CJ-2A Parts in Maine: http://maine.craigslist.org/pts/5977717538.html

Medford, Oregon: PTO & Winch: http://medford.craigslist.org/pts/5979846185.html

Body and Fenders in Colorado: http://cosprings.craigslist.org/pts/5986404248.html

Parts, Washougal, WA: http://portland.craigslist.org/clk/pts/5963791148.html

1.  Single 10 spline M?4 (M54 maybe) ——–$15
2. Warn Lock-o-matic M3B. These lock forward and reverse. Good condition. –$150
3. Five M2s (not sets). These can be paired for a set. Very minor dents on outer.  —-$30 each*** All the above are 10 spline 6 bolt (3.5 bolt circle). I am assuming that none are broken at the moment. All hubs sold ‘as is’ and will need to be rebuilt ***
4. One dial only for Warn Lock-o-matic M15B large hub. Fair condition.-$15
5.  One used axle tag 43-8 (5.38 ratio) from 1950’s Dana 25 axle. —-$5

Koenig Model 41 PTO: http://portland.craigslist.org/clk/pts/5963553361.html

Some parts in rough condition.

“Projects that were going to happen but didn’t. Willy’s windshield is original and perfect glass with mirror. Fold out hinges work. Windshield wiper holes at the top, driver’s side and passenger side. Seat frames are in good shape. Bed rails are in good condition. I haven’t seen too many CJ bed rails.
Oil filter is in good shape…no dents that I know of. I’m think they are CJ 2 or 3. 1948 ish. Tow bar is in good shape, only used it once.
The Moog parts are from 1972…I have the vehicle description plate. Would rather sell all together.”

http://sanantonio.craigslist.org/wto/5979433734.html

1. Parts in Gonzales, CA: http://monterey.craigslist.org/pts/5969924149.html
   “Willys mb governor $160 obo…GPW pistons and rods F marked Best offer….Centerforce Clutch gm 158 tooth $120 obo was used a little bit i upgraded to a bigger clutch. 4 Willys 15″ rims steel one spare $160 obo…”
2. CJ-2A & 3A parts McMinnville, OR: http://portland.craigslist.org/yam/pts/5978417000.html
   “I have many old CJ2A and CJ3A jeep extra parts to sell. I am cleaning out my shop and things need to go away. Have probably a complete jeep. Too many parts to list. Price varies on how much you want and need”

Steve spotted this one.

“1854 Willy Jeep front clip…. $500”

https://philadelphia.craigslist.org/clt/5974837147.html

Looks in restorable.

“MB/GPW/CJ2 Jeep hood for sale $125.00 OBO”

http://orangecounty.craigslist.org/pts/5973926462.html

Seller has a variety of parts.

“Parting out a 1948 Willys CJ2A:
(1) Body tub: not rough, repaired and re-repaired, but a good solid restoration candidate, HAS good VIN tag, will be sold on a Bill of Sale for that / with that VIN tag number. No major damage, splits or fractures. All the damage is confined to the floor pans which will need replacement. There is some plastic in the body at the various previous repairs, but used as finish and not patch. All instruments will go with the tub, all footman loops installed, floor shifter cover goes with. $460.00
(1) left front / driver’s side fender, excellent, no rust $85.00 ****SOLD****
(1) right front / passenger side, good, will need minor repair, $75.00
(1) Willy’s logo CJ2A / CJ3A hood assembly with hinge, $260.00
(1) ’48 stamped grill, no turn signals or headlight buckets or trim. Footman loop is gone, grate is excellent $140.00
(1) Emergency brake handle, pully and support brackets $80.00
(1) Steering column with steering wheel, horn button and steering box, ..$200.00*****SOLD******
(1) Steering linkage from box to pitman arm w/ pitman arm, (no tie-rods / no bearings) $100.00
(1) M38 (low / early production ’49-50) windshield frame with retention clamps, no glass, otherwise a 98/100–surface rust only on this piece, very rare. $300.00
(1) CJ2A frame: front spring perches/arches are gone, that is to say that they were ripped off the front of the frame at the cross-tube assembly. No visible cracks at the stays or on the shock tower mounts. Back end has an over-sized hitch assembly mounted and welded to the frame in four places. Rear bumper is perfect, $500.00.

*I will discuss a package deal for everything, but I’m not negotiating by individual piece.
If you’re reading this add and the part you need is not listed I do not have it. I do not have any running gear for sale; no motor, no trans, no air intake / exhaust.
If you’re reading this add and there is no “sold” next to the part, I still have it.”

http://killeen.craigslist.org/pts/5970758084.html

Seller is closing store and has jeeps and parts to sell.

“Hundreds of New and Used Willys/Jeep Parts mostly 1946 to 1970’s – most at or below cost.
Retiring – Closed our Store and now selling off all remaining inventory.
Some complete used Jeeps (CJ2A column shift, M38 flat fender, CJ5 w/304 V8, Pickups, Wagons, etc.), Tubs, fenders, windshields, transmissions, transfer cases, brakes, hubs, etc, etc, etc.”

http://atlanta.craigslist.org/nat/pts/5924027444.html

UPDATE: Still Available.

“I’m selling an original body that came off a late-war Ford GPW Jeep. This is what they call an ACM2, or composite tub, so it would also be correct for your late-war Willys MB.

There’s no rust on the hat channels, no rust holes on the floor, toolbox compartments, fuel sump or pioneer indents. There are no repairs and no bondo. However, there are some minor holes, “character” dings, bends, and bruises that will need some attention. Overall, the body is in great shape! I’ll try to post some photos this Saturday, but you’re also welcome to come look at it in person.

Asking $1500 Sure you can spend a bit more and get a pretty reproduction, but who wants that?! With a bit of work, your WW2 Jeep will be original, not a replica, and it will be more valuable in the long run.”

http://sacramento.craigslist.org/pts/5960030053.html

Looks like a good price. It’s been cleaned up.

“Hello all,

* PHOTOS ARE FROM BEFORE I BLASTED IT! LOOKS MUCH BETTER NOW! JUST HAVENT TAKEN NEW PICTURES YET

GET READY FOR A HARD WINTER! I have a 7″2″ Meyers snow plow that came off a 1949 Jeep CJ3A for sale or trade! Plow is solid besides a few small holes, would be a simple patch weld repair, or just resurface completely. I have blasted the plow and thrown a coat of primer on and painted with miracle paint.

Your getting the complete plow package with the pump. $250 or trade!”

http://philadelphia.craigslist.org/pts/5950755077.html

Not sure what other parts are included.

“Hood, Body Parts, ……..”

http://fortmyers.craigslist.org/lee/pts/5954589903.html

Seller has a variety of parts from WWII forward. Pics provided in the ad.

“Racing seats with covers 150
Warn overdrive off jeep with model 18 tcase.. 1200
Wrangler rear seat 99
2 and 5/16″ ball hitch 30
Jeep home made hitch bolt on type without ball..
Pair of M38 and gpw bumperettes 99
Full cage roll bar.. for m38 flatfender 99
Pro comp tires 30×9.50×15 new with little nippies.. still there.. on rims off 5 on 5.5 lug pattern.
Diamond plate corners 75 for the pair..
Diamond plate rear bumper cover off m38.. 25
Cj2a gpw etc fender I have 1 left decent shape 99
Rat rod light 20…. off a 34 ford I was told
Antigue hotrod Heater antique Chicago brand.. needs work 30
Flatfender cj2a hood- 2 ea – 100 and 199
Seat frames cj2a bottom half.. 35 ea or 50 for both
Buick v6 carb.. was off a runner.. 45
Bantam trailer just regd and titled.. – 1250.. black
Cj7 plastic hub cover – 5
Cj7 or 8 dash… 30
Fhead motor/ block and guts ..needs rbld 99
Lg AMMO utility BOX 28
Orig civilian bantam fulton hitch missing screw mechanism… 50 ….
Cj8 roll bar…. slight bend…. 20.. materials are worth that
Mod 18 case and gears.. one of the mts broke off tho.so pparts only.. make offer
Dana 25 w/parts … axles w rear end etc…50… knuckles 25 ea…
D25 axles alone…. 20 ea or 35 all.. grt for trail spares
Dana 25 brake backing plate 20
Cj2a top bow windshield clamp 20
Cj2a inner window brackets weld on parts 20 adj arm 20
Antique corvette caps.. rare.. orig 99 for both…
Trailer handle for ebrake 2…50 each”

http://sacramento.craigslist.org/pts/5949277446.html

UPDATE: Was $1650.

I’m sure someone could use this.

“Monroe Hydraulic 3-Point Implement Lift Hitch
READ THE ENTIRE LISTING THEN ASK QUESTIONS PLEASE.

Removed by the previous owner from a 1963 JEEP CJ-5 that I just bought.
I was told by the previous owner that it worked when he removed it, but it’s being sold as-is.
Look at the pictures.
You are getting what is pictured and only what it pictured.
1 Monroe Cylinder in its Original Casting — No damage — All 3 Mounting Holes are Good.
1 Reservoir / Valve with Fittings
1 Crank Pulley (I think that’s what it’s called….look at the picture.)
1 Extra Arm
2 Metal Tubes that Ran from the Crank Pulley to the Back of the JEEP (I thing that’s where they went.)
2 Extra Fittings???”

No pics provided. Seller is looking for an overdrive.

“For Sale Parts for Willys Jeep:
6 Volt Headlights
6 Volt Battery
6 Volt Regulator
6 Volt Coil
Horn
Clutch Pressure Plate with Throwout Bearing
Spare T90 Transmission case, input shaft, seals, and various gears
Column shift T90 Transmission top cover plate
Fuel Pump
Fuel level float
NOS gauges
Windshield wiper arms”

http://boston.craigslist.org/nos/pts/5948785407.html

Seller was trying to sell these. Now he just wants to get rid of them.

“I have a bunch of random parts from rebuilding/working on my 1960 Willys wagon, I was trying to sell them, now I just want them gone.. It’s got a 1970 Ford 250 in it so there is stuff for both. There are a set of stock shocks, mismatched locking hubs, a generator, water pumps, some coils some distributer caps, some plug wires, miscellaneous hardware… All ranging from beat to hell to brand new. A great deal at 100 bucks but you have to take it all! I’m just tired of storing it all so come and get it!”

http://seattle.craigslist.org/skc/pts/5945450759.html

UPDATE: **SOLD** Was $425.

Someone ought to be able to use this.

“New glass for 1948 Willys Overland Jeep . 7 Pieces for split windshield.”

Could be a good price.

“This is a plow off of a cj2a. It might fit a 3a and 3b.
I have the plow, 2 electric motors and the plow frame that attaches to the frame of the jeep.
I have not used the plow so I am not sure if they are 6 volt or 12 volt. ”

http://cnj.craigslist.org/pts/5915079377.html