Mark just listed this at jeeptruck.com
Parts Research Archives
Unusual Half Cab for sale Lander, WY $1000
UPDATE: Steve sent some more pictures. This is interesting.
Steve had this half cab for sale. It appears to be a CJ-5/CJ-6 model.
Steve writes, “I have this old half top looks like protype of some short. It is not really homemade. It has cut outs for the early rollout windows and a sticker of some kind just under the back window…..would like to sell it … its located in Lander, WY, for $1000. my phone number 307-850-2890.”
1952 CJ-3A Plainville, CT **SOLD**
UPDATE: **SOLD** Was $200.
That frame is thin in a few plates.
“52 willys frame with axles and wheels. Rear of the frame is getting a little thin. One spot of rot is shown in the pictures. Has a plow frame attached. The front bumper is coated in rubber. Looks like it could have been an aftermarket plow kit”
Old Willys/Jeep Parts Crawford, CO
No pics provided.
“Old willys military and civilian jeep parts for sale. CJ5 hoods, grills, front fenders, gas tank roll bars and more. Also have willys pickup/ wagon hood front fender and door. Going in the Army so everything needs to go call (970-210-0680) for more info.”
Can of Willys Anti-Freeze
Here’s a rare can of Antifreeze for auction on eBay
“WOW! WOW! WOW! Up for bids is a super rare WILLY’S MOTORS ANTI-FREEZE Can. This beauty is a 1 quart can and has had the lid removed. This would be a great addition to any oil or Jeep collection! Feel free to email me with any questions!”
Dually Adapters Boise, ID **SOLD**
UPDATE: **SOLD** Was on eBay.
“I’m not sure of the exact age of this set but they did come off a WW2 GPW. I have heard that dual wheel adapters may have been used during WW2 particularly on radio jeeps but I have not personally seen photos or documents to substantiate this. I do have a Korean War era photo from the National Archives that does show duals on a GPW/MB. (photo above in slide show)
The dual wheel kit is very easy to install. Remove the original lug nuts from a wheel, leave the wheel on, install extended lug nuts, install the cast hub, install next wheel, and tighten up original lug nuts on extended lug nuts.
The kit includes both left (5) and right (5) threaded extended lug nuts and two cast hubs.
These dual adapters are in good usable shape; there are a couple chips out in the lips of each casting but these chips do not affect use or appearance. They are not visible with the second wheel installed.
These Dual wheel adapters are extremely hard to find so don’t miss this rare opportunity to put this ready to go set on your jeep. You’ll be sure to stand out in the crowd and these can be shipped world wide.”
PTO and Winch Denver, CO **SOLD**
UPDATE: **SOLD** Was $300.
“Koenig PTO winch, pto, driveshaft and frame for winch from 1957 CJ3B Jeep.”
Military Jeep Radios? on eBay
I have no idea what the value of these are or whether they were ever used in a jeep. But, thought I’d throw them up tonight.
“antique radios, condition unknown…will 250.00…if interested or for more info please call 865-258-3571 or 865-966-3566 and leave a message…”
CJ-3A Aluminum Top Bozeman, MT **SOLD**
UPDATE: **SOLD** Was $20.
Not a perfect Sears / Meyers hardtop, but a great price.
“Jeep topper with doors. Came off a CJ3 Willies Jeep. 4zero6-5nine9 two87three”
Wanted: Some Wagon Parts in Puerto Rico
Hector lives in Puerto Rico and wrote to me that he needs some parts. He writes, “i need one arm rest, two door looks and two latches, for a 1961 willys truck.” You can contact Hector at: hectormanuel16 at hotmail.com
Willys Service Heavy Duty Steering Knob on eBay
This is a brand new item with free shipping. I looked for interesting knobs when I built Biscuit, but eventually settled for a tractor one. The seller has a variety of branded knobs also: http://stores.ebay.com/LOST-IN-THE-50S
“For years, I have had bidders ask me about a suicide steering wheel knob that would be good for real heavy duty use on trucks, fork-lifts, tractors riding lawnmowers and will work for handicapped drivers.
WELL I finally found one that will fit the bill for all of these uses and more. This top quality steering wheel knob is constructed from heavy-duty aluminum and steel. Ball bearings give it a smooth turning action and the tough mounting brackets provide a very strong hold on the steering wheel when installed properly.”
Hardtop & Softtop Kelso, WA Make Offer
I can’t tell if these is for a CJ-2A or CJ-3A.
“I have a Willys Jeep hard top and soft top. obo trade. Give me a call 360 747 1025”
http://portland.craigslist.org/clk/cto/3267563855.html
Various Parts in Issaquah, WA
“CJ3B, CJ5 F-134 Huricane four cylinder overhead valve head with rockers(good conditon) $50. 4 nice (no tires) & 2 OK (w/ tires), 5 bolt jeep wheels 15″ spoke wheels, 12″ wide I think $150 all, CJ2A and earlier windsheild frame, no glass, crusty, but useable $50, Nice CJ2A grill w/ headlights & bezels, with turnsignals $50, Early jeep locking hubs (old style) fits Dana 25, ’41 to ’64 $50. CJ2A brake drums (1) rear $25, CJ2A heater $50, Early CJ2A tub, prettty straight, some rust, solid and useable $250. These are the only parts I have for sale. Cash (resonable offer) or………….. trade for / (also looking to buy): 1941-45 Jeep, MB-GPW (Willys/ Ford) parts or project, Dana 18/25/27 parts, T-84 transmission parts, F-134 flat head parts, MB-CJ2A radiator, good MB-GPW Hood, CJ2A parts. or project.
Please e-mail, thanks..”
Soft Top for CJ-3A Townville, PA $200
No pics provided. Might be a deal.
“For Sale: Soft top for CJ3 with all hardware. Top is in good condition. Call 814-967-3199”
1968 Montgomery Ward Replacement Parts Book on eBay
Did you know that both Sears and Montgomery Ward companies both sold replacement parts for jeeps and scouts? See the next post for the Sears version of this catalog.
1968 Sears Catalog of Replacement Parts on eBay
Here is the Sears version of a parts Catalog, though this doesn’t mention any Scout parts like the Montgomery Ward Catalog does.
CJ-2A/3A Parts Kansas City, MO
“whole engines – three that turn over freely. One was running 2-3 years ago, and I know its a good engine – $500. Other two turn freely, but I lack the setup to start them up. those are $300.
starters – 6 and 12 volt, various styles
water pumps, oil filter housings, distributors, oil pumps, headlights, generators….
CJ grills – pics below, good condition $100 each
Hood – $75
gas tank – $100
radiators – $150 each
T90 transmission and transfer case – $150
Frame and axles – complete rolling chassis – $400
Windshields in poor to moderate shape – $50 each, must buy both.
get started on your jeep project or find parts you hate to pay shipping for, locally!”
Newgren Lift Frame Greensboro, NC **SOLD**
UPDATE: **SOLD** Was $125.
I have no idea what the value of a Newgren frame is. The seller has a pump, too.
“I have the frame for a Newgren lift used on Willys jeeps till the 1970’s. It is the frame that bolts to the frame of the Jeep. I don’t have the lift arms but I do have a hydraulic pump that will work with it.”
Bed Extension Hot Springs, AR **SOLD**
UPDATE: **SOLD** Was $75
This appears to be missing the support bars. It also doesn’t have the spare wheel carrier that some have. It’s a great price though.
“This is a bed extender for made for Willys CJ5 Jeeps (55-65models???) ”
Early PTO Drum on eBay
This auction will soon be over.
“For auction is NOS jeep rear PTO drum drive for a CJ2A, CJ3A, CJ3B, CJ5 in unused condition complete with small cloth bag containing (4) mounting bolts. This I believe is the early version with the pressed paper drum, NOT the metal type. This item is very heavy (48 lbs) packaged, box measures 16″long, 10″ high, 10″ wide.”
Hardtop Milton-Freewater, Or $700
UPDATE: Still Available
(03/16/2012) This looks in pretty good shape.
“I have this great old Hardtop from an early low-hood willys CJ/ MB. Doors, Windshield, and top all in good condition, but will need restoration. Some glass is broken, but easy to replace as it is flat. I had it on my 47 CJ-2A, but have decided to go w/ a soft top only from now on. I never use my Jeep in the winter! This is an insulated top. Check out the pics, and give me a call. I will answer any questions I can. I will consider trades…bikes, guns, tools, guy stuff. (509)876-2354.”
Myers Half Cab Carmichael, PA **SOLD**
UPDATE: **SOLD** Was $350.
“Myers Half Cab in excellent condition with no dings or dents. It has been wet sanded and is ready for paint or polishing. It came off of a CJ3b, but should fit some earlier models as well. Asking $350.00”
1947 CJ-2A Era, TX $500
The seller notes this is ‘almost a complete Jeep’. lol.
“Almost complete jeep: motor, transmission, frame, transfer case, axels, steering, radiator, carburetor, etc. NO TITLE; NO BODY. Call Clint: 940-768-9925”
Ramsey PTO Oakland, MD $200
This looks like a good price.
“I have a Willys PTO ( just the PTO ) for a Willys Jeep. It is in very good shape. It has the pto that has one shaft out to the back. Asking $200 obo Located in Oakland,Md. 21550 call 304-276-4188. It is Ramsey Winch model P1-2. Good teath and shifts good.”
Willys Parts @ Garage Sale Russelton, PA
No pics provided.
“JEEP CJ5,CJ7 Willys Parts
196 DEER CREEK VALLEY RD JUST PAST BENJAMIN ST
The house with Santa claus In the jeep @ Christmass”
http://pittsburgh.craigslist.org/gms/3178928612.html