These are very early hubs.
“these came off my 51 wagon.. last owner cleaned/painted them but time for a redo. good condition”
These are very early hubs.
“these came off my 51 wagon.. last owner cleaned/painted them but time for a redo. good condition”
Abe shared with me the following story: “While driving thru Vermont this past summer I ran across these jeeps sitting in some very tall grass. Asked for permission to take the pics on cell phone. Ergo lousy quality.”
Not only did Abe take pictures, but he got the owner’s business card, too. And, on the card, is a website: http://www.nejeeps.com So, thanks to Abe, maybe the folks in the Northeast have another resource for old jeeps and parts.
Here are Abe’s pics:
The CJ-2A below was built by a student from the local High School under Wayne’s supervision:
No pics provided.
“Excellant condition rear PTO with 8 inch flatbelt drive includes spicer transmission adapter, drive shaft, rear gear box, and belt drive attachment. All good no broken castings. Call anytime 2o7 59O 617O ask for Larry. No trades need cash.”
Steve spotted this clock. Someone has one of these listed for $799 on eBay.
“New Jeepster clock still in Jeep box. Doesn’t have a mounting base.”
UPDATE: **SOLD** Was $900.
“Top doors and lift gate 1960’s but I have it on a 1981 you just need the windshield frame from the early style jeep,which I also have for another $100”
UPDATE: Status Unknown. Was on eBay.
There were a few different people looking for replacement seat covers like these.
“e are offering a restoration quality canvas front seat cushion set for your MB/GPW. This set includes the back and bottom for one seat along with the mounting hardware. This is a direct high density foam rubber replacement for the original spring and padding. These are produced by our canvas division and made from military specification canvas. The picture is an example of the seat only and the seat frame shown in the picture is not included.”
They aren’t perfect.
” I have 2 complete sets of Dualmatic 6 bolt 10 spline locking hubs, tall versions. These will fit all 10 spline willys jeeps cj’s mb gpw’s wagon trucks and jeepster’s.
The set on the left has damage to the housing and one star gear. It has torrington needle bearings and is complete
The set on the right works but has small hairline cracks in the housing around the star gear, this set is also complete no other damage besides cracks.
Both sets have flat tops with no warping or over tightening.
Great for parts or restoration.”
UPDATE: **SOLD** Was on eBay.
Here’s a PTO.
“What I have for sale is a rear PTO gear box off of a 1951 Willys CJ-3A. It was removed when we decided to restore the jeep and the owner did not want to put it back on. The gearbox worked fine and all the bearings are tight. As you can see by the pictures it does not include the flange that connects it to the driveshaft. The flange was froze onto the shaft and had to be cut off in order to remove the gearbox from the frame. When I cut the flange off I did manage to cut into the shaft slightly as you can see from one of the pictures. This will not hurt the function of the shaft.
The driveshaft and the transfer case adapter actuator are listed separately. Check my other auctions.”
UPDATE: **SOLD** Was on eBay.
This is pretty cool.
“Original US WWII Curtain Fastener Set, in its original OD steel box, with GI tools, and thousands of its 1940s solid brass, oxidized bronze-finished mil-spec fasteners still within. Multi-compartmented box measures 3″ x 16 1/4″ x 25”, with hinged lid fastened by two spring catches. Two steel wire carrying handles–one on each size–complete the container. The lid is silscreened in orange with photographs of each fastener included in the set, each captioned with its federal serial number. Also depicted are the included tools, only some of which remain. The nomenclature stamp for the entire rig reads: “Curtain Fastener Kit / No. 4835 / FSN-42-K-6000 / Manufactured by United Carr Fastener Corp., Cambridge, Mass., USA.” (Carr manufactured the vast majority of the incredible array of fasteners used on all US GI gear.) Box lid is also stenciled with: “42-K-6000” in one-inch black figures and letter. Amongst the contents which remain in this amazing box are: Lift-the-Dot, Large; Lift-the-Dot, Small; a variety of different male halves for both types of LtD; Baby Durable; Large Durable; grommet (in several sizes; and an array of hardware types I cannot identify. All fasteners are NOS, original to the box. I can only assume the “curtain” in the ensemble’s title refers to that portion of the MB/GPW’s fabric top–but there are certainly many fasteners included in this set which were intended for use on seats, straps, etc. There’s thirty pounds of hardware here, and our opening bid wouldn’t cover today’s cost of purchasing the equivalent number of cheap, modern, imported fasteners. This set was surplused out of the US Army’s Pueblo Ordnance Depot in Colorado in the 1970s–which might explain its scarcity (if these were only issued at the depot level, there just weren’t that many). In over forty years of collecting, I’ve never seen another like this extraordinary assemblage, and have only even heard of one other.”
UPDATE: These were listed on eBay in 2012.
Hublock hubs appear to have been made by Dana-Spicer.
“This is an original pair of vintage lock out hubs. These are made by HUB LOK. I am not sure if these were Sears, Spicer, Dana, ACME or whatever. They work just fine. They fit the Dana 25 front axles. These fit the MB, GPW, CJ2A, CJ3A, M38, M38A1, CJ3B, and early Cj5. They need a good cleaning.”
No pics, but I imagine these engines aren’t too common?
“Army mule engine. Four cylinder air cooled Willys apposed. Was used on the Vietnam era Army Mule that was used to haul a big recoiless gun into the countryside. The Mule was an all wheel drive vehicle one driver seat.
It has the clutch and pressure plate. Home made electric starter and hand cranked. The original vehicle has the starter on the transmission and that is missing.
Runs excellent.
Phone 256 268 2327 – 256 493 0450”
http://bham.craigslist.org/pts/3499766183.html
These are nice to have.
“This is a new very correct and high quality pair of reproduction thumb screws. These are for mounting the windshield to the cowl brackets. THese have the correct long sholders so the main windshield frame can pivot freeley up and down. These are cast iron just like the originals. These were originally used on the MB and GPW WWII jeeps but will fit the CJ2A, CJ3A, Cj3B, and M38 as well. Excellent items for your jeep restoration. QTM”
UPDATE: **SOLD** Was $650
This comes with the HY-LO-JEEP pump.
“Snow plow with w/ hydraulic pump and controls for CJ2 A Willys Jeep. Blade is 6 1/2 feet. Pump, hydraulic controls, and chassis attachments still mounted. Blade is heavy duty. Buyer can assist in removal of pump and controls to learn how pump and controls are mounted.”
Hubcap Annie from Denver, Colorado, is selling her rare Antique Grease Cap & Hub Cap Collection.
“Annie is finally hanging up the rubber mallet!!!! World famous “Hub Cap Annie’s” private collection in Denver, CO, of rare grease caps (500), center caps (80) and full wheel covers (25) from the 1800s to early 1900s are being sold. The collection is 60% American manufacture (400 caps) and 40% foreign manufacture (200 caps), all are O.E.M. Metal compositions include bronze, pewter, chrome and burnished brass. Manufacturers include: La Salle, Ford, Whippet, Houk Wire Wheel Corporation- Buffalo, NY, Kaiser, Ford, Jaguar, Fiat, Rolls, Mercedes, International, Willy’s, Willy’s-Knight, Saxon, Nash, Packard, Whippet, Durant, Studebaker, REO, Overland, Chrysler, Ford, Stutz and many, many more! For more photographs detailing the physical condition of the collection, please visit the “Hub Cap Annie” website at:
http://www.rare-antique-hubcap-collection-for-sale.com
Interested buyers may also purchase the “Hub Cap Annie” Federal Trade Mark (registered until 2022, and renewable for perpetuity). Start your own Hub Cap Annie (and Wheel) Store, Sports Bar, Restaurant, Boutique, Museum Collection and/or Auto Memorabilia Retail-Online Outlet!!!
FOR MORE INFORMATION ABOUT HUB CAP ANNIE’S COLLECTION, GO TO: www.rare-antique-hubcap-collection-for-sale.com or call Annie (a.k.a. Jane) at (303) 365-9711.”
Walter spotted this. No pics provided.
“hard top for willis jeep comes with doors in real good condition can send pics if interested”
http://winstonsalem.craigslist.org/pts/3446904276.html
Walter spotted this one. Probably for a CJ-5.
“nice seat 50 obo”
http://asheville.craigslist.org/pts/3421057403.html
Randy spotted this rare warn hub box. It needs another hub though. Northstar Willys is auctioning this.
“This auction is for one Warn hub cap with the original case.”
UPDATE: **SOLD** Was Make Offer. Kelly Hardtop and Sears Deluxe
Kyle has these for sale.
“Came with my m38 but has 2a windshield frame. white top steel. Nice shape
Red top came with cj2a no window and little bends here and there. Aluminum
will trade for willys jeep parts. Need soft top for m38 especially”
UPDATE: **SOLD** Was $500.
This appears in good shape.
“Nice hardtop cab for 48 Willys Jeep. Just the thing to keep you warm when you are plowing snow”
The seller can’t find the shifter.
“Ramsey Model 18H PTO for Jeep Dana 18 transfer case . . . I have misplaced the shift lever and retainer (still looking though and believe they could be easily fabricated if necessary). Per photo, this is rear output only.
In person, cash sale only. If ad is still up, this is still for sale.”
http://baltimore.craigslist.org/pts/3448833257.html
UPDATE: As of 2022, the building appears to still be there, but it is closed.
Jim wrote to tell me a little about Bruce Wadlin and his Florida 4 Wheel Drive & Truck shop. The sixty-nine year old Bruce runs the shop himself, selling “OBSOLETE JEEP & Willys Parts”. Jim grew up with him and said that Bruce has been buying and selling new (old) parts since the 1970s. Bruce is pretty old school, still using only a phone or fax machine. He doesn’t even advertise. So, Jim thought he would place ads on Craigslist and contact eWillys.
The shop is located at 6110 17th Street E, Bradenton, FL. The phone number is (941) 756-7844. Bruce generally keeps hours from keeping hours from 11am until 5PM daily (though the ad says noon to 6pm).
Choose between several different tops.
“I have 3 hardtops ,one is a military arctic top,the other two are civilian tops.call for prices,ph no 507 685 4418 no emails please”
http://minneapolis.craigslist.org/dak/cto/3441845003.html
The seller lists this in Denver, but appears to be from Iowa. **SOLD**
“I have a Kayline soft top to fit a CJ3A, no bows or doors, just the top with windows. I purchased this in the mid 90s and only had it on the Jeep for about two weeks and its been packed up in the original box ever since, these were nice tops and Im not for sure if you can still buy parts for them or not. If interested shoot me an email. working on a pic soon”
I couldn’t say if all the parts are there or not.
“Here is a plow off an early 40’s willys jeep. Brackets, pump, frame, and plow. Its all there, ready to bolt on!! $225. Call 518-321-3483 evenings or 518-744-8740 days.”
No pics provided.
“I HAVE A LOT OF MISCELLANOUS PARTS FOR JEEP WILLYS, ACE AERO, JEEPSTER, WAGON AND TRUCK THAT I AM SELLING. INCLUDING TUBS, WHEELS
GIVE ME A CALL I BET I HAVE THE PART YOU ARE LOOKING FOR. i ALSO HAVE CARS FOR SALE.
I WILL TRADE
ASK FOR NETO
661-916-8511”