UPDATE: **SOLD** Was $999.
Looks in good shape.
“sandblasted and primed,spins freely.very rare,rest of the parts are at www.capstanwinch.com”
UPDATE: **SOLD** Was $999.
Looks in good shape.
“sandblasted and primed,spins freely.very rare,rest of the parts are at www.capstanwinch.com”
Vintage set of 10 spline Warn hubs. Seller also has newer set for more money.
“I have two sets of Warn locking hubs. Both are for 10 spline axle shafts and six bolt flange mounting. They are compatible with many years of jeeps.
1. Plastic dial set is in perfect working order. They are also compatible with threaded axle shafts on early jeeps. No need to remove or cut off the shaft, they work with the nut installed. $50
2. Brass dial premium set (Warn part number 29062) are new in box, never installed. These are also compatible with all the same years of vehicles. If used on threaded axle shafts the threads will need to be cut off per Warn’s instructions. These retail for $210. I am selling them for $150.”
UPDATE: **SOLD** Was $250.
Looks like all the glass is there.
“Hi I have a used cj2a cab and doors. Came with my jeep but don’t have a need for them. Decent shape for age. ”
UPDATE: **SOLD** Brett spotted this parts source in Utah.
“WE HAVE LOTS OF WILLYS JEEP PARTS MOSTLY NOS OEM THAT HAVE BEEN STORED FOR YEARS……WE HAVE HOODS, FENDERS, WINDSHIELDS, BUMPERS, FRONT AND REAR SEAT FRAMES, GRILLES, WHEELS, 4 CYLINDER F-HEAD ENGINES, TRANSMISSIONS,TRANSFER CASES, AND MORE, TO FIT WILLYS MB, M-38, M38-A1, CJ-2A, CJ-3A, CJ-3B, CJ-5, CJ-6, FORD”
UPDATE: **SOLD** Was $800
“One jeep is a 1947 and one is a 1949 .. the big one is a 1947 cj2a complete minus engine, it has 39″ military tires on custom made 20″ wheels, the transmission and transfercase are in it, the jeep just needs an engine. The other willys jeep is a 1949 cj3a .. its only a body and frame.. THESE JEEPS HAVE NO ENGINES AND THEREFORE DO NOT RUN, THESE ARE OFF-ROAD MUD TOY OR TRAIL JEEP PROJECTS AND NOT WORTH RESTORING! THERES DENTS PLENTY RUST AND PREVIOUS REPAIRS ON THESE JEEPS..”
No pics provided.
“Willys Jeep parts for CJ2A- CJ3A- CJ3B, engines, axles, body parts, soft top+++”
No pics provided.
“I have several 4 and 6 cyl flatheads not stuck . Pretty complete but ever heard them run, , also have willys chassis,s wagons, trucks and cj3a , trans t cases and assorted parts let me know what you may need”
UPDATE: Pics now provided.
“M38 Willeys jeep canvas top with sides and doors with rods
Also top bow ,and 4 brackets with 2 thumb screws,mounting channel to windshield
All new ,will add pictures
1150.00 obo no reasonable offer refused, no lowballers or flakes. Shop around before you drive out. Cash only! Pick up in Apple Valley”
UPDATE: **SOLD** Was $150.
Glenn found these for sale.
“Selling one pair or Warn Summer Hubs for Willys Jeep. In case you do not know, these are a period accessory for the four wheel drive to disconnect the axle shafts at the hubs. They bolt on in place of the drive flanges. Selectable hubs have since replaced them.
They are virtually bang and nick free and do not have too much marring in the area where the bolt lock washers go. It looks as if they were bolted on once or so. They could be polished up to look new again in no time. They have the bearings in the back side but no original box. They are on a board of some sort with wood dowels to keep them placed. I am not sure if that is original to them.”
UPDATE: **SOLD**
SER.#110768, Date of Delivery 1-13-42
INCLUDES THE FOLLOWING:
Caution Plate, Name Plate, Frame Tag(number matches name plate), Frame, Axles, Springs, Trasmission, Transfer Case, E-Brake, Skid Plate, Cross Member, Both Propeller Shafts, Complete Steering, Both Rear Shocks, Master Cylinder, Both Pedals, Support Bracket, Slat Grill, Both Blackout Headlights, One Solid Wheel.
Frame has some rot and cuts. All of Bubba’s work removed. Everything preasure washed. Some OD paint present. It is inside. No Title.
Include your name and phone number in any responce and I will contact you. If this add is up it is still for sale.
UPDATE: **SOLD** Was $950.
Rare Vic Hickey head for sale.
“From off road pioneer Vic Hickey, very rare high compression finned aluminum head for 1939 and up Willys L134 engine – Kaiser, Jeep/Jeepster/Henry J./Allstate. This has one enlarged plug hole and needs a threaded insert but is otherwise in fine original shape with minimal sign of electrolysis around water neck flange but very clean head surface and combustion chambers – absolutely usable as is. This is a very rare period performance upgrade for your Willys L134 powered pride and joy. I have not seen a Hickey head for sale in many, many years. Do not miss this one!”
Looks like some value here.
“Tub, tailgate, fenders, hood, transfer case spicer, manual tranny, axles, come get it asap. Moving out 250$ takes it all. ”
UPDATE: **SOLD** Was $500.
(02/18/2015) Hard to find Kayline tops, let alone unused ones.
“I have a brand new Kayline soft top and doors for what I believe is a cj2a willys. The top is tan and is in mint condition. Also have some of the hardware that goes with it that is also brand new”
The body has a metal dash added to it.
“Fiberglass tub with metal dash, metal fenders, hood, grill, windshield frame, all in good shape, also a set of tires and wheels that are good for rollers.”
UPDATE: **SOLD** Was $270.
I can’t tell if this fits CJ-5/6 or CJ-2a/3a.
“Willys Jeep roof and behind the seats enclosure is a little rusty but in usable condition or could be restored. Other sheet metal parts available.”
Old stock glass.
“Willys Glass Vintage Truck & Wagon
Recently Acquired 60 pieces of 40’s through 60’s old stock glass.
Windshield two piece Split only.
Wing none.
Doors.
Cargo Sliders & Stationary.
Cargo curved.
Cargo rear hatch.
Cab back truck none right now
Price @ twenty five to 55 per size & condition.
Prefer phone call will reply to emails with request for phone calls.”
Ted posted these Monroe 3 Point parts on eBay. View all the information on eBay
1. Monroe 3 Point View all the information on eBay
2. Monroe 3 Point Arms View all the information on eBay
Mike has these parts left over from a project he just completed.
“Left over parts from a Willys Jeep rebuild. Parts include: two 6V windshield wiper motors, M151 speedo meter gear kit (new), steering wheel, air cleaner passover tube, fan belt pulleys, 6V cigarette lighter, distributor for 225/231 6 cylinder Buick engine with wires, 2 distributor caps, speedometer gear, flywheel, hood clamps, ammeters,fuel gauge(6V and 12V),12V Accel coil, brake cylinder (needs rebuilt), other misc stuff also.
Call for individual prices or take all for $250.”
UPDATE: **SOLD**
Seller has a variety of parts.
“T-1 air compressor for military willys jeeps, Has the motor mount with it . Many other old willys jeep accesories like post hole digger, capstan winch, koenig winch, cj2a rare parts, middle seat for cj5 interested email or call I might the piece you are looking for. many rare willys jeep parts for sale”
UPDATE: **Status Unknown**
“Willys Overland Truck, Wagon parts 1950 – 60’s.
Picture are of parts stored on open shelving not intended to represent all available.
I also have body parts listed on Craig’s.
A 1950 Willys Wagon, running project & a 1948 Willy Truck, restoration project are also listed.
Parts are old stock, some will fit pre-1950 trucks wagons, jesters, cj’s, primary exceptions are fenders, grill, & lighting parts.
Parts came from dry Central OR. sources.
Parts acquired with other jeeps, off parts trucks, or separately, some from project replacements.
Parts priced on sight are negotiable per condition, haggling expected.
Prefer phone call will reply to emails.
Items deleted if not available”
UPDATE: **SOLD** Was $500.
This model 330 has the vertical rear doors.
“Original hard top and doors for 1948ish Willy’s Jeep. Very straight good condition.”
UPDATE: Was $185. **SOLD**
Looks in good shape.
“1950/52 Willy’s flat fender jeep hood.
Raised design for air filter clearance. Silver color. Fiberglass. Front latches not included. Hood ONLY.”
It needs some work.
“Monroe 3 point hitch with reservoir and lines. The hydraulic housing is cut but can be repaired by an experienced welder. The cylinder, lines & reservoir all were full of oil and move freely.”
UPDATE: **SOLD** Was $450.
These are rechromed bumpers that Dan spotted. I’m sure someone could use them.
“All pieces have new chrome, brackets have been blasted & have fresh paint-
Rare embossed “Willys logo”-
Excellent condition!!-”
UPDATE: **SOLD** Was Make Offer.
Looks like a DJ top.
“I am selling the hard top off of my CJ2A. Generally in good condition, however could use a paint job. Make me an offer.”