Steve shared this one. It has some surface rust.
https://newjersey.craigslist.org/pts/d/vintage-meyers-hardtop-cj-jeep/6541400320.html
“Vintage Meyers Hardtop CJ Jeep $500 or best offer”
Steve shared this one. It has some surface rust.
https://newjersey.craigslist.org/pts/d/vintage-meyers-hardtop-cj-jeep/6541400320.html
“Vintage Meyers Hardtop CJ Jeep $500 or best offer”
UPDATE: Still Available.
(03/10/2018) A little dented, but no obvious rust.
https://klamath.craigslist.org/pts/d/willys-bed-extension/6524283159.html
“Bed extension box, includes original Willy’s stamped tailgate. It has been sanded and primed with spray paint. IT FITS A CJ3A WILLYS JEEP. I also have other body parts for a Cj3a. $500 for the bed extender.”
UPDATE: **SOLD** Was $350.
This looks like a good price.
“Selling this rare T-1 westinghouse air compressor for a willys jeep or world war 2 jeep.
These were used for deflating and inflating tires on the battlefield or spraying paint or agricultural use.
VERY rare and it’s currently attached to an electric motor as a 1960’s home built air compressor but it works and can be easily removed and used on a jeep.
I am asking $350 or best offer for it.”
UPDATE: **SOLD** Was $300.
Bill shared this ad.
“Late 50’s early 60’s Willys FC pickup bed, some rust in fenders but overall very straight and solid. No tailgate.”
Bill shared these.
Looks like it could be cleaned up and used some more.
https://eugene.craigslist.org/pts/d/willys-jeep-tire-holder/6528561596.html
“I have a Kayline jerrycan and spare tire holder that came off a 1950 CJ jeep.”
These replacement steps run about $20 (before tax and shipping) less than new ones.
https://albany.craigslist.org/pts/d/willys-jeep-steps/6529295463.html
“New in box set of steps for an early CJ model”
UPDATE: Still Available.
(03/15/2018) Will need seals.
https://greenbay.craigslist.org/pts/d/47-cj2a-complete-pto/6525986907.html
“Complete pto out of a 47 cj2a. Needs seals 950 obo”
UPDATE: **SOLD** Was $200.
Jacks’ got these for sale.
“Willys hood and fenders, not in bad shape, but not great, easy fix for somebody somewhat adept at bodywork, or run as is
Reply for pictures,”
Marty spotted this unusual winch designed to bolt on the back of a CJ-5.
https://salem.craigslist.org/pts/6518506168.html
“I am selling a hunting apparatus/table that bolts onto the back of your Jeep CJ. It is a table setup with over 200 frt of rope on a crank so you extract your game out of tough areas. It’s high quality and heavy duty.”
Anyone need some patch panels?
https://newlondon.craigslist.org/cto/d/cj2a-cj3a/6521157552.html
“CJ2A cj3a Willy’s Jeep patch panels rear fender and front cowel fender/step
Hand made driver and passenger
$200 for each rear fender flat
$175 for front cowel
Can make smaller patch panels with my forms for different price depending on size.”
UPDATE: **SOLD** Was $1000.
This parts lot includes an engine with a DJ-3A gauze air cleaner. It’s bent up a bit, but I’d be interested in it should someone purchase this lot of stuff.
“1940 era CJ jeep parts. three engines, two running. transmission, cases, gears new and old, chassis with 4 new leaf springs and shocks, grill, axles, driveshafts, etc., parts and parts. Mostly original parts many in good condition and some not. I never threw much away. One never knows what “little tidbit” they would need but couldn’t find or cost too much to buy. No sheet metal/ body panels. Selling the lot of stuff as a package deal and buyer must take all. First $1000 takes it.”
Seller is parting out a 2A. Engine is available.
https://chico.craigslist.org/pts/d/cj-2a-jeep-parts/6516928304.html
“Failed jeep sale.
I have a CJ2A jeep that I will now part out. I have:
4-cyl flathead engine
Transmision and transfer
Front axle
Rear axle
Springs
Steering parts
A botched frame
Hood, fenders, grill
A tub, dash and firewall have been removed. Rest of tub is straight
Fuel tank and seats.
Will sell all or parts.”
Steve spotted these hubcaps for sale. I believe they were used on early wagons.
https://newjersey.craigslist.org/pts/d/willys-hub-caps/6491673409.html
“I have 3 Willy’s dog dish hub cap. Looking for $40 for all 3 together. There in ok shape. Let me know if interested. Cash in person only. Do not contact me if that doesn’t work”
These bumpers were manufactured for jeeps.
https://wichita.craigslist.org/pts/d/willys-cj2a-jeep-rear-bumper/6510120301.html
“Came off of willys 1948 cj2a. Fit over the standard bumper without removing it. Lights worked. In good shape.
The slight rust on the upper corners do not go through the metal.
The front bumper pull hitch is an additional $15 if you would like to purchase.”
UPDATE: **SOLD** Was $150.
Paul spotted this hi-compression head designed for high altitude engines. As I understand it, the “High Altitude” option had a higher compression ratio of 7.4:1, compared with the stock ratio of 6.9:1.
“Hi compression Hi altitude Head for the tough Hurricane 4 motor . It is complete with valve train and has been freshly resurfaced . If you spend time up on the rim or any other place where altitude could be an issue for full performance then this is the answer for you .
Thank you for looking . I also have other 134 cu in Hurricane 4 parts available upon request”
UPDATE II: Bill added a couple pics of a similar, but different burns head.
UPDATE: **SOLD** for $1025 on eBay!
Matt spotted this rare dual intake manifold manufactured by Burns. I’ve never run across one.
“Up for auction are a used Burns aluminum 2 X 1 barrel carburetor intake manifold along with the cast iron exhaust manifold and two Carter YF carburetor cores for a Willys Jeep four cylinder 134cid L-head engine. Although there seems to be a plethora of accessories for vintage Willys Jeeps there exists very few horsepower enhancements for the early Jeep flat head four cylinder motors. A few after market manufacturers in the 1950’s such as Hickey Enterprises developed a high compression cylinder head and Burns, who had been manufacturing aluminum 2X1 intake manifolds for Model A and Model B Ford banger motors, developed and intake manifold for the Willys Jeep four cylinder L-head engine .
Continue reading
UPDATE: **SOLD** Was $1000.
Seller has some tractor parts.
“I Have A Almost Compleat Rare Empire Tractor For Sale ! Made From 1946-1951 Will Not Part Out ! I Have Front End Grill Dash Jeep Motor Trans. Transfer Case ( Which Is What Came With ) ! Rear Hams 1 Fender Frame I Also Have 2 Others Not For Sale ! Yellow One Is What It Looks Like When Restored !”
Bill shard this ad.
https://lancaster.craigslist.org/tls/6505574461.html
“Branden Winches manufactured in Broken Arrow, Oklahoma. Great condition, hardly used if used at all. Bolted on steel brace. I have three available, which have been stored properly for several years.
(1) Model A8-9 3,200 lb capacity full drum
16,000 lb capacity continuous duty
(2) Model ARMS3-10R 4,300 lb capacity full drum
9,000 lb capacity continuous duty
$500 each. Please email if interested.”
These are the later “dimple” model of hubs.
https://seattle.craigslist.org/tac/pts/d/willys-jeep-vintage/6506872440.html
“Willys jeep aftermarket front hubs
They are nicely used,
but are in nice condition
They still have all of the needle bearings on comes with the original box
The box is damaged on one side but has the original directions
$120 cash obo”
Seller posted this as a CJ9 hardtop. The back may be a little damaged.
https://lasvegas.craigslist.org/pts/d/1957-willys-jeep-cj9/6503830260.html
“1957 Willy’s Jeep CJ9 Top & Doors”
Not many of these floating around.
https://albany.craigslist.org/pts/d/cj8-tub/6505967895.html
“Jeep cj8 scrambler tub for sale needs work front body mounts and the floors are starting to rot but the tub is still good to save.”
UPDATE: **SOLD** Was $900.
I can’t tell if that’s bondo or paint on the side.
“Very good body with tailgate fenders hood grill and windshield
Make cool rock crawler project or rat rod no title. $900 or trade”