Parts Research Archives

To Top

CJ-2A Fiberglass Tub Mineola, TX $750

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

This looks like one of the Acme or Brian Chuchua tubs. It’s a light tub, but surprisingly sturdy.

https://easttexas.craigslist.org/pts/d/mineola-cj2a-jeep-willys-fiberglass/6902004779.html

fiberglass-body-mineola-tx

“I bought this tub and no longer have the Jeep it was going on. It is brand new with no holes. It’s for a Willy’s CJ2A but you could use it on other models. Comes with a new fiberglass hood. Absolutely NO TRADES. Serious CASH offered considered but if you know anything about these you know a new one is at least $2,000.”

 

 
To Top

Meyer Hardtop New Paltz, NY **SOLD**

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $400.

Looks like mostly surface rust.

Early CJ hardtop (was on a ‘55). Good condition, rear door glass cracked. Doors are good with good glass. Have an extra set of doors to choose from. If asking price is met, you can have both sets of doors.”

meyer-cj5-hardtop1 meyer-cj5-hardtop2

 
To Top

PTO Belt Pulley Pittsfield, MA **SOLD**

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $500.

Someone need this?

“Up for sale is a Willy’s jeep pulley. It spins freely and looks to be complete”

pto-pulley-pittsfield-ma2 pto-pulley-pittsfield-ma

 
To Top

CJ-2A Body Randolph, VT **SOLD**

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $375.

“’46-’48 CJ-2A Willy Jeep Tub…Good for ‘Driver’ project, but kinda rough for a restoration…lot of un-needed sheet metal added by ‘Bubba’ (body fairly solid underneath)…$375. or swap for MB/GPW parts…Also have hood and fenders available.”

cj2a-tub-vt

 
To Top

CJ-2A Aluminum Hardtop Terre Haute, IN **SOLD**

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $400.

“I have a full aluminum top with doors built with .065″ gage and obviously hand built by a metal craftsman. Fits my 2A like a glove. I’ve included pictures of the top on the Jeep to show actual fit. Jeep is not for sale. I am in the Terre Haute Indiana area. I’m asking $400 but would consider a reasonable offer. I just want it to be useful to someone looking for a nice hardtop.”

KODAK Digital Still Camera

KODAK Digital Still Camera

KODAK Digital Still Camera

KODAK Digital Still Camera

 
To Top

CJ-5? Koenig Hardtop Billings, MT $500

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

Looks like a CJ-5 Hardtop to me. No doors.

https://billings.craigslist.org/pts/d/billings-jeep-willys-metal-hardtop/6897495668.html

hardtop-billings-mt4 hardtop-billings-mt3 hardtop-billings-mt21

“Not sure what all it fits. Got it with a bunch of other jeep parts I needed. It is in very very very nice shape. Roof, sides, and rear hinged lift gate with glass. No doors. $500.”

 

 
To Top

CJ-5 Halftop Grass Valley, CA **SOLD**

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $500.

(11/09/2018) Christopher is looking to trade his Koenig CJ-5 hardtop for a 3B hardtop.”

“Vintage Koenig half top – sought after piece! All there just needs some metal fixed. Bought with the wrong model and I am looking to swap out for one that fits my cj3b willys. This top Fits early CJ-5.”

koenig-half-top-cj5-4

koenig-half-top-cj5-3

koenig-half-top-cj5-2

koenig-half-top-cj5-1

 
To Top

L-226 Engine Granbury, TX **SOLD**

• CATEGORIES: Engine, Parts This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $500.

This Super Hurricane engine could be a good price.

“1962 Willys Wagon engine. Excellent condition.”

1962-l262-granbury-tx

 
To Top

Custom Aluminum Body Chester, MA $7000

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: Still Available.

(03/28/2019) I be this wasn’t cheap to have custom made.

https://www.facebook.com/marketplace/item/657725864646108/

cj2a-custom-project-ma

“Custom Aqualu CJ2A Body
– Tub – 4″ wider and 6″ longer than stock, 3″ of length added to door area, 3″ of length added to rear wheel area
– Grill – 4″ wider than stock
– Hood – 4″ wider, 3″ longer than stock
– Windshield Frame – 4″ wider than stock
– Front Fenders – 3″ longer than stock
– Storage Tailgate – 4” wider than stock
C
The body package was over $9k from Aqualu. “

 
To Top

Cutlas Hubs Juliustown, NJ $99

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

Maury spotted these early Cutlas hubs on eBay. The seller owns “New Jersey’s largest Jeep parts depot”.

View all the information on eBay

custlas-hubs

 
To Top

Bobcat Fiberglass Hood Shafter, CA **SOLD**

• CATEGORIES: Parts • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $175 ( I have it thanks to Chuck!).

This Bobcat Fiberglass hood looks in good shape. If it were closer, I’d snag it.

“jeep willys CJ (2,3) fiberglass hood asking 175.00”

bobcat-hood-ca

 
To Top

Warn OD $500 & Warn OD to PTO Adapter **SOLD**

• CATEGORIES: OD Saturn/Warn, Parts This site contains affiliate links for which I may be compensated.

Seller is selling both an OD and an OD adapter.

  1. WARN OD Was $500 **SOLD**:
    warn-od-ca
  2. Warn OD to PTO Adapter **SOLD** Was $70:
    warn-od-pto-adapter1 warn-od-pto-adapter2
 
To Top

M-38 Gas Fired Heater Centralia, WA $250

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

Maybe someone needs this?

https://seattle.craigslist.org/oly/pts/d/centralia-m38-jeep-gas-fired-heater/6891301490.html

“Gas fired heater for the M38 jeep. All I have is the heater and the duct. located in Centralia.”

m38-gas-fired-heater

 

 
To Top

Koenig Hardtop Goldstream, AK $250

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

Looks like a good price, especially for Alaska. No doors though.

https://anchorage.craigslist.org/pts/d/palmer-willys-jeep-top/6889886079.html

“Koenig Ironworks, Body Division, Houston Texas.
Original top for Willy’s MB, GPW.
No doors.”

koenig-cj2a-hardtop-alaska

 
To Top

Koenig? CJ-5 Hardtop Wellington, CO **SOLD**

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $500.

I believe this is an early Koenig hardtop.

hardtop-wellington-co1 hardtop-wellington-co2 hardtop-wellington-co3

“Hard top and doors for a Willy’s/CJ5. I originally had got the top when it came with a ’73 CJ5 I had purchased, but since then it’s been replaced with a soft top and doors, so this has been sitting in my garage while I debated whether to sell it or not. I believe it was originally intended for older models (50s to 60s models), but it installed okay on the ’73

The doors come with the top. Windows are intact.”

 

 
To Top

Koenig CJ-6 Hardtop Houston, TX $250

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

Seller has other CJ-6 parts for sale, too.

https://galveston.craigslist.org/pts/d/houston-1957-cj6-willys-jeep-koenig/6870684126.html

cj6-koenig-hardtop-houston-tx

“Early CJ6 Willys Jeep Koenig Ironworks Hardtop. The doors and outer roof skin have been media blasted. I have all of the hardware for the door sliding windows and sliding windows for the side panels. The rear hatch is missing, I never had it and dont know where it is. Seeing that it would basically be a flat piece of sheet metal with a top hinge it would probably be pretty easy to make one. The top is in reasonable condition, and I believe would only need some minor repair, new glass, and a rear hatch door to be 100%. I am asking $250 obo.”

 
To Top

Koenig CJ-2A Hardtop Tustin, CA **SOLD**

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $650.

Appears to need some glass

koenig-hardtop-cj2a-tustin-ca1 koenig-hardtop-cj2a-tustin-ca2

“Cj2a Willys Jeep hardtop talk about rare to find 650 or best offer. Also willing to trade for M37. Dodge Power Wagon parts”

 
To Top

CJ-3B? Cab Enclosure Hardtop

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

It looks like this might fit a CJ-3B.

https://missoula.craigslist.org/bar/d/missoula-1940s-willys-jeep-topper/6888946130.html

“This topper came off a 1940’s or 1950’s Willys Jeep. We don’t have the windshield glass. We are asking $500 or trade.”

cj3b-cab-enclosure-hardtop

 
To Top

Rapport Dual Wheel Adapters St. Paul, MN **SOLD**

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: Sold. Was $675.

That’s to Steve for reminding me to post these Rapport dual wheel adapters. I’d forgotten.

rappart-dually-adapter-mn

“Dual wheel hubs for cj2a – 3a – 3b Willys Jeep. Comes complete with 1 set of right hand studs and 1 set of left hand studs. There are 2 chips out of the flange on one of the hubs but they do not interfere with its work ability( see the photo). Shipping will be the actual cost of shipping a 47# box to you location. If you have any questions text me a name and phone number and I will get back to you as quick as possible”

 
To Top

Pig Rack Designed for Willys Truck Shafer, MN $100

• CATEGORIES: Parts, Willys Trucks This site contains affiliate links for which I may be compensated.

Here’s an odd item.

https://minneapolis.craigslist.org/ank/pts/d/shafer-pig-rack-for-early-willys-pickup/6867579098.html

“Pig rack for Willys pickup, been in storage for many years. Very unique item. Has sliding rear lift gate. Came off ’52 Willys that worked the stockyards down in St. Paul MN”

pig-rack-willys-truck-mn

 
To Top

CJ-2A Aluminum Hardtop Wyandotte, MI $200

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

No pics provided.

https://lansing.craigslist.org/pts/d/wyandotte-cj2a-full-metal-top/6881744875.html

“Full Metal top with doors, came off a 1946 CJ2A, I think it is aluminum, it has a “Cyclone” emblem on the tailgate, it has driver side 6 Volt fan, and 6 Volt dome lights on both door posts. Glass has been replaced with plexiglass, metal is weather beaten but in fair condition.”

 

 
To Top

MB Parts Kansas City, KS No Price

• CATEGORIES: MB, Parts This site contains affiliate links for which I may be compensated.

Unclear if seller will sell any parts at this point, but you never know.

https://kansascity.craigslist.org/pts/d/kansas-city-ford-gpw-willys-mb/6888087648.html

mb-ks

“I have an assortment of parts, engines, frames and accessories – enough to build two full wwII style jeeps. I also have a 1951 DK trailer, whole and complete, as well as a 1942 MB trailer in parts. Im looking to sell it all eventually, or one vehicle at a time. Im putting this ad out there to gauge interest. Not sure what Im asking just yet, and I can provide pictures as asked.”

 

 
To Top

CJ-3B Aluminum Hardtop Berlin, CT $400

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

No pics provided.

https://hartford.craigslist.org/pts/d/kensington-willys/6883071018.html

“1954 willys cj3b all aluminum cap very rare come and get it”

 

 
To Top

Koenig Winch 100J Princeton Junction, NJ eBay

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

Gayland spotted this winch package.

View all the information on eBay

“Very rare Koenig crankshaft driven winch assembly for a Willy’s Jeep. I believe most of the parts are there, but I am not 100% this is complete. I can ship this but I would rather a local pickup contact me for shipping charges.”

koenig-100j

 
To Top

Year? CJ-2A & Other Parts Gaylord, MI

• CATEGORIES: CJ-2A, Parts This site contains affiliate links for which I may be compensated.

No pics provided.

https://nmi.craigslist.org/pts/d/willys-cj2a-jeepcj2a-parts/6884074268.html

“I have a complete 1946/1947 cj2a jeep not running…..the drive train is excellent working and movable..(engine has stuck valve in guide).. …..good title…….

Have a 1951 m38 jeep military with arctic aluminum military ordinance cab……..

I have some other parts for these jeeps….extra complete rolling chassis(with good title….bought with no tub) with new springs front and rear axle….bearings…brakes…nushings….engine/trans/transfer case assembly’s and a project cj2a i started that has the chassis and new springs and bearings….. been sand blasted and military olive drab paint…… no pics though…

have buick 225 dauntless jeep engine and trans with transfer case…also carbureted 231 buick engine with low miles”