Parts Research Archives

To Top

FC-150 Bed Cottonwood, CA **SOLD**

• CATEGORIES: FC150-FC170-M677, Parts This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $300.

Bill shared this ad.

“Late 50’s early 60’s Willys FC pickup bed, some rust in fenders but overall very straight and solid. No tailgate.”

fc150-bed-cottonwood-ca

 
To Top

Willys Parts in Vancouver, BC

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.
  1. Misc parts (no pics) Langley, Canada: https://vancouver.craigslist.ca/van/pts/d/willys-jeep-parts/6547002835.html
  2. M-38A1 Parts Burnaby, Canada: https://vancouver.craigslist.ca/bnc/pts/d/1952-willys-m38a/6537912678.html
  3. CJ-2A Parts Vancouver, Canada: https://vancouver.craigslist.ca/nvn/pts/d/willys-jeep-cj2a-cj3a-parts/6499571848.html
  4. CJ-3B Parts Jeep Chilliwack, Canada: https://vancouver.craigslist.ca/pml/cto/d/1951-willys-jeep-tin-top/6489434848.html
 
To Top

Dualmatic and Warn Summer Hubs Central Point, OR **SOLD**

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

Bill shared these.

  1. Willys Summer Hubs, early waffle version. **SOLD** 
    “These are very old Warn hub covers. Mostly they are antiques or novelties now I think. They would be used if one wanted to tow their jeep or operate it in 2WD for extended periods of time without pushing all the front axle, drivelive, ect. They are designed to let the front wheels turn freely without allowing grease out or dirt in. Very nicely made with Torrington bearings. I’ve never seen these before, maybe another Jeep nut has and knows more than I do about them.”
    warn-summer-hubs-cp-or
  2. Dualmatic Hubs **SOLD** Was $100.
    “WILLYS JEEP HUBS to fit on DANA 25 front axle with 10 spline shaft. These Do not require the axle nut be cut off like some of the new hubs do. There are 4 hubs here, 3 are made by Dualmatic and the 4th is of a kind I have not seen before, it just says “Denver”.”
    dualmatic-cp-or2
 
To Top

Vintage Kayline Tire & Gas Can Carier Marcola, OR $60

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

Looks like it could be cleaned up and used some more.

https://eugene.craigslist.org/pts/d/willys-jeep-tire-holder/6528561596.html

“I have a Kayline jerrycan and spare tire holder that came off a 1950 CJ jeep.”

kayline-tire-gascan-holder

 
To Top

Flat fender Steps Albany, NY $50

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

These replacement steps run about $20 (before tax and shipping) less than new ones.

https://albany.craigslist.org/pts/d/willys-jeep-steps/6529295463.html

“New in box set of steps for an early CJ model”

steps-albany-ny

 
To Top

Rear PTO Setup Bonduel, WI $950

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

UPDATE: Still Available.

(03/15/2018) Will need seals.

https://greenbay.craigslist.org/pts/d/47-cj2a-complete-pto/6525986907.html

“Complete pto out of a 47 cj2a. Needs seals 950 obo”

1947-rearpto-greenbay-wi

 
To Top

Flattie Fender & Hood Salem, OR **SOLD**

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $200.

Jacks’ got these for sale.

“Willys hood and fenders, not in bad shape, but not great, easy fix for somebody somewhat adept at bodywork, or run as is
Reply for pictures,”

fenders-cj

 
To Top

Hand Crank for Game Albany, OR $50

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

Marty spotted this unusual winch designed to bolt on the back of a CJ-5.

https://salem.craigslist.org/pts/6518506168.html

“I am selling a hunting apparatus/table that bolts onto the back of your Jeep CJ. It is a table setup with over 200 frt of rope on a crank so you extract your game out of tough areas. It’s high quality and heavy duty.”

hand-game-winch0

hand-game-winch1

hand-game-winch2

 
To Top

Patch Panels Windham, CT $200

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

Anyone need some patch panels?

https://newlondon.craigslist.org/cto/d/cj2a-cj3a/6521157552.html

“CJ2A cj3a Willy’s Jeep patch panels rear fender and front cowel fender/step
Hand made driver and passenger
$200 for each rear fender flat
$175 for front cowel
Can make smaller patch panels with my forms for different price depending on size.”

patch-panels-ct

 
To Top

CJ-2A/3A Parts Milford, NH **SOLD**

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1000.

This parts lot includes an engine with a DJ-3A gauze air cleaner. It’s bent up a bit, but I’d be interested in it should someone purchase this lot of stuff.

“1940 era CJ jeep parts. three engines, two running. transmission, cases, gears new and old, chassis with 4 new leaf springs and shocks, grill, axles, driveshafts, etc., parts and parts. Mostly original parts many in good condition and some not. I never threw much away. One never knows what “little tidbit” they would need but couldn’t find or cost too much to buy. No sheet metal/ body panels. Selling the lot of stuff as a package deal and buyer must take all. First $1000 takes it.”

jeep-pars-milford-1 jeep-pars-milford-2

 
To Top

CJ-2A Parts Paradise, CA

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

Seller is parting out a 2A. Engine is available.

https://chico.craigslist.org/pts/d/cj-2a-jeep-parts/6516928304.html

“Failed jeep sale.
I have a CJ2A jeep that I will now part out. I have:
4-cyl flathead engine
Transmision and transfer
Front axle
Rear axle
Springs
Steering parts
A botched frame
Hood, fenders, grill
A tub, dash and firewall have been removed. Rest of tub is straight
Fuel tank and seats.
Will sell all or parts.”

 
To Top

Early Wagon Hubcaps Blairstown, NJ $40

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

Steve spotted these hubcaps for sale. I believe they were used on early wagons.

https://newjersey.craigslist.org/pts/d/willys-hub-caps/6491673409.html

“I have 3 Willy’s dog dish hub cap. Looking for $40 for all 3 together. There in ok shape. Let me know if interested. Cash in person only. Do not contact me if that doesn’t work”

willys-hubcaps

 
To Top

Rear jeep Bumper Wichita, KS $25

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

These bumpers were manufactured for jeeps.

https://wichita.craigslist.org/pts/d/willys-cj2a-jeep-rear-bumper/6510120301.html

“Came off of willys 1948 cj2a. Fit over the standard bumper without removing it. Lights worked. In good shape.
The slight rust on the upper corners do not go through the metal.
The front bumper pull hitch is an additional $15 if you would like to purchase.”

jeep=bumper-wichita-ks

 
To Top

HI Compression F-134 Head Mesa, AZ **SOLD**

• CATEGORIES: Engine, Parts This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $150.

Paul spotted this hi-compression head designed for high altitude engines. As I understand it, the “High Altitude” option had a higher compression ratio of 7.4:1, compared with the stock ratio of 6.9:1.

“Hi compression Hi altitude Head for the tough Hurricane 4 motor . It is complete with valve train and has been freshly resurfaced . If you spend time up on the rim or any other place where altitude could be an issue for full performance then this is the answer for you .
Thank you for looking . I also have other 134 cu in Hurricane 4 parts available upon request”

hi-compress-fhead-phx-az

 
To Top

Burns 2 x 1 Intake Manifold L-head **SOLD**

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

UPDATE II: Bill added a couple pics of a similar, but different burns head.

DSC04442

8-16-17Fowlerwillysengine011 12-23-17 39 & 41 willys coupes 019 12-23-17 39 & 41 willys coupes 020

UPDATE: **SOLD** for $1025 on eBay!

Matt spotted this rare dual intake manifold manufactured by Burns. I’ve never run across one.

burns-2x1-manifold-lhead1

burns-2x1-manifold-lhead2

burns-2x1-manifold-lhead3

burns-2x1-manifold-lhead4

“Up for auction are a used Burns aluminum 2 X 1 barrel carburetor intake manifold along with the cast iron exhaust manifold and two Carter YF carburetor cores for a Willys Jeep four cylinder 134cid L-head engine. Although there seems to be a plethora of accessories for vintage Willys Jeeps there exists very few horsepower enhancements for the early Jeep flat head four cylinder motors. A few after market manufacturers in the 1950’s such as Hickey Enterprises developed a high compression cylinder head and Burns, who had been manufacturing aluminum 2X1 intake manifolds for Model A and Model B Ford banger motors, developed and intake manifold for the Willys Jeep four cylinder L-head engine .
Continue reading

 
To Top

Empire Tractor Parts Lawrence, KS **SOLD**

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1000.

Seller has some tractor parts.

“I Have A Almost Compleat Rare Empire Tractor For Sale ! Made From 1946-1951 Will Not Part Out ! I Have Front End Grill Dash Jeep Motor Trans. Transfer Case ( Which Is What Came With ) ! Rear Hams 1 Fender Frame I Also Have 2 Others Not For Sale ! Yellow One Is What It Looks Like When Restored !”

empire-tractor-lawrence-ks

 
To Top

3 Braden Winches Oxford, PA $500/each

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

Bill shard this ad.

https://lancaster.craigslist.org/tls/6505574461.html

“Branden Winches manufactured in Broken Arrow, Oklahoma. Great condition, hardly used if used at all. Bolted on steel brace. I have three available, which have been stored properly for several years.

(1) Model A8-9 3,200 lb capacity full drum
16,000 lb capacity continuous duty

(2) Model ARMS3-10R 4,300 lb capacity full drum
9,000 lb capacity continuous duty

$500 each. Please email if interested.”

3-braden-winches-lancaster-pa

 
To Top

Warn “Summer” Hubs Gig Harbor, WA $120

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

These are the later “dimple” model of hubs.

https://seattle.craigslist.org/tac/pts/d/willys-jeep-vintage/6506872440.html

“Willys jeep aftermarket front hubs
They are nicely used,
but are in nice condition
They still have all of the needle bearings on comes with the original box
The box is damaged on one side but has the original directions
$120 cash obo”

warn-summer-hubs-dimpled

 
To Top

Meyer CJ-5 Hardtop Las Veas, NV $350

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

Seller posted this as a CJ9 hardtop. The back may be a little damaged.

https://lasvegas.craigslist.org/pts/d/1957-willys-jeep-cj9/6503830260.html

“1957 Willy’s Jeep CJ9 Top & Doors”

1957-cj5-meyer-lv-nv2 1957-cj5-meyer-lv-nv

 
To Top

CJ-8 Scrambler Tub Albany, NY $1000

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

Not many of these floating around.

https://albany.craigslist.org/pts/d/cj8-tub/6505967895.html

“Jeep cj8 scrambler tub for sale needs work front body mounts and the floors are starting to rot but the tub is still good to save.”

cj8-scrambler-body-albany-ny

 
To Top

CJ-2A Body Bismark, MO **SOLD**

• CATEGORIES: Body Parts, Parts This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $900.

I can’t tell if that’s bondo or paint on the side.

“Very good body with tailgate fenders hood grill and windshield
Make cool rock crawler project or rat rod no title. $900 or trade”

cj2-body-stlouis-mo

 
To Top

Marine Exhaust Question

• CATEGORIES: Features, Parts This site contains affiliate links for which I may be compensated.

UPDATE: Rudy has a similar exhaust manifold, but it is cast iron.

marine-head1 marine-head2 marine-head3

Dave writes that he picked up this boat marine inboard exhaust manifold. The former owner said he tried to google it, but could find no information. It came off a Jeep mb motor. Anyone recognize it?

marine-exhaust-2 marine-exhaust-1

 
To Top

CJ-2A Body and Parts Visalia, CA $100

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

There’s value here.

“I have an original 1946 CJ2a willys jeep tub. There’s plenty of rust but maybe a panel or two might work for you. Also includes the misc. parts in the tub (grill, windsheild, etc.) and the roll cage. Need it gone asap! Asking $100, make me an offer. Will consider trades for other CJ2a parts. Need a back seat, rear leaf parts for the survivor.”

https://visalia.craigslist.org/pts/d/1946-cj2a/6495897618.html

1945-cj2a-body-visalia-ca

 
To Top

Fiberglass Tub & Soft Top Ballston Spa, NY $900

• CATEGORIES: Body Parts, CJ-2A, CJ-3A, Parts • TAGS: This site contains affiliate links for which I may be compensated.

I’ve seen another wide brim fiberglass tub from the northeast similar to this, but have yet to know who was building them.

“Up for sale is a Willys Jeep CJ2A fiberglass tub and a soft top to go with it. The tub is used, but in really nice condition. The soft top is vinyl, made by besttop, has the bows, doors, and the hardware to go with it. The top does need some cleaning, but not in terrible shape. If you have been looking for these items then you know what they go for new (not cheap). I also have other CJ2A parts. If you are interested in any of those let me know what your needs are and I can let you know what I have. This is a cash only deal.”

https://albany.craigslist.org/pts/d/willys-jeep-cj2a-fiberglass/6494550358.html

cj2a-fiberglass-body-ballstonspa-ny1 cj2a-fiberglass-body-ballstonspa-ny2 cj2a-fiberglass-body-ballstonspa-ny3 cj2a-fiberglass-body-ballstonspa-ny4

 
To Top

1953 Stainless Tailgate Reno, NV $430

• CATEGORIES: Parts, stainless/jewels This site contains affiliate links for which I may be compensated.

Looks like a  good price.

“New stainless steel tailgate”

https://reno.craigslist.org/pts/d/1953-willys-jeep-stainless/6493211506.html

stainless-tailgate-reno-nv