Doug shared this combo.
https://www.facebook.com/marketplace/item/425061533395825
“Unknown miles was operating but bearings are loose. Selling as core.”
Doug shared this combo.
https://www.facebook.com/marketplace/item/425061533395825
“Unknown miles was operating but bearings are loose. Selling as core.”
Bill’s selling this hard-to-find transmission PTO box. Thanks to Andy for sharing it.
https://www.facebook.com/marketplace/item/1037905381185513
“Go-for-Digger Trenchers were built on Willys and Kaiser-era Jeep CJ5’s duallys from the early 1960’s to the early 1970’s. There has to be a few more of these left out there, maybe one in need of parts…
Power transmission box PTO for a Go-for-Digger trencher with a build date around 1969/1970. As you see it. Spins freely. It’s one of 3 parts that I have left from a resto-modded CJ-5 that I built.
Another part is a correct front bumper with the solid steel bar reinforcement and blade lifting chain. Pics show bumper still attached.
The third part is the full-length set of 3/8” (I think) steel outer frame reinforcements that came on the GFD Trencher (and maybe the backhoe). Better pics soon, but if you know these things, you know what I mean. They are on the floor in last pic.
Pick up in Lancaster, PA.”
At least one combo includes a WARN OD.
https://www.facebook.com/marketplace/item/341621008451582
“Selling 3 engines, 4 gearboxes and 4 differentials for Jeep 1960 or older. Prices vary.”
This setup looks interesting.
https://www.facebook.com/marketplace/item/1318781805420844
“T96-1A 3 Speed With Overdrive Transmission R10B-1E Jeep Willys transmission with a spicer 4-9-67???”
This is a good price. Seller also has other parts for sale, including a Warn overdrive.
https://sfbay.craigslist.org/eby/pts/7531587974.html
“This set up came from behind a small block Ford 302 289 in a Jeep CJ-5
good 3 speed trans with full syncro first to replace your weaker T-90 in your flat fender CJ-2a 3a 3b MB GPW. 10 spline clutch and pressure plate included (no bell housing)
The trans has an adapter to mate Dana/ Spicer model 18 t-case and comes with a broken case with good gears (incomplete)
I have other parts too for good prices, drive shafts, 5 bolt early ford bellhousing, good complete dana 18, dana 20 pto texas pattern, warn overdrive (OD pricey) Ramsey winch. Muncie and borg warner T-10 if you have cash don’t be afraid to ask.”
This may be a good price.
https://spokane.craigslist.org/pts/d/cocolalla-jeep-speed-and-case/7494634784.html
“Jeep T-98 4 speed transmission
Spicer 18 transfer case
Warn overdrive
Was installed in an early CJ 5
Looks good on the inside.
All gears look good and no rust.”
UPDATE: The consensus seems to be that this bolts to the back fo the transfercase like a type of PTO, but no one has recognized it yet.
David picked up this gear box at RFJP’s shop. Anyone recognize it?
Seller is looking for a best offer for this unusual combo.
https://denver.craigslist.org/pts/d/arvada-borg-warner-10-and-18-pto/7439082362.html
“Have a Aluminum T-10 that came with a Willy’s I bought a few months ago. Has the adapter for the T-18 T-case. Also has a old P.T.O.
T-case is missing some parts for the P.T.O.
Trans looks ok inside, Have the side cover removed.
Also Cast Bell for Chevy sb/bb.
Looking for offer on all or part.”
UPDATE: **SOLD** Was $800.
This combo should be useful to someone.
“Motor and transmission out of ‘48 willys.”
UPDATE: **SOLD** Was $500.
Marty spotted this combo.
“T18 transmission with wide radio/granny low. Includes adapter to Dana 20 transfer case. Bought it for my old Jeep but went a different direction. Never ran it, but it was reportedly rebuilt 30k mi ago. Probably at least needs a flush since it’s been sitting in my shop for 2 years now.
$500”
UPDATE: **SOLD** Was $200.
There could be parts value here.
“Original Willys Flat head pulled from 48′ willys pickup. Engine has not been started in several years. Engine only.
AS IS!”
Mark’s got a couple things for sale:
If the tranny is in good shape, this could be worth a look. It’s not the 6:1 version.
https://sfbay.craigslist.org/scz/pts/d/santa-cruz-tranny-t18-4spd/7028005844.html
“T-18 4spd 4:1 1st gear. Also has Dana 20 and adapter for Chevy bell housing included”
Dan shared this one. If you need the comb, this seems worth a look.
https://seattle.craigslist.org/oly/pts/d/olympia-borg-warner-86-3-speed/6831445373.html
“1966 1967 Borg Warner T-86 3 Speed Transmission! Part Number T 86 -1A 4! With R10B -1 E Overdrive! Comes Complete as Shown! Working Condition Unknown! Storage Find! Stored Indoors!”
There should be some value here.
https://bellingham.craigslist.org/pts/d/bellingham-1946-willeys-flat-head-and/6782981230.html
“I have a flat head, transmission and transfer case out of a 1946 willys jeep.”
UPDATE: **SOLD** Was $150.
Mike shared this one. Looks like a good price.
“1952 WILLYS TRANS WITH POWER TAKE OFF , OUT OF PICK UP ,WORKED FINE BEFOR REMOVED”
UPDATE: **SOLD** Were $300/each.
Glenn shared these. Seller has some other trannies, too.
“I have two (2) transmission/transfer case set ups out of early 1946 CJ2A’s for sale.
T90 transmission bolted to Dana 18 transfer case.
One is known to be good, I drove it,
the other is a mystery.
$300 each OBO
All best offers in person only.
Come take a look before making any offers.
Calls only please and not after 8pm.
I don’t pay attention to text or emails ( thanks to scammers).
Google zip 10588 for general location.
Other CJ trannys also available.”
Looks like a good price. There was an overdrive attached, but that has been removed.
“I have a T-98 4 speed Trans and D-18 transfer case from an old Willys Jeep.
IT shifts fine and spins freely, I do not know that service history.
NOTE: The OD does not come with it and is no longer attached, therefore the spur gear, washer, cover and nut are not there.”
UPDATE: **SOLD** Was $1200.
Given the mileage, the tc probably needs a rebuild.
“TRANSMISSION – TRANSFER CASE – WARN OVERDRIVE FROM A 1960 WILLYS JEEP – 57,000 MILES -”
UPDATE: **SOLD** Was $400.
“6 cyl super hurricane, 3 speed trans, overdrive $400. No compression in three cylinders, rolls over with starter . Pick up only.”
UPDATE: **SOLD** Was $600.
Could be worth a look. I don’t quite understand the description though.
“Motor and transmission jeep Willys working good 2 things i take out i have all the miselaneus any?”
UPDATE: **SOLD** Was $250.
Looks like a good price.
“Im tired of tripping over them in the garage, Price is firm. I was told the L4134 motor ran when pulled, it turns over freely. Has manifolds and distributor. the bell housing on the t90 transmission is for an f-head motor I think, has the t18 transfercase with crossmember and skidplate. the engine stand would also go with if you’re interested. I have an engine hoist and a pickup If you need help moving. call or text works best, scams will be ignored,”
Isn’t this a trencher setup?
“Selling as a whole but possibly will separate
Transmission, transfer case, PTO setup, and trans cross member from a 53 cj3b. Will fit many years and models of the older jeeps
Make me a reasonable offer. I know what these parts are worth”
UPDATE: **SOLD** Was $150.
Doug spotted this combo.
“T-90 transmission with a chevy engine adaptor plate.”