Looks like an interesting find with all kinds of extras.
“For Sale: Classic 1947 Willys Jeep, 4 Wheel Drive, 3 Speed Manual, 3 point hitch, PTO, Hydraulics, new breaks, new battery, runs great, drives great. Great find for a collector.”
Looks like an interesting find with all kinds of extras.
“For Sale: Classic 1947 Willys Jeep, 4 Wheel Drive, 3 Speed Manual, 3 point hitch, PTO, Hydraulics, new breaks, new battery, runs great, drives great. Great find for a collector.”
Runs and drives.
“I have a 1954 Willys CJ-3B for sale. This vehicle runs and shifts just as it should. I have owned this Willys for about a year and done the following work.
New brakes (front and rear shoes and drums)
New brake lines
New complete exhaust system
New shocks
New windshield
The previous owner said the engine and transmission was re-built about five years ago. Both work as they should. This one has a three speed transmission with a overdrive. You can keep up with traffic and drive at 60MPH all day. Please see the pictures for more information. This is truly is a nice Willys. Let me know if you have any questions.”
UPDATE: **SOLD** Was $13,500
Looks good.
“1950 Willies Jeepster parked at Nampas 1 2 sellit park & sell lot in Nampa 2919 garrety blvd & Kings corner . Stop in and check it out.”
UPDATE: **SOLD** Was $3500.
“his jeep was used in the film industry. It would be good for a restoration. I had put a new gas tank, rebuilt carb and rebuilt starter and new battery. The electrical has been converted to 12 volts. It also has a Stainless steel role bar with lights. It needs a ring gear for fly wheel. I have the part. I have all the parts that are NOT seen in picture. I am disabled and cannot finish. Done all I can. This jeep deserves a full restore. It has a PTO winch in the back. Needs paint and small amount of body work (hood and driver fender). All original parts also some extra parts that come with it.”
No obvious rust.
“I am selling a 1960s Willy’s Wagon Jeep for $5000.00, it has all original parts. It is in driving condition. Tires are great. cash only…no scams please”
UPDATE: **SOLD** Was $19,000.
Good looking truck.
“1951 Willys Overland Pickup for Sale. This is a full off frame restoration to original. This truck is beautiful with 114 miles on rebuild. Every detail is perfect. This is a must see if you love old Willys vehicles.”
UPDATE: **Status Unknown** Was $9000
“1973 M561 Gama Goat truck
This truck is a beast and should be take seriously. All military issue, recently checked over by a lifelong military mechanic. I can only list some of the awesomeness of this truck so please call.
6×6
All wheel drive
Four wheel steering
Chevrolet 454 V8 engine and 700r4 transmission mated to original T-case
Throttle body style FUEL INJECTION
Custom roll cage
All Aluminum body including trailer
COMPLETE MANUAL SET!!!! worth over 1000!!!
All original MILITARY ISSUE trailer seating, covers, tarps, and GPS computer included
So many extra parts still in original packaging…There are boxes full!!!
Registered, insured and legal to drive on the street, can do freeway speeds”
UPDATE: **SOLD** Was $1950.
(11/26/2014) Looks like the drain holes have been filled, but appears solid.
“1953 Willys Jeep military style 4 cylinder 3 speed transmission 4-wheel Drive. Rusty body but its all there and it runs and drives super great. Newer tires drive it home. ”
Runs and drives.
“1946 Jeep Willys CJ-2A
Original 4 cly Engine
Solid Jeep
Climbs any hill.
5000 obo”
UPDATE: **SOLD** Was $2200.
I’m more interested in that mini-jeep.
“1964 Willys jeep with 4cylender engine &origenal wheels. Comes with xtra size 15 rims and tires runs good”
Offroad only.
“47willys stretched on A 95 wrangler frame fuel injected 4cyl 5speed transmission stock axles thing is a lot of fun NOT STREET LEGAL toy only have Bill of sale and complete pictures of build $3,500 obo located in Whitney Tx call or text if interested”
UPDATE: **SOLD** Was $5000.
“For sale: 1951 Willys Jeep. Runs good and has title. Good tires, new battery, not much rust. Original condition. $5000 obo. No spam.
Jeep 4×4 atv UTV hunting off-road classic antique vehicle mud mule rzr razor gator cool fun farm truck prep per awesome vintage gas motor 4wd awd deer hog hunt ranch military army marines marine man manly tough”
UPDATE: **SOLD** Was $5500
Listed as a 1946, this has some unusual modifications.
“46 Willy JEEP high hood.365 horse 327 v8 Muncie 4speed Warn 8000 lb. winch with CJ5 running gear. Needs clutch.
I bought recently as a “barn find” it had been parked for 30 years. I have changed all hoses, Master cylinder. Clutch slave cylinder. I had the Quadrajet rebuilt and did a full tune up. also have 5 mojock wheels duel tanks and mountable w mounts 2 gas cans. New title, Plates and tabs 11\15 Needs clutch, wiring rechecked and some top repairs. I want to see it done, just don’t have the time. ”
UPDATE: **SOLD** Was $1200.
Has potential for a project.
“1947 Willys Panel truck. Great potential for project hot rod, cruiser, 4×4 ???. Has both barn doors. Rolling chassis. No hood. Front 10 slot clip is in great condition. R/side was cut for window but not thru body lines. Left side has not been touched. This is a factory 2wd chassis. No motor or transmission.
Sold with Bill of Sale & statement of facts only. Unit has been sitting for over 20 years, no current paperwork. ”
Looks like some valune here.
“41 WILLY’S JEEP BEEN PART OF THE FAMILY FOR 70 YRS AND ITS TIME FOR SOMEONE TO RESTORE….NOT A PRO ON WILLY’S BUT FOR THE MOST PART EVERYTHING IS IN TACT BESIDES THE REAR BED IS RUSTED OUT….HAS THE ORIGINAL FLAT 4 ENGINE NOT SURE IF YOU CAN GET IT RUNNING NEVER TRIED.”
No pics provided.
“1946 Willys Jeep needs to be restored or for parts. Running gear complete motor is not there but may be available. Title available also.”
Maybe someone can use this?
http://skagit.craigslist.org/pts/4776785552.html
“Currently restoring a 1943 Ford GPW and bought this tub to replace my original tub that came with my Jeep. Had this tub for a little over 3yrs and was slowly prepping it for my restoration. While restoring the tub I found an original Ford GPW ACM Type I tub, so this one went into storage. Asked several of my Jeep friends if they wanted this tub and got no response, so its going up on here.
MB Parts.
“This is a great start for an MB project. There is a ’46 cj2a frame that is straight, solid and converted to take an MB body. Front and rear axels, leaf springs, two tubs that could be rebuilt, fenders, 2 hoods, windshield frame, inner windshield frame glove box cover and top bows. Comes with a go devil motor that ran when it came out. Also comes with the cj2a front and rear axel, and civilian motor with tranny and transfer case that can be rebuilt. This project could be in rolling chassis in a few hours. I was going to do the build but the time wasn’t available.”
UPDATE: **SOLD**
(10/15/2014) Unusual drag/mud jeep.
“The Problem Child is for sale!!!! Proven straight runner narrowed and lengthened jeep frame. Fiberglass jeep body custom paint. two dot rear and cut bog in the front. dana’s, 300 stall, turn key ready to rip!!! new 454, all new perform parts, added fans and radiator for cruising the dunes. set up for small shot of nos, stands up on command. full time 4×4. mega head turner. got paid to run at local events. Will sell without motor make offer! email with questions.May consider trade for barrel/course jeep/rig”
UPDATE: **SOLD** Was on eBay
Purchased in March of 1967 by the White River Township Fire and Rescue Department in Winchester Indiana, she was used as a brush vehicle in service until 2002. Actual milage in 2002 was under 10,000 miles (I have a letter from Chief Stacy H. Lewis attesting to this). Current mileage is under 19,000 miles.
She has been in my possession since 2010. Partial restoration done by High Lift Jack Co. in the early 2000’s. Between 2010 and 2013 she was disassembled, the engine (original) was taken apart and cleaned and reassembled. All plastic and rubber parts were replaced. A fully integrated custom roll-cage was fabricated with safety in mind. Four Range Rover jump seats with custom headrests are bolted to the roll-cage. The driver and passengers are all secured in the vehicle with 4 or 5-point racing harnesses.
UPDATE: **Status Unknown** Was $5500.
(07/27/2014) Listed as a CJ-3B, it looks to be a DJ-3A, yet has a side gas inlet. I can’t tell if it has a rear inlet. Doesn’t run.
“Was intended to be a project but we have too many happening right now. This will make a great vehicle to use for parts or to restore!”
Greg tells me that a few years ago he was half-heartedly looking for a flat fender when found an old, modified (or perhaps more accurately hacked up) 1956 DJ-3A for sale. He bought it and began a complete refurbishing of the jeep into something he could dependably drive on-road and off-road. He credits Randy Ellers, his boys, and eWillys for a variety of the ideas he employed in his rebuild. The real credit goes to Greg himself, as it looks like he’s done some great work on this rig.
Greg writes, “I had been seeking a flat fender Willys off and on for several years, and had taken to surfing several jeep sites on the net in search of a suitable candidate for my goals.
I wanted something that I could keep true to the character of the Willys, but improve on the dependability and capability over time. When I found my jeep, the condition of the body is primarily what attracted me. The body was in better than typical shape for its age and I thought it would be a good start point for my vision. In fact I thought it would be roadworthy enough to make it a long term project while having fun jeeping it as I enhanced things.
As purchased, it was a 1956 DJ3A body on a late CJ3A chassis with an owner built roll cage, Vintage 8000# Ramsey winch, 10.50 x 31 Michelin tires on 7×15 wheels. After service as a runabout delivery vehicle in/around Auburn, AL, it eventually became an unlicensed farm vehicle for many years. Evidently the original hard top can be credited with limiting typical rust damage.
Shortly after I got it, I rebuilt both the three speed and transfer case. I also found a full set of 4 NOS 11” brakes to significantly improve stopping power. Soon after, I discovered the engine block was cracked so the search for acceptable re-power was on. Ultimately the Chevy 4.3L Vortec and TH350 transmission got the nod.
Over the course of the past 5 years or so, I’ve essentially gotten the jeep close to where I want it both in character appearance and performance. I’ve had it on a few club and Jeep Jamboree events and to date it continues to impress me. While it doesn’t have the creature comforts or modern flex suspension of the newer jeeps, it still does rather well on the trails, and we have loads of fun with it.
Marines used amphibious trucks as a base for this bridge.
“WW2 ORIG USMC PHOTO MARINES USE AMPHIBIAN TRACTORS ON BRIDGE FOR JEEP GUADALCANAL”
One of these sold in 2011 for $142.
“trench art jeep made by me. wwii 50 cal shell for wheels 30.06 for steering wheel. 30 carbine for head lights, all head stamped from wwii I am rebuilding my collection. witch I sold. I am building 3 at a time. takes for ever to find shells.i will be years befor i make any more.”
Steve spotted this on ebay. It sold yesterday. It may reappear as it is a reprint.