UPDATE: **SOLD** Was $250.
Might be a good price.
“Have a old metal top for a willys it came of a 52 m 38 it might fit other willys models not sure on that”
UPDATE: **SOLD** Was $250.
Might be a good price.
“Have a old metal top for a willys it came of a 52 m 38 it might fit other willys models not sure on that”
Lee’s got this M-38 Grille and light assemblies for sale.
“Jeep 1952 M 38 grill with head light assembly
condition very good”
UPDATE: **SOLD** Was $250.
Looks like a good price.
“Saling aluminum top for 1940s to mid 60s Willys Jeep aluminum top with doors very rare Top250 or best offer thanks for your time jeep not for sale…”
Includes doors.
“WILLYS JEEP CJ2A CJ3A KEMCO HARD TOP WITH DOORS CHEAP
FITS FLAT FENDER JEEPS
ARMY MILITARY MB GPW CJ2A CJ3A
SOLID NO RUST / ROT HOLES
JUST FLAKING PAINT
BOLTS ON
DOORS HAVE ROLL UP WINDOWS”
UPDATE: **SOLD** Was on eBay.
“Up for bids is a pretty rare Koenig Model 58 PTO that came off of a Dana 18 transfer case on a CJ. This PTO originally had dual shifters to control the front and rear outputs on it, and has been converted to be operated with a pair of cables. I do not have the shifters for it, but should be easy to fabricate, or find a set for it if you want to go that route. We bought this to install onto our Willys wagon, but after more research, this PTO is at a greater angle drop and was originally made for the CJ5. The outputs work like they are supposed to when turned by hand and shift each lever by hand.”
UPDATE: **SOLD** Was No Price.
Mark listed this Capstan Winch for sale at Jeeptruck.com
“I believe its from a CJ2A Jeep and looks to be incomplete.”
No pics provided.
“I ended up selling the truck before I replaced the floor pans. Both sides included.”
M-38A1 Chassis? There should be some value in this free chassis.
“Willys military jeep chassis 4×4 wheels and tires. No paper work. Free 294 Erlach Drive Crestline Ca 92325. Parked out in front, haul away, free! Differentials and axles are in place.”
UPDATE: **SOLD** Was $650.
“This is a complete L-Head 134 cubic inch flat head 4-cylinder “Go Devil” engine. Fits M-38, MB, and CJ-2A, CJ-3A. Should also fit a GPW. It was a military engine, rebuilt in 1953 by 229th Ordinance Base Depot, TEWOS (Plate attached). Turns over easily. The block is good with no cracks, but the cylinder walls are pitted.
This engine is complete with carburetor, oil filter housing, air cleaner, fan, distributor, manifolds, crossover tube, carburetor linkages, etc. I may be willing to sell separate parts off this engine if no one is interested in the complete package. Also, I would be willing to strip the extra parts off the engine if someone only needs the block. My asking price will be adjusted depending on what parts you need. Please email me (via Craigslist) with questions or requests.
I have many other Willys parts, such as Dualmatic lock-out hubs, CJ-2A soft top plus frame (rare white, like new), CJ-2A or 3A soft doors, 6-volt generators and starters, etc. Send me an email if you need any flatfender Jeep parts.
Historical note: The 229th Ordnance was based in 1952 and 1953 at Tomioka, Japan, between Yokohama and Yokosuka on the main road. This engine is a Korean War veteran, and would be ideal for an authentic M-38 restoration. “
UPDATE: **SOLD** Was $350.
“This ad is for the bed extender and braces only. Jeep and tailgate are not included.
Add cargo space to your old CJ! Shown on a 1967 CJ5.
Will fit tailgate opening 36″.
Dimensions 36″ wide X 24″ long X 14″ high. All rust is surface only, there are no thin spots in the metal.
Compare prices and conditions here: http://www.ewillys.com/?s=bed+extender
Some original product info here: http://cj3b.info/Tech/BodyExtension.html
UPDATE: **SOLD**
Need a top and never visited Victoria, BC? Well, this is the opportunity for you! It’s scary to believe that it’s been two decades since I’ve been there, but back then it was a beautiful city (I’m assured it hasn’t changed too much).
“Have 4 tin tops for sale. 3 are complete with brackets and hinges, the other one is just missing brackets, all have glass and working tailgate windows. All have full doors with roll up windows. Both early and later CJ5 models and some MB series. Condition ranges from good to needs some metal work. Open to offers and JEEP trades of any kind. Looking for some half doors for a JEEP YJ and a utility trailer.
Price: $ OBO
City: Victoria
State/Provine: BC”
Looks in good shape.
“9 pc Hard Top Kit. Fits my 1951 Willys. Never been put together. Has glass back window and glass door windows.”
Need cleaning, but may be a good price.
“I have a set of Dualmatic locking hubs off early Willys Jeep. They fit 10 spline axle shafts. $50 each.”
Here are several hardtop links I found:
CJ-3A/CJ-5 Seattle: http://seattle.craigslist.org/see/pts/4602423760.html
2 CJ-5 Hardtops San Diego: http://sandiego.craigslist.org/csd/pts/4605784574.html
M-38 Arctice Top Michigan: http://up.craigslist.org/pts/4602598324.html
CJ-3B Hardtop Ohio: http://columbus.craigslist.org/pts/4569983165.html
There’s a 2A or 3A top in Montana, but I forgot to snag the link. Comment below and I’ll locate it if necessary.
UPDATE: **SOLD* was $250
(04/04/2014) It’s not in perfect shape, but has potential.
“For sale a Porter & Reed all aluminum hardtop off a 1948 Willys Jeep CJ2A. Complete with hinged gullwing doors and rear door. Excellent condition (plexiglass could use updating). This was a winter top and the Jeep sold without it.”
UPDATE: **Status Unknown** Was $600
“This 1942 0r 43 frame is waiting for you.
for as old as it is it is all in great condition.
will not show after dark.”
Ted’s got a huge collection of PTO parts and more for sale. You can reach him at:
860-428-3265 or
willysted@charter.net
I have a very large collection of items for sale if anyone is interested in certain items feel free to email or call with your needs or items your looking for . If anyone is looking to add a large collection of stuff to there inventory I would be open to offers on my entire collection ,alot of it is not pictured as it was too heavy to be moving around !!!
Some of whats included is as follows
Dual wheel adapters
excellent set of original side steps
Complete Monarch Governor
Novi Governor
Excellent condition Pierce industrial Governor
About two dozen single stick rear out put PTOs Spicer , Ramsey ,and even a super rare Koenig model
Right angle belt drive Drum Pulleys
Right angle belt drive (minus the drum)
Rear gearbox out put shafts 5 or so
A few PTO drive shafts 4 atleast
Monarch HY-LO Jeep plow pump and reservoir units 8 to choose from
Tons of misc Willys Jeep factory approved plow parts and components
Very rare Hornet Willys Jeep compressor head
2A windshield frame ,very good condition
Atleast 6 PTO driven winches (sorry no Ramsey model 50s for you m38guys)
One koenig king winch
one very rare Ramsey front mounted Crank Shaft driven winch complete with everything needed
Also have a completely restored Koenig brand steal half cab in excellent condition w/ period correct locking handles
there is a factory model 27 power lock unit there and I have a model 44 rear with 5:38 gears also with a factory power lock
Ted’s got 2 M-170 Stretchers sale. Contact him at willysted @ charter.net.
2 M-170 Stretchers $100 Each or $150 for the pair:
“I have some interesting left over military ambulance stretchers I would like to sell.They are in excellent condition and would be a great addition to someone restoring an M170 or even a m38.”
This is worth a look.
“hard top off a 1953 CJ3B willys jeep.. call if you would like more pics. very solid! windows intact!”
UPDATE: Price dropped to $1700
(02/14/2014) The seller has a variety of parts.
“Hi, I’m looking to sell my 1948 Willy’s cj2a jeep project. It is all original and in need of some work. It has all the parts except a battery, I even have metal for the bodywork. It needs body work including floors, assembly, and the frame needs to be fixed in a spot.
I, also have lots of extra parts, a plow and everything to use it, and a set of 1948 license plates.
It doesn’t have a title because it’s so old, but it comes with a bill of sale.
I’m not really in a rush to get rid of it, I don’t really have interest in it anymore and I’d like to get something that has some more power. I am interested in trading for an El Camino, Ranchero, Brat, Rampage, old Dakota, muscle car, or maybe something else let me know, or just cash.”
UPDATE: **SOLD** Was $20.
“I just pulled these off of my Willys ’51 CJ3A Jeep.
They worked before I removed them.
Sold by Sears MANY years ago under the name Allstate.
They are built like a vault. They don’t make them like these anymore.
These could be a neat addition to a period-correct Jeep restoration!
Not pretty right now but media blast and detail them and they’ll probably clean up REALLY nice.
$20 cash
It’s up to you to insure these fit your Jeep.
NO returns or refunds.
Best I can tell (no guarantees!), these can fit:
10 spline early front axle Jeeps including:
1971-older CJ
66-71 Jeepster and Commando
1973-prior Gladiator, Wagoneer and pickup
1965-prior Pickup and Wagon”
No pics provided.
“I have a 41-45 willys mb jeep tub, I was going to build a rat rod out of it but another project came along and would like to just get rid of it. Make offer.”
UPDATE: **SOLD** Was $150.
Looks like a good price on a 3B Hardtop.
“Koenig full cab with doors and windshield that fits a Willys CJ3B jeep. Cab has really solid and straight sides and top. The back window is ruff with rust and bent. The doors are solid and straight as well. They have roll up windows that are in great shape. The windshield is solid and straight but does have a 1 inch hole drilled in the top skin. “
Lots of work completed, but not all original.
“Completely restored…excellent condition…new brakes…new real springs…motor has just been completely gone over by a registered mechanic….runs great…. New rhino liner inside of Jeep..
Tires are in excellent condition….new gaskets in motor…NO LEAKS…… New bikini top….
4 wheel drive…transmission manual….”
UPDATE: **SOLD** Was $2800.
“1957 Jeep FC (Forward Control) project that I do not have time to finish and need the space. I have two chassis, one in the process of being put back together and the other untouched,. There is one cab and one bed, two engines (one rebuilt) Also included are all of the parts that came off both vehicles. 3 dana 40 axles, 1 dana 30.
I will not respond to request for my email and no more text scams!
Since I have not been able to sell as a project, I will part it out. let me know what you need and lets make a deal. Will also consider trades for something cool?”