Anyone need some patch panels?

https://newlondon.craigslist.org/cto/d/cj2a-cj3a/6521157552.html

“CJ2A cj3a Willy’s Jeep patch panels rear fender and front cowel fender/step
Hand made driver and passenger
$200 for each rear fender flat
$175 for front cowel
Can make smaller patch panels with my forms for different price depending on size.”

UPDATE: **SOLD** Was $1000.

This parts lot includes an engine with a DJ-3A gauze air cleaner. It’s bent up a bit, but I’d be interested in it should someone purchase this lot of stuff.

“1940 era CJ jeep parts. three engines, two running. transmission, cases, gears new and old, chassis with 4 new leaf springs and shocks, grill, axles, driveshafts, etc., parts and parts. Mostly original parts many in good condition and some not. I never threw much away. One never knows what “little tidbit” they would need but couldn’t find or cost too much to buy. No sheet metal/ body panels. Selling the lot of stuff as a package deal and buyer must take all. First $1000 takes it.”

Seller is parting out a 2A. Engine is available.

https://chico.craigslist.org/pts/d/cj-2a-jeep-parts/6516928304.html

“Failed jeep sale.
I have a CJ2A jeep that I will now part out. I have:
4-cyl flathead engine
Transmision and transfer
Front axle
Rear axle
Springs
Steering parts
A botched frame
Hood, fenders, grill
A tub, dash and firewall have been removed. Rest of tub is straight
Fuel tank and seats.
Will sell all or parts.”

Steve spotted these hubcaps for sale. I believe they were used on early wagons.

https://newjersey.craigslist.org/pts/d/willys-hub-caps/6491673409.html

“I have 3 Willy’s dog dish hub cap. Looking for $40 for all 3 together. There in ok shape. Let me know if interested. Cash in person only. Do not contact me if that doesn’t work”

These bumpers were manufactured for jeeps.

https://wichita.craigslist.org/pts/d/willys-cj2a-jeep-rear-bumper/6510120301.html

“Came off of willys 1948 cj2a. Fit over the standard bumper without removing it. Lights worked. In good shape.
The slight rust on the upper corners do not go through the metal.
The front bumper pull hitch is an additional $15 if you would like to purchase.”

UPDATE II: Bill added a couple pics of a similar, but different burns head.

UPDATE: **SOLD** for $1025 on eBay!

Matt spotted this rare dual intake manifold manufactured by Burns. I’ve never run across one.

“Up for auction are a used Burns aluminum 2 X 1 barrel carburetor intake manifold along with the cast iron exhaust manifold and two Carter YF carburetor cores for a Willys Jeep four cylinder 134cid L-head engine. Although there seems to be a plethora of accessories for vintage Willys Jeeps there exists very few horsepower enhancements for the early Jeep flat head four cylinder motors. A few after market manufacturers in the 1950’s such as Hickey Enterprises developed a high compression cylinder head and Burns, who had been manufacturing aluminum 2X1 intake manifolds for Model A and Model B Ford banger motors, developed and intake manifold for the Willys Jeep four cylinder L-head engine .
Continue reading →

Bill shard this ad.

https://lancaster.craigslist.org/tls/6505574461.html

“Branden Winches manufactured in Broken Arrow, Oklahoma. Great condition, hardly used if used at all. Bolted on steel brace. I have three available, which have been stored properly for several years.

(1) Model A8-9 3,200 lb capacity full drum
16,000 lb capacity continuous duty

(2) Model ARMS3-10R 4,300 lb capacity full drum
9,000 lb capacity continuous duty

$500 each. Please email if interested.”

Not many of these floating around.

https://albany.craigslist.org/pts/d/cj8-tub/6505967895.html

“Jeep cj8 scrambler tub for sale needs work front body mounts and the floors are starting to rot but the tub is still good to save.”

There’s value here.

“I have an original 1946 CJ2a willys jeep tub. There’s plenty of rust but maybe a panel or two might work for you. Also includes the misc. parts in the tub (grill, windsheild, etc.) and the roll cage. Need it gone asap! Asking $100, make me an offer. Will consider trades for other CJ2a parts. Need a back seat, rear leaf parts for the survivor.”

https://visalia.craigslist.org/pts/d/1946-cj2a/6495897618.html

UPDATE: **SOLD** Was $1200.

These retail for a few hundred more from Overland Diesel.

“Willy’s Kabota conversion kit. This is a conversion kit to install a Kabota V3 series diesel in your Willys or early CJ. This kit is from Overland Diesel in Canada. This is the complete kit. I have the required flywheel but will need some machine work and the specs are on Overlands web site. Changed directions in my project so offering this kit at a savings to who ever may be interested. No import fees or duty tax. Almost any info or questions can be answered on Overland Diesels web site or contact me. I know some and have some experience in this conversion, not all but could probably answer any questions you may have. Boost your HP and torque plus get great mileage from your Jeep”

UPDATE: **SOLD** Was $40.

Looks like a good price.

“Jeep steps for sale, from a 1953 CJ3B, in very good condition, original patina or ready to paint, call or text before 6pm,”

UPDATE: **SOLD** Was $850.

Seems in good shape.

“Complete Koenig King 100 winch from transfer case to drive shaft and mounting plate. Came off a 1960 Willys.”