Maybe someone can use?
“$200.00 obo for rat rod or ? has rust to clean up. Tub only.”
https://stlouis.craigslist.org/pts/d/1948-jeep-tub-for-rat-rod/6362575942.html
Maybe someone can use?
“$200.00 obo for rat rod or ? has rust to clean up. Tub only.”
https://stlouis.craigslist.org/pts/d/1948-jeep-tub-for-rat-rod/6362575942.html
UPDATE: **SOLD** Was No Price.
Appears to have some rust.
“1942 Willys Jeep body. Includes tub, window frame, fenders and hood. I was going to use it for a project but decided to go another direction”
Doug spotted this one. Seller also has an FC-150 rear weight for sale, too.
“Cast Iron wieght that mounts to the front of a pre 1971 Jeep CJ. Adds 150 pounds to the front of the vehicle to enhance pulling traction. Rare factory special equipment. 100 OBO . This things heavy! will not ship. I also have a rear weight for a fc150.”
Various parts (variety of pics on Craigslist ad).
https://spokane.craigslist.org/pts/d/many-willys-cj2a-parts/6366475976.html
“I have a few Jeep parts from my collection that I’ve decided to sell. I’d keep them, but I don’t have enough space to store everything and I need cash to finish my shop. I’ll do my best to keep the list current, and I may add more as well. Take your pick:
Original Early CJ2A Windsheild: $400 – in good shape with inner frame. Inner frame is rusted out in a few spots but the outer frame is solid.
Reproduction Tailgate (no stamping): $150 – almost like new, paint is faded
Early CJ2A Body & Front Clip – 1946: $500 – floor pans are gone, covered with flat plate. Underside in general is rough. Has a few holes cut in it, needs a good restoration. Hood and grill are fairly straight, fenders need some repairs around the supports.
Dana 27 & 41 axles: $300 a pair
Frame and Springs: $300 – from a 1947 CJ 2A. It’s pretty rough, bubba welding all over the front end, but nothing a competent welder cant fix. Looks like it had a plow put on it at some point. Coated in a dull red finish that has protected it from rust over the years. Rear half is fairly solid with the stock draw bar. Axles sold separately. No Title.
Chrome Wheels: $100 – Set of 4, 5 on 5.5 pattern with large opening for the big early CJ hubs. There is surface rust, and the tires died 30 years ago (but the tubes hold air!). No bent rims. 1 hubcap.
CJ 5 Rollcage: $150 – Front half is bolted on, the roll bar would work on early CJs as well.
Carburetors: $75 each. I have a Carter and 2 Solex’s.
Fuel, Water, & Oil Pumps $25 each.
Oil Filter Brackets $25 each.”
I’m sure someone can use this.
“Complete MB Body, Brand New, never mounted, still in Primer.
Includes Tub, fenders, Hood, Grill, Windshield, Bumperettes, top bows, and spare tire holder.”
https://cincinnati.craigslist.org/cto/d/complete-new-willys-mb-body/6362368158.html
UPDATE: **SOLD** Was $75.
Looks like a fair price.
“Aluminum top for Willys CJ-2A Jeep…will fit MB/GPW…probably fit a CJ-3A and CJ-3B too…includes original back hatch/door…also includes a pair of front doors that could be modified to fit…just in time for deer season !!! $75…has been removed from the Jeep, Jeep has been sold”
These don’t pop up often.
“If it’s listed it’s still for sale
First come first serve. Will not hold or any b.s.
1955-1969 jeep CJ-5 ventilator windshield in good condition.
Only rust is on glass divider.
Electric wipers
All hardware is on it.
It came off of 1967 v-6 CJ-5
Will fit first year 1955 -1970ish
These are hard to find, and I’m a little sad to sell it but if you have the $ it’s yours.”
I’m sure someone could use these.
“1951 Willys Jeep parts – hood,front fenders,grill,and tailgate.”
https://york.craigslist.org/pts/d/willys-jeep-parts/6357359928.html
UPDATE: **SOLD**
“Snow plow with attachments; hydraulic pump; and controls to fit Willys CJ2A and CJ3. Also CJ2A gearing and service manual.”
UPDATE: **SOLD** Was $300.
This is a good price. It also includes 2 rims.
“2 dj front axels
Also 2 4 bolt wheels”
UPDATE: **SOLD**… Was $150.
Looks like a CJ-5 top, but I can’t tell for sure.
“Hard top and doors is for 52 Willy in fair condition minor rust”
I believe this is a Koenig bed extender. It has the same supports and channels as this one.
“Willys bed extention in good shape. No rust. $500 obo.”
https://seattle.craigslist.org/see/pts/d/willys-jeep-bed-extention/6348880863.html
UPDATE: **SOLD** Was $150.
“Willys MB, CJ2A, Ford GPW parts lot.
Glove box sections, windshield frame, quarter panel, front frame horns, patch panels parts.
Please send your NAME and TEXT phone number if you want me to contact you.
Selling all as one lot $150 OBO”
UPDATE: **SOLD** Was $525.
Dan spotted this rare camper shell.
“Willys Jeep Pick Up Aluminum Camper Shell. I had it on my 1957 Willys Jeep Pick Up.
Standard Willys Jeep trucks had the same cabs and beds from about 1948 to 1962 or so. It would fit these years.
Made by ” Caravan Co, Reno Nevada” Has a steel rack with rollers for a canoe. Strong build.
Needs 1 flat glass side window. Some rust on the top roof vent. Small dings etc. as seen. NO BIG DENTS.
Good original condition. Would polish out or can take CAMO PAINT.
Some photos of it on the truck are black before it was cleaned. Photos off of the truck are as it is today.
Changed the look of the truck a lot. Don’t see many of them out there…”
UPDATE: **SOLD** Was $250.
“Good shape overall but needs some repair.
Only glass is in the doors which is in fair condition… appears original
Windshield in great rot free
Could use some new paint, the roof needs a little repair and has a dent as well.
The majority of the top and doors are Aluminum and the windshield is steel.”
Looks like a good price.
“Kelly-All-Steel Cab for 50-60’s CJ’s. In good structural condition, some glass broken/missing. Believe this company made the hard-tops for Willys jeeps. Very solid!”
https://vermont.craigslist.org/pts/d/jeep-cj-hardtop/6334220440.html
MB Slat body?
“For sale is an original 1942 Willys Jeep Body. The body needs some TLC. It has been sand blasted and primed.”
https://augusta.craigslist.org/cto/d/1942-willys-jeep-body/6340724874.html
UPDATE: **SOLD** Was $300.
It might be a Kelly hardtop?
“Willys cj5 hard top. Doors are in good condition but top and sides have rust. $300 obo.”
Great price on a Belleview or early Warn winch!
“I have a very classic, old school WARN BELLEVIEW winch. Complete with hard to find controller. Would be great for any restoration project on a jeep or truck. was operational last time the truck was in use. Turns over freely and cable looks to still be in good condition.”
https://sandiego.craigslist.org/nsd/pts/d/warn-belleview-old-school-70s/6327827857.html
Could be a good later model tub for the right person.
“Flat fender CJ3B Willys jeep high hood tub fenders mosty surface rust no rot through, was told it was an exmilitary tub from the hole to charge the batteries project went a different direction $350 OBO”
https://phoenix.craigslist.org/evl/pts/d/willys-tub-and-fenders/6324727385.html
I can’t tell just how good (or not) the paint is.
“Will part out”
https://stlouis.craigslist.org/pts/d/complete-willys-body-46/6327402414.html
UPDATE: Still Available.
(06/07/2017) Seller notes it needs some work.
“We have a jeep hardtop that came off of a 1974 Jeep CJ6 which is pretty rare. This hardtop needs work and has some rust but rare, can send more pics if interested”
https://orlando.craigslist.org/pts/d/hardtop-for-jeep-cj6-rare/6310240137.html
UPDATE: **SOLD** Was $700.
(09/19/2017) Looks in good shape.
“Kelly all steel hard top and doors. Great condition. All glass in tact and everything works. Came off a 1963 CJ5. This will fit 1955-1975 CJ5s OR a 1976 and later CJ5 with a pre-1976 windshield frame (the tub perimeter didn’t change, just the windshield frame).”