Half cab vintage hardtop. Sitting on a 1965 but will fit others Price is OBO. Just the top for sale not the Jeep”
The two day’s s remaining, the high bid on this is currently $50. Thanks to Mark for sharing it.
https://hibid.com/lot/185245700/jeep-a-trench-6-trencher?ref=lot-list
Ted’s got some parts for sale. He’s got other PTO related parts for sale, too.
For sale are some various Willys Jeep Monroe Three Point Hitch Hydraulic Implement Lift parts. Pricing on the individual parts can be found further down in the listing. These are quite often the rarer or hardest parts to find of the complete Monroe hydraulic lift. These parts are high quality machined and fabricated parts from original Monroe parts I had. I had sold a collection of these Monroe lifts and was always having a hard time finding some of the tougher parts to locate to complete the lift set ups, so I finally decided to use a few of the original pieces I had as templates and replicate these rare parts. Prices quotes will include shipping costs within the states and all mounting bolts and hardware pictured for each part respectively. Below is a list and description of all the parts with pricing. There will be a number next to most of the parts which is the number used to show the parts in the original Monroe lift care and operation manual
#23 Back support bracket for main Housing. This bracket supports the lift Main Housing at rear of Jeep and is bolted to drawbar. Excellent machined part with correct mounting bolts and one hole threaded to be bolted from under Jeep to not interfere with rear PTO Gearbox when installed. Part is actually more rugged than the original cast piece
$150 shipped with mounting bolts and hardware
#9 Center or Top Link adjustment rack plates
These are the adjustment rack plates for top or upper link on the Hitch. These are high quality laser cut plates complete with mounting bolts and hardware to bolt them up to your center link
$75 shipped in the us
#22 Limit Chains Drawbar attachment bolts. These are machined attachment bolts used to hold the limit or anti sway chains to the Jeeps drawbar. Exact match to the originals
$75 shipped for a set of two in the States
#20 Drawbar Clevis or Knuckles. These are the drawbar mounted clevises or some people call them
knuckles that support the right and left hand lower links or arms. Exact fabricated copies of an original piece. Very rugged pieces , painted the Monroe Red
$225 for a set of two Clevises shipped within the states
Monroe main Housing under body support / brace with all mounting bolts and hardware and exhaust mounting angle and bolt
No manual part number on this last part as it’s not listing in manual. Quite possibly one of the rarer or hardest parts to find in a Monroe Three Point Hitch Assembly. I’ve had a bunch of these lifts and had yet to see an original brace. Seems there always discarded or left behind possibly when
Lift is removed from Jeep. I was lucky enough to borrow and original piece from a buddy and have it copied exactly to match the original. These supports or braces are used under the Jeep body to support and secure the Lifts Main Housing to the Jeep bed. Braces are complete with mounting bolts and all hardware
$185 shipped within the states
I included a picture of one of the under body Monroe Housing braces bolted to an original housing
To show how it would bolt up under jeep etc. Also pictured is the original brace or support I used as the template for the fabricated new braces
I will be adding one pic of the original care and operation Manual showing the part breakdown and numbers matching etc
Feel free to contact me with any questions etc. Also have a large collection of Willys Jeep Power Take Off related items and parts I’m selling as well.
Just had a few more sets of the rear draw bar anti sway chain bolts made and are available until gone. Also have a few Complete Willys Truck PTO setups available with Twinstick PTOs and rare two piece driveshaft setups to back of truck and rear pto gearbox output shafts
Ted 860-428-3265
Location Storrs CT prices in post
Other parts for sale: Continue reading
Looks like a lot of parts!
https://www.facebook.com/groups/880278299091751/permalink/1874870619632509
“Selling 10 to 12 pallets of NOS Mite parts. This is the remaining inventory from Surplus City. I have been sitting on this for several years and decided not to start another business. I have around 40K plus freight in the lot. I simply need it gone as I am selling the building. 20k for the lot. There are no pistons or jugs. There is half a pallet of NOS tailgates. Wire harnesses, propeller shafts, drive axle assemblys, Trans and tc gears, gasket sets, suspension bushings, there is really too much to list.”
Andy shared this ad, one that includes parts of an overdrive, condition unclear.
https://loz.craigslist.org/pts/d/eldon-1948-willys-jeep-parts/7705241770.html
“1948 Willys Jeep transmission, transfer case, shifter. Was all working when removed. Replaced with aftermarket.”
Thanks to John for sharing this one.
https://www.facebook.com/marketplace/item/3541019146150577/
“Jeep hard top, fits older cj5 l was told, have doors”
No doors.
https://www.facebook.com/marketplace/item/388518906845209
“Used Koenig hard top for 1950s Era Willys Jeep. Rough, but usable condition. No doors, no glass. Tough to see behind all the weeds, but it came off my ’56 Willys. I am only available to meet on weekends.”
My guess is that these doors fit a CJ-5 hardtop, but I’m not sure. I am sure I’ve seen this style before, but can’t place them.
https://www.facebook.com/marketplace/item/715419610481384
“Old doors for the willy. Not sure what model they are from”
It’s got slight damage, but maybe someone can use it?
https://sfbay.craigslist.org/eby/pts/d/diablo-cj-fiberglass-front-clip/7697111313.html
“One pc front clip for pre 1972 CJ-5. Grill fenders, hood all in one. Good shape not perfect , inner fenders included, comes with hardware to keep the fender tails tightly secured to the cowl. This is the quality thinkness for a driver jeep not the ultra thin racing version.
The new retail price for these is 850$ and that’s without the grill.
Also fits the cowl line of CJ-7, CJ-6 CJ-8 scrambler, willys, M38-A1, DJ-5, disbatch, postal, Jeepster Commando and wrangler YJ but some mods might be necessary install on these Jeeps”
John shared this solid looking Kelly top for a CJ-2A. I can’t make out the model number.
https://www.facebook.com/marketplace/item/859581951930550
“Kelly hardtop for jeep cj2a came off my 46 vec has been taken apart and stored inside for many years nò rot slight surface rust has all the windows doors tailgate glass complete and in great shape”
This is an unusual project. Maybe someone can use it?
https://www.facebook.com/marketplace/item/1352216505685910
“Project Jeep Body Aluminum Jeep CJ8 Body – modified to 4 door”
These are for a Meyere CJ-5 hardtop. Unclear how they fit on a CJ-2A.
https://www.facebook.com/marketplace/item/1404479823749053
“Came off a 2a that I parted years back,”
At least one combo includes a WARN OD.
https://www.facebook.com/marketplace/item/341621008451582
“Selling 3 engines, 4 gearboxes and 4 differentials for Jeep 1960 or older. Prices vary.”
It looks like a good price for the pair. Thanks to Andy for spotting them.
https://desmoines.craigslist.org/pts/d/van-meter-willys-frame-weights/7689732781.html
“Willy’s front frame weights for the Agri-jeep / trenchers and even snow plows in great condition and can load for you ! If you have a new 2023 wrangler Willy’s sport the addition of just one of these weights to the back for traction this winter will make your new “Willy’s” 6.72% percent real Willy’s jeep and the envy of all your fellow “Willy’s” jeep compatriots ! Both weights will of course double the percentage but I must warn you that your head might explode with pride and I recommend just settling for the one ! Percentage will vary with make and model !”
UPDATE: **SOLD** Was $600.
Paul’s got this Meyer hardtop for sale. I agree with him, that it looks to be a Meyer Mark III.
“I think this is a Meyer MIII
top. Surface rust. Rain gutters intact, see pic. Doors
included, windows operate up
and down. No body hinges. Rear
side window glasses, uninstalled,
included.
Extra set of parts doors included,
and a bonus hot water cabin
heater for civilian jeep. I’ll try
to answer any questions.”
This item ships from Wildenberg Parts in the Netherlands.
View all the information on eBay
“Up for sale…
A very rare opportunity.
A NOS Shielded ignition and 12V conversion kit.
Includes all the shielded parts for under the hood.
12V crank pulley
12V Waterpump pulley
12V V Belt.
12V Generator bracket
All the bolts, brackets, condensors, nuts etc.
These do not come up for sale this complete.
Parts might show surface rust due long storage.”
This looks to be a Beck hardtop.
https://www.facebook.com/marketplace/item/1804300683355030
“Steel CJ3A Hard Top and Doors. Looks like everything is there. A little rough, but overall it’s pretty solid.”
David shared a link to these recently listed hubs. They are the nicest example of these hub that I have ever seen. They are currently listed at $999.
View all the information on eBay
“New Old Stock
Spicer 10 Spline Locking hubs in excellent new condition.
Hard to find.
Comes complete with gaskets, sticker, and instructions.”
Wildenberg Parts out of the Netherlands is selling this Ramsey 50R for the M-38. The company has a container leaving for Minnesota soon, so the cost of transport may be reasonable. David can be contacted at +31 (0) 317 618 218 or info @ wildenbergparts.nl (remove spaces around the @)
“The holy grail of M38 parts…
Complete Ramsey 50R winch setup.
Contains:
NOS Winch
Used good condition PTO (very rare)
NOS joints
NOS long shaft
NOS main plate
NOS rubber boots.
New made frame, short shaft, hanger bearing & PTO plate.
€ 8000″
Located in the Netherlands. I have a container leaving to MN soon, so transport could be reasonable.”
Price appears good.
https://www.facebook.com/marketplace/item/713198843743148
“Aluminum top for a willys cj2a. Good condition for age. Could use some plexi glass window replacement and a door handle repair ( easy fab job ) located in illinois.”