Blaine spotted these rims for sale.

https://spokane.craigslist.org/wto/d/spokane-jeep-renegade-15×8-factory/7768633434.html

“I have this set of 4 very cool and very rare 1970 jeep renegade wheels. They have the 5×5.5 wheel pattern. I bought them for my 59 ford f100 but will not work for what I am doing. They will fit Jeep. ford, international scout. They are in very nice shape.”

Here are some slot rims at a reasonable price. They appear to have some Knicks.

https://www.facebook.com/marketplace/item/779992723856996

“I have a set of four old school mag wheels from an old Willy’s jeep. They are in pretty good shape. 5on 5.5, with large center hole to clear the hub. I believe they’re 15”x 10” What you see is what you get.”

Winston has these rims for sale. If interested, contact him via email at wrw1959 @ gmail.com (remove spaces around the @ before emailing).

“I have some Kelsey Hayes wheels for sale. Have 5 total. All are 4.5″ x 16″..3 have the flat edge on center hub, and 2 are just the rounded center hub. Have included pictures. Will sell them for $75 + shipping. Prefer not to sell them one at a time, but might discuss with someone. Also have some true heavy 5″ x 16″ Kelsey Hayes truck wheels, if I can’t find 2 more to make a set…might just sell the 3  I have which are nice solid wheels.”

John spotted these four rims that look in reasonable shape.

https://www.facebook.com/marketplace/item/904758524329546

“One set of wheels left for Willys Jeep to sell. These have no tires on them. Good around valve stem area and lug nut areas.”

Maybe someone can use these?

https://www.facebook.com/marketplace/item/884726433078458

“Up for sale is a complete set (4 plus your spare) of vintage steel tire rims. Size is approximately 9×16. Standard flat fender jeep brake drums are 9 inch drums with a bolt pattern of 5 X 5.5”. These rims will fit any jeep made from 1941-1960’s. These came off a 1948 CJ2A I restored a few years back. I went back to factory size on that jeep so I had these left over… All 5 rims are in solid condition and will hold air no problems. They have typically type surface rust you would expect to find on a vintage steel rim but they are straight and again, will take new tires with no issues. I sprayed on a coat of black paint a few years ago just for added protection. I’m guessing new owner will blast them down metal and start fresh so I haven’t put any time into them other than a good pressure washing. Rims have been stored inside my shop so they have been out of the weather since I’ve had them. Price is $250.00 bucks firm ($50 each) and not looking to trade. Cash is king. Make note I’m happy to meet up in Oregon city by the high school so you don’t have to make the long drive out to my shop. PM me for any questions or if you want to set up a time to meet. Good solid set of rims that are ready for mounting on your vintage rig. If you are looking for original size rims for your flat fender jeep, let me know as I have dozens available…”

UPDATE: **SOLD** Was $100.

Blaine spotted these for sale not too far from me. Maybe someone can you them?

“Original Military Rims and Tires of Willies/CJ5. Asking 100 OBO”

Not a bad price for 5 w/ tires.

https://sfbay.craigslist.org/sby/pts/d/san-jose-kh-willys-wheels-5×55/7597305530.html

“5 15″ Kelsey Hayes wheels with tubes off my CJ2A. These are getting harder to find. I would keep them but they don’t fit my application. Only 4 pictured but I have a set of 5.”

Maury shared a link to these two rims.

View all the information on eBay

“Pair of 15×8 Original Kelsey Hays OEM Steel Wheels for 1970 Jeep CJ-5 Renegade 1. Listed as 2 separate items for shipping purposes. Photos depict both wheels.

15×8”, 5 on 5.5” bolt pattern with 3.75” backspacing. Very good condition, rare factory wheels for 1970 CJ-5 Renegade 1. Have all markings and original part number label visible on one wheel. Part number KH 79005.One wheel has been completely sandblasted the other has been partially blasted (not completed inside the wheel. Both have been primed on wheel face- bare metal elsewhere. Have had these in dry storage many years.

To purchase both wheels, you will need to complete 2 orders. This is the only way I could figure out shipping two separate boxes. Boxes are 21x21x11 and each weighs 34 lbs.”

Harman’s selling these wheels.

https://sfbay.craigslist.org/sby/pts/d/san-jose-kh-willys-wheels-5×55/7585012731.html

“5 15″ Kelsey Hayes wheels with tubes off my CJ2A. I believe these are the ones that are getting hard to find. They will look nice cleaned up, however, this does not fit my application. Only 4 pictured but I have a set of 5. Please text me if interested.”

Someone can use these.

https://inlandempire.craigslist.org/wto/7570127455.html

“Selling a pair of Willys MB or Ford GPW combat wheels.
These are original 40’s military wheels not reproduction
I only have 2
Asking $300”

These should be of interest to someone. Note the top left rim seems to have a flat spot at the bottom of it?

https://portland.craigslist.org/clc/wan/d/oregon-city-full-set-military-combat/7519454446.html

“Super hard to find, original military combat wheels I put this set together over the last couple of years. These are real nice. barely any rust. There are after-market wheels, so don’t settle if you are restoring!
1000.00 cash or trade for morgan silver dollars or something amphibious.”

Maury shared this ad.

View all the information on eBay

“Here we have for sale an Original 1970’s Jeep CJ7 CJ5 Renegade Factory Forged Aluminum Slotted Wheel. This is a rare and highly sought after wheel that was a factory optional wheel for CJ’s back in the day. The wheel is pretty nice and its been off a Jeep for years. The aluminum is in good shape. The lug holes are in good shape. The wheel measures 15×7. There are a couple nicks in the aluminum and around the outer lip where wheels have been stacked on top of it. It should polish up well and be ready to run again.”

UPDATE: **SOLD** Was $400.

“all 4 wheels are very good no rust  , lug holes are good ,valve stem holes are good. just have junk tires on them all 4 look just like the pics below”

This ought to interest someone.

https://allentown.craigslist.org/wto/d/emmaus-wwii-original-16-combat-wheels/7508228439.html

“$750.00 for all four. WWII original 16” combat wheels from a Ford GPW jeep, all split rim. Two tires are damaged, another worn, and the other new with some dry rotting. Lugs missing from one. No visible damage to rims other than surface rust.”

UPDATE: Lee has another set of four slot rims like the ones pictured below.

https://cosprings.craigslist.org/wto/d/pueblo-jeep-bronco-15×7-slotted/7480936710.html

“MAKE OFFER for this vintage matching set of (4) slotted aluminum 15×7’s that are 5 lug hole 5×5.5 inch bolt pattern. The 5×5.5 inch bolt pattern should fit the early and later Ford Broncos and F-100, F-150 Pick-Up Trucks. I believe that theses may also fit Jeep, Jeep CJ Renegade, Jeepster Commando, CJ5, CJ6, CJ2A, CJ3B, CJ3A, and CJ7.

Also, the lug holes look good and the center hole measures approximately 4.25 inches. 5 on 5.5 inch bolt pattern. Back spacing is 3 and 3/8ths inches.
“

These are getting hard to find.

https://portland.craigslist.org/clc/wto/d/oregon-city-15×8-steel-wheels-5×55/7475470418.html

“15×8 Steel Wheels, 4” Backspace, 5×5.5 bolt pattern.
Powder coated black back in ‘07, some rusting coming through the powder coating, will need refinished if want perfect…. Vintage wheels Came off my old GPW, fits a lot of old Jeeps, Dodge, Ford trucks as well as some Geo, Daihatsu etc. Awesome rat rod or 4×4 wheels !!”

Someone was looking for 16″ rims.

https://buffalo.craigslist.org/pts/d/mars-willys-jeep-cj2a-cj3a-wheels/7464077151.html

“I am selling a set of four Willys CJ3A (can also be used on a CJ2A) that are in excellent condition. These have been in an interior storage facility for years and have no rust or the typical pitting. I don’t see any significant areas of rust, etc. These wheels are 16″ x 4 1/2″.

These need a quick blasting and will be ready to paint. I have some older CJ2A wheels and can include a fifth wheel if you need a complete set. Please drop me a note or call if you have any questions. Open to reasonable offers, but please keep in mind that repo wheels of this era run about $180 ea.

I also have a very nice F-134 engine with T90 transmission and Dana 18 transfer case. I will be listing those in a few days.”

UPDATE: **SOLD** was $500.

Maybe somebody can use these?

“4 new (been in storage 40 years) buckshot wide mudders.8.5 wide.850 tread 32.5 tall.p78-16lt 6 p”

Blaine spotted these rims. I think there are 4(?) rims?

https://portland.craigslist.org/clc/wto/d/clackamas-rare-16×9-slotted-aluminum/7357118956.html

“Rare 16×9 slotted aluminum mags 5×5.5 … Old school 5×5.5 wide center hole aluminum slotted mags with lug nuts. I had these on my 1981 Dodge Power Ram. They will fit Jeeps, Dodge, some Fords and a few other 4 wheel drive vehicles. Center hole is 4″ for large hubs.”

Blaine found this ad. It could be a good price on Kelsey Rims.

https://ventura.craigslist.org/pts/d/ojai-jeep-parts/7334956648.html

“1967 CJ 5 parts
7- Jeep cj5 wheels 5×5.5 bolt pattern 2 with tires holding air 25 each
4- Jeep yJ wheels 5×4.5 bolt pattern with out tires
Fly wheel & clutch $75
Exhaust manifold $50
Rear end Dana 44 $175
Front Dana 27 $175”