Anyone recognize this one?
“3pt blade. Unusual design. May be for willys farm jeep with 3pt. Has jeep style toplink. Haven’t confirmed.”
https://columbus.craigslist.org/grd/d/3pt-blade-tractor-jeep/6403737471.html
Anyone recognize this one?
“3pt blade. Unusual design. May be for willys farm jeep with 3pt. Has jeep style toplink. Haven’t confirmed.”
https://columbus.craigslist.org/grd/d/3pt-blade-tractor-jeep/6403737471.html
UPDATE: All the Digger and Trencher parts have sold. I’ll leave this up for now, as the breadth of parts still out in the wild might be of interest to someone. I believe Chris McKay also has some trencher parts.
“For Sale , extensive collection of Go For Digger, Auburn and Jeep A Trench related parts. Would be willing to sell whole lot in a package deal with the Auburn Trencher listed, or sell just the parts or sell all parts separately if anyone is looking for specific parts.
There were two NOS 40″ PTO shafts which I believe were correct for the go for digger and trencher units, one of the shafts has been sold. The other one is still available and in great shape with the exception of many years of shelf life, boots are excellent as is shaft ends and tube. Also the one mount pictured for the Dozer blade has been sold and one of the control valve units as well. There is also a Dozer blade and what looks to be the conveyor belt for a Digger for sale too.
I have attached quite a few pics to show whats included in the lot , lots of bearings ,seals ,creeper gears ,arms ,ring gears , speed reducers , and much much more . Everything I have is pictured but if your looking for a small specific part send me a description or picture and I will see if I have it in the small parts bins. As mentioned I would be willing to sell entire lot but you will def need a full size empty truck as there is a lot of it there. I’ll listen to all reasonable offers on the Jeep and the parts lot and return all emails or calls .”
UPDATE: SOLD. Was $1000.
This ought to interest someone.
“Here’s the tub and front clip that I had planned to use to restore a 1947 CJ2A. I’ve had this on sale for about a year and I’d like to move it on.
Earlier this year my ad read: CJ2A body tub repaired with some alterations. Tail gate eliminated. Flat fender grill in good shape. Flat fender style hood in bar metal – straight but needs prep and paint. Good for custom build. $1,800 ($2.5K on eBay)
So at this point, I’m dropping my price to $1,000 (about 1/2 what I was asking) and if that’s too much for you, make an offer you’re comfortable with – no problem!
All of these parts are located in Winona, MN and are available for you to stop by and see about anytime.”
Gary’s selling this PTO setup. Looks ready to go.
View all the information on eBay
“Up for Auction is a Power Takeoff Package for a Willys CJ2A or CJ3A Jeep. I have owned this for the last 37 years and it is in excellent condition and works perfectly. The auction includes the following items shown in the photos:
The Power Takeoff [Transmission PTO]
The PTO Leather Shift Boot with steel square retaining bracket
PTO Drive Shaft
Rear Gear box [Farm Box]
Flat Belt Pulley [Drum] Attachment
Flat Belt Pulley [14 feet long]
King Seeley Servo Governor with mounting bracket
Governor drive belt [fan belt]
Governor to Carburetor linkage
Continue reading
Gus shared these parts for sale.
“4 Rims $110 (EACH) Orginal rims all powder coating.
3 Tires $110 (EACH) Brand new correct firestone tires.
3 Manafolds $95 one has a crack
2 L-head Engine Heads $200 (EACH)
OUTER STEERING COLUMN TUBES $35
Tie Rod complete assembly good shape $75
TRANSMISSION TOP SHIFTER $80
COMING SOON
2 Orginal COOPER Radiator
2 Transmission bell housings
2Transmissions
2 Flywheels
Rear tow hitch frame
Go devil engine 4 Cylinder ran a year ago
Cleaner Picture coming soon”
https://jerseyshore.craigslist.org/cto/d/cj2a-parts/6411308581.html
Craig spotted this great price on a weight.
“Selling a front bumper counter weight for Willys CJ farm jeeps.”
https://vermont.craigslist.org/pts/d/willys-cj-farm-jeep-front/6407629362.html
Seller has some interesting parts, including T-96 gears (useful for DJ-3As, trucks, Jeepsters, or wagons), a set of M-677 data plates, Warn hubs, and other parts.
“Let me know what youre interested in. Email me with any questions. Some things are NOS and some are never used genuine parts and some are take offs. I have a Whole box of T-96 parts and a good set of warn manual hubs.”
https://toledo.craigslist.org/pts/d/jeep-kaiser-willys/6402734227.html
UPDATE: **SOLD** Was $1000.
Seller won’t ship.
“I have a Newgren lift and PTO setup for jeeps for sale. The lift has the cylinder and adjusters but no arms, controls or tank. As the pictures show, the adjuster bolts need to be straightened. The PTO is complete as far as I know, with an extra Dana 18H included. I will not ship this, but could deliver for mileage. I have a CJ3B that this was with, but it came off a CJ2A. Hasn’t been used since the late 60’s when it was bought.”
UPDATE: Appear to be still available.
“Have 2 250 pound weights for Willy’s jeep
$250 for set”
https://rockford.craigslist.org/pts/d/willys-jeep-weights/6356627429.html
Look like a good price. The also have fender skirts.
“1955-71 CJ5 short fiberglass fenders, good condition, in patina, no cracks or holes. Will fit later CJ5s with short hood setup.”
https://muskegon.craigslist.org/pts/d/cj5-short-fiberglass-fenders/6388881470.html
Bill spotted this good looking deal.
“Took off willys wagon with 20 transfer case 2 gear boxes winch with shaft drive”
UPDATE: **Status Unknown** Was $300.
This blade one may be the same one that was depicted on a CJ-2A that appeared in a 1949 issue of Life Magazine. It certainly looks like the same model at the very least. The only difference I see is that on the blade below an additional plate has been added to the top.
Pics from Life Magazine:
Seller believes this to be home made, but it looks like a Sears Half top to me.
“home made aluminum hard top taken off of a 1946/1953 cj2
very well made, sliding windows”
https://losangeles.craigslist.org/ant/pts/d/willys-aluminum-hard-top/6402631388.html
No doors.
“Sears Allstate aluminum top from 1950s needs glass but all there ,no doors great way to cover your Cj2a Willys Jéep if stored outside,keeps snow out”
https://scranton.craigslist.org/pts/d/sears-allstate-aluminum/6394294335.html
UPDATE: **SOLD** Was $425.
May have some dents on the top rear.
“Hard top for Willys Jeep 42-52. Includes doors. Windows slide and back hatch opens easily. Good glass in back hatch. Missing glass in 1 slider window. Will sell doors separately for $125.”
Craig spotted this ad.
“Sears hard top for a CJ2A, may fit other models. Top is made of Aluminum. Good shape, no holes.”
https://rochester.craigslist.org/pts/d/willys-cj2a-hard-top/6392823620.html
UPDATE: **SOLD** was $200.
Looks like this one has been customized with larger windows.
“Cj2a jeep Willys half cab, comes with doors and steel top only, tub and frame not include.d was used on a farm it’s whole life minimizing the rust. Was removed off 46 cj2a.”
UPDATE: **SOLD** Was $300.
Has no doors. appears sound.
“aluminum half top off a 1953 cj3 has door mounts but no doors also comes with windshield”
UPDATE: **SOLD** Was $500.
It will need glass and door hinges.
“I have a Koenig Hardtop for CJ5 or M38A1.
I have both doors, complete.
It will need new glass.
The only thing missing that I can see are the portions of the door hinges that go on the jeep itself.”
Winter is coming.
“LOOK AT PICTURES AS IT COMES WITH ADDITIONAL BRACKETS FOR MOUNTING AND FOUR PUMP UNITS . CANNOT SAY HOW THE PUMPS WORK AS I HAVE NOT USED IT FOR YEARS. I WILL LOOK FOR A REBUILD KIT THAT I HAVE THAT INCLUDE ALL THE SEALS AND INTERNAL PIECES. PLEASE NOTE = FRONT BUMPER COUNTERWEIGHT IS _NOT_ INCLUDED !!!”
https://toledo.craigslist.org/pts/d/old-willys-jeep-meyers/6348101314.html
UPDATE: Don’s added another flasher to his list of parts.
NOS KAISER JEEP PART. KAISER JEEP CORP. PART # 936026-KIT. 4 -WAY FLASHER GROUP 35-59. ORIGINAL BOX WITH CONTENTS. NEVER USED/INSTALLED. BRAND FLARE STAT 105 Y 103. $350.
REAR TUX BUMPER BRACKETS. THEY HAVE BEEN BEAD CLEANED AND PRIMED RED OXIDE.. $135
N.O.S ., YANKEE 760 4 WAY FLASHER. ORIGINAL IN BOX. $120.
No pics provided.
https://racine.craigslist.org/pts/d/willys-jeep-parts-cj2a-cj3a/6747884777.html
“I have some Willys Jeep parts for sale from CJ2A, CJ3A and CJ3B
CJ2A/CJ3A:
-CJ2A Fold Out Windshield frame: Solid condition $300
-Fenders: $100 each
-T90A transmission (turns freely and shifts, otherwise unknown condition): $175
-D18 transfer case (turns freely and shifts, otherwise unknown condition): $150
-Other misc parts
CJ3B:
-CJ3B hood (no dents, minor surface rust): $250
-Rough CJ3B windshield frame: $50
-F-head 134 engine. Motor ran good, but has spun rod bearing. Selling as a core: $100
-Other misc parts
UPDATE: **SOLD** Was $500.
Seller indicates it turns and shifts fine.
“For sale $500.00 OBO. The PTO, driveshaft and gearbox, It was mounted on jeep CJ2a. The PTO will mount to any dana 18 transfer case. This jeep has been out of service for 30 years, (it was in a shop, covered with a tarp), I got it running, tested PTO the it shifts and turns fine.”
UPDATE: **SOLD** Was $450.
Appears worth a look.
“I believe this to be an early accessory or aftermarket aluminum hardtop setup for a Jeep CJ2A style jeep Willys. As found , will need lever work and new glass but not corroded”
Seller would prefer to sell locally.
“This is a set of Willys CJ2a Jeep original parts. Included is a grille, front fenders, windshield frame, and hood. Some wear but in very good used condition. Some wear on inside fenders and a few stress cracks.”
https://brainerd.craigslist.org/pts/d/1940s-willys-jeep-front-end/6349197317.html