It’s got a small amount of rust, but might be worth a look at that price.
“Cab top for jeep or willys cj. Rear door and latch work. Light works. Solid. Has one rust spot.”
It’s got a small amount of rust, but might be worth a look at that price.
“Cab top for jeep or willys cj. Rear door and latch work. Light works. Solid. Has one rust spot.”
Steve’s got a variety of unused bearings that came with a wagon he bought. He has no use for them. He’d rather give them away to eWillys readers than recycle them. If you are interested, contact Steve at owenwalk@comcast.net.
UPDATE: **SOLD** Was $100
The top might not have much value, but the MB/GPW body in the background appears to have some value. I don’t know if it is for sale, but might be worth asking.
“Homemade steel roof, includes side and rear doors. Was welded on 1942 willys Jeep. Roll bar included.”
UPDATE: **SOLD** Was $100
Most of these I run across on Craigslist aren’t in this good of shape.
“Rear draw bar or bumper off a 1964 cj3b. Great condition. ”
UPDATE: **SOLD** Was $750.
Looks like a nice hardtop. I like the carrier mounted on top. Not sure if this is a 2A or 3A top. Is it a worman? or steel sears top?
“I have a hardtop for a Willys for sale. It is in amazing condition. I originally purchased it for my GPW and didn’t realize I needed the taller windshield. This is for the CJ2a and 3a taller windshields.
It is complete with all pieces.”
UPDATE: **SOLD** Was $450.
Needs a couple pieces of glass.
“Koenig model 330 hard top with doors, real clean shape, no rust,super clean inside, fits cj flat fender jeeps, missing 1 side glass in cab , missing 1 door glass, doors have latches, handles and regulaters, back glass is broke, has rear latch assembley, missing outter handle, call for more info,”
Looks like it fits a CJ-5/6.
“kelly Steel Cab off a 1955 Willys Jeep, needs some minor repairs. Please email for more pics or additional information.”
UPDATE: **Status Unknown** Was $2000 and located in St. James, NY.
This is a rare item. This was on Facebook a few days ago.
“Once in a lifetime opportunity for the jeep restorer. This is still new in box Kelly Mfg co jeep half cab for a cj3a complete, w doors, glass etc”
It’s got some dings.
“I have for sale on aluminum hard top for an early flat fender Jeep. World War 2 era cj2a cj3a Jeep made by Allstate, Sears and Roebuck. Includes the doors, slides and back lift area. Just needs new plexi-glass and some minor straightening out of some of the panels. A hole in the top right passenger side is the worse spot.”
UPDATE: **SOLD** Was $800
Seller admits he doesn’t know what it is worth.
“I have a custom top for a willys jeep its an aluminum top with doors hard shell i dont lnow really how much to sell it for lets say $800 or make an offer i dont want it.”
Mitch has the following items for sale. No pics of the chassis just yet. $500 for the tub, $500 for the frame and axels, and $500 for the rest. Call him at 9546617279 or email mfgraf@gmail.com
“I have for sale a nice, solid, straight and rust free rolling chassis from a 1955 Jeep M38A-1. Included as part of the chassis are original Dana 44 & 25 axle assemblies with 5.38 gear ratios and open differentials, suspension, some steering linkage and good steel brake lines. The OEM wheels/tires are NOT INCLUDED so arrangements would need to be made. Also included is an original M38A-1 tub which has been media blasted and bare metal, (it is useable but requires repair primarily in the floor area), original T90/Spicer 18 transmission/transfer case assembly, T90/Spicer 20 transmission/transfer case assembly with SB Chevy transmission adapter, OEM M38A-1 driveshafts, nice early CJ-5 hood and grill.”
UPDATE: **SOLD** Was $850.
This Roper is different than others I’ve seen or documented. Maybe it was primarily sold to tractors?
“1940’s Roper Iron Works pto post hole digger for Willy’s Jeep or tractor in good condition. Appears to be complete and comes with auger, may have two others. Turns smooth and freely. Located about 30 miles north of Lake Havasu City”
UPDATE: **SOLD** Was $2750.
I’ve lost track of what these are worth.
“WWII Capstan Braden Winch setup for a jeep. It is a nice setup and is pretty much complete, the winch head turns fine. Some of the smaller parts have some wear, the u joints in the drive shaft will need work. Over all a good used setup.”
This looks like the Koenig standard hardtop with the vertical rear doors. Seems in great shape.
“Hard Top for Jeep
Brand : Koenig Iron Works , body division , Houston Texas
The design and build of this steel top is very hi quality.
-Roll up windows in doors
-sliding rear side windows
-stainless steel fasteners
-currently on a 1968 cj5
-will remove from my jeep when sold (currently on my jeep)”
http://minneapolis.craigslist.org/hnp/pts/5401939331.html
UPDATE: Still Available.
(12/06/2015) Mike spotted this one. It might be a good price.
“I have a willys jeep half cab. It came off a 61 willys jeep. It has all of the glass in it, and I have the doors for it. Asking $100 Obo.”
Front bumper weight.
“Up for sale is a rare front weight for a willys jeep no cracks breaks or welds have other jeep parts available”
Here’s a neat 3B hood.
“Brand new, never installed after market hood for Willys jeep high hood CJ3B”
Seth spotted this hard to find part.
“This is a used bilge pump and propeller shaft PTO for a Ford GPA Amphibious Jeep. If you are lucky enough to own a GPA you know how rare these are. Both levers shift in an out just fine. The levers have casting #’s of GPA 1548 and GPA 7248. The number on the housing is 7 38 1. Great item to have as a spare or if you are missing the PTO this is your chance to help complete your GPA. This PTO has been sitting on the shelf for over 40 years. Please look at the pictures to make sure this is what your looking for.”
UPDATE: **SOLD** Was $2000.
Has the M-38 indents, MB glove box, and some CJ features.
“CJ2A reproduction tub, complete floor plates, minor surface rust in one fender well never mounted has been in storage for several years, these are $2500 and up online”
**SOLD** Was $175.
Great vintage Koenig top. Looks in good shape for a good price.
“Jeep cap and two doors. Fits a 1957 willys jeep in good condition. $100 for the cap and $75 for the doors obro. ”
UPDATE: **SOLD** Was $250.
Looks solid. No sign of doors.
“have a half cab for an early willys CJ2A, CJ3A, or CJ3B. It’s also in good shape and all aluminum. $250”
UPDATE: **SOLD** Was $650.
“Jeep Willy’s Tailgate and Flare Side Bed 81.5″ X 48″ Purchased for my 1972 J2000 but found a Gladiator bed. Tailgate is in good condition with one larger dent on drivers side bottom. Bed will require metal work, rails and corners are showing rust through(see pictures). Tailgate original chains are intact and gate opens and closes.”
UPDATE: **SOLD** Was no price.
Seller has what appears to be a Jeep-a-trench PTO and gear. They are also selling a lift of some type.
“THIS IS A VERY RARE OPTION ON A 1954 WILLYS JEEP WE ARE RESTORING. IT IS A WAY TO GET THE FORWARD SPEED OF THE JEEP DOWN TO ABOUT 1 MILE PER HOUR.
STUDY THE PHOTO’S AND SEE THE FINE CONDITION THE PTO IS IN. THE BIG GEAR IS A REPLACEMENT EMERGENCY BRAKE DRUM SET UP SO IT CAN BE TURNED BY THE GEAR COMING OUT FROM THE PTO. THE BIG GEAR HAS A SMALL CRACK NEAR THE CENTER BUT IS NOT SERIOUS. IT IS VERY UNIQUE AND I THOUGHT I HAD SEEN EVERYTHING AVAILABLE FOR EARLY WILLYS JEEPS FROM THE 40’S.
THANKS FOR LOOKING AND YOU CAN WIN IT JUST TO HAVE ON YOUR SHOP WALL FOR SHOW AND TELL TO ALL YOUR WILLYS JEEP BUDDIES OR USE IT TO WIN THE SLOWEST VEHICLE AT YOUR HISTORICAL SOCIETY FESTIVAL RACE.
I JUST ADDED ANOTHER VIEW OF THE PTO DRIVER LISTED AND A FUTURE LISTING WE WILL DO FOR A WILLYS 3 POINT HITCH HYDRAULIC REAR L;IFT FOR EARLY JEEPS. VERY NICE.”
UPDATE: **SOLD** Was $50.
This is a good price. The seller also has this unusual winch at an inexpensive price and other parts.
“This counterweight was designed to fit on the front of a CJ3 Willys Jeep. It came off a 1950 vehicle. A trencher was mounted on the back and this counterweight was as a counterbalance. It weighs over 200 pounds.”