Wade has two military hardtops for sale along with an M-38 and a CJ tailgate.

He writes, The Hardtops I’m looking at $500 each. Negotiable. And the tailgates $75 for the M38 and it has hole on the bottom part but has been sandblasted, the CJ has hole and not sandblasted and $25 for it.

For $100 this looks like a good price for the right person.

“Need to get rid of all my spare parts before I move. Great deal for someone, everything for $100. Need to sell asap.

Some of the stuff includes engine block, tranny, two transfer cases, radiator, coil, rear drums and pads, brake springs, 2 fuel pumps, bell housing, exhaust, brake lines, fuel lines, steering column, drive shafts, and more.”

http://albany.craigslist.org/pts/5064468935.html

Good buy?

“hi – i have had this heavy duty radiator in my shed for a few years now and would like to sell it if theres anybody local enough that can pick it up in person.

thats why i priced it cheap at 100 bucks as i dont want to ship it at this point. its heavy. i had purchased this fc170 radiator from a forward control specialist in phoenix arizona who had it re-done previously for his v8 powered project and then used it for a while and then sold it to me when i needed it for my project.

think i paid 250 or 300 bucks for it — it is a 3 or a 4 row and fits the fc-170 trucks only i believe.
you can see on fan side of core where there was a small repair done where his electric fan rubbed a hole into it but was fixed and was supposed to be ready to use.

anyways , looking for 100 bucks and please come pick it up , also have a couple seats from another fc-170 truck that you can have for free. just come and get them – might fit fc150 too. ”

http://dallas.craigslist.org/ndf/pts/5063231274.html

UPDATE: **SOLD** Was $150.

“For sale is a vintage PTO1 Ramsey winch. According to my dad, it originally came off a 1951 CJ3A. He later installed it on his 1970 CJ5, perhaps with slight modification. It was working when removed over 30 years ago. Has been stored in the barn ever since, but we were just doing some cleaning and decided it’s doing no go to anyone there. It is being sold untested. Seems to be complete except we can’t find the one shift handle. I really don’t know much else about it, so I’m assuming and hoping that you do if you’re looking at it.

If you aren’t a buyer but think you know something worth sharing with me about this winch, it would be kind of you to do so. This includes the value, because we’re not too sure what it’s really worth to anyone.

Asking $150 or best offer. Keep in mind that “or best offer” could possibly mean either a smaller or a higher figure than the asking price!”

Doug spotted this post.

“Two Jeep or Willys side shift transmission housings.One housing has both shift levers and both forks.The other is a bare case.Asking $50 for the case with forks and levers and $35 for the bare case.Also have to fit the side shift t90,one NOS shift lever #642898 and four NOS shift forks#640378.Lever or forks $15 each.Cash only call before 8 pm.No text.Thank you.”

http://limaohio.craigslist.org/pts/5053722499.html

UPDATE: **SOLD** Were $25.

Someone must be interested in these.

“Jeep Renegade 2 Hood decals.Nos hood decals for 1971 Jeep renegade 2.One side of hood stripe is missing.Part number 985615.$25 cash only call before 8 pm.No text.Thank you.”

Chris is selling these hoods. The price looks good.

“I have various willys hoods from CJ2A’s CJ3B’s and CJ5’s. I will be in Toledo this coming weekend 5-30-15 picking up numeous parts and would like to sell as many of these hoods as possible. I do plan on keeping the Willy’s Wagon hoods in the pics provided. PLEASE NOTE:
THE GRILLES IN THE PICTURES ARE NOT FOR SALE, ONLY THE HOODS.
I am selling the hoods for $35 each hood. Please be aware you will have to pick these up on-site at location 562 South Reynolds Rd, Toledo OH 43615. Also, you will need to pick up between 9am and 12noon.”

http://toledo.craigslist.org/pts/5042899061.html

The price is right. Looks like it has some usable parts.

“Willys 134 CU (?) 4 cylinder F head engine out of 1961 FC150. Complete – not running – appears rebuildable.”

http://spokane.craigslist.org/pts/5034814010.html

No pics provided. Send seller an email and he’ll check on part availability.

“I have willys jeep pickup, wagon, CJ2a, FC-150, CJ5 parts for sale. I have Many parts so if you are looking for any parts e-mail me and I will check my inventory. I also have pics of the parts available.”

http://newjersey.craigslist.org/pts/5033867224.html

Never installed.

“New in box, box has been opened but top was never put on Jeep. Asking $700.00 O.B.O. Please call and leave a message and we will get back to you asap.

Kit includes doors, latches, bows and all necessary hardware. When folded, all hardware and the top stay together. Snaps are concealed on the top for a smooth look. In most cases, snap locations match factory-installed studs. Click-shut doors have twist style handles. Side and rear curtains roll up safari-style for maximum shade and ventilation. Adjustable foam-covered bows provide a skin-tight fit.”

http://northernwi.craigslist.org/pts/5028527785.html

Looks like there is value.

“PTO for 1946 Willies Jeep.”

http://chico.craigslist.org/pts/5017812346.html

UPDATE: **SOLD** Was $500.

(03/29/2015) Parts jeep.

“I have a 1946 Willys tub and front end for sale. It’s titled and fairly solid. Needs a passenger floor patched but it’s a great start for a flatrod or crawler build. I was planning on using it for a flatrod but I really have no time for it. A ford solid axle will be included with the tub. Not selling parts, take the whole thing. I have some low back seats I can throw in as well.”

UPDATE: **Status Unknown** Was $100.

“Artic aluminum too for Willys CJ2A jeep. It has sliding windows and doors.”

Looks like a good price.

“Hardtop and doors made by Koenig Iron Works made for most Willies Jeeps”

http://phoenix.craigslist.org/evl/pts/4997054409.html

UPDATE: **SOLD**

“Cleaning out barn loft. Numerous parts for 1948-51 Willys Jeep/ Jeepster/ Truck
3 front fenders (2 left and 1 right. 1 left has rust but repairable)
1 grille with headlight buckets
3 chrome bumpers
1 retractable roof frame
1 drivers door (bare, no hardware/ glass)
3 Seats (2 front 1 back, upholstery is in good condition)
4 seat cushions in gray upholstery
1 bare front seat frame and 1 bare back seat bottom frame
4 15in wheels
1 manifold w/ exhaust pipe
3 instrument/ gauge panels (all glass is good)
2 single barrel carbs
Driveline
8-9 new u joints in original boxes with needle bearings
1 windshield wiper motor
1 turn signal indicator w/ wiring harness
1 fuel pump
numerous trim pieces”

Doug has another batch of NOS parts for sale that eWillys readers get a first shot at buying.

“I have a 12 volt Delco Remy regulator,two different Warn hub service kits,a pcv valve,an odd small wire harness,a Willys neutral switch,couple of wiper knobs,upper and lower chaff screen clips,couple of clutch release bearing springs,and a fuel gauge with panel.
These were all in original packaging,I had to open them to get pics.
If interested,contact me at 419-721-3320 and I can send more pics,give you part numbers,etc.I am willing to ship in the continental U.S.”