Looks in good shape.
https://www.facebook.com/marketplace/item/539410577910480
“1948 willys cj2a. Runs excellent. Stock drive train. Clean but not perfect. Ready for summer cruising or to build for the trails.”
Looks in good shape.
https://www.facebook.com/marketplace/item/539410577910480
“1948 willys cj2a. Runs excellent. Stock drive train. Clean but not perfect. Ready for summer cruising or to build for the trails.”
UPDATE: **SOLD** Was $7000.
Apparently, this jeep flies.
‘”Stretched Ford gpw willys mb on cj7 chassis. Has 360 v8, auto trans, dana 20.. locker in rear, locker in front with disc brakes, power steering and brakes. 4.88 gears on 37″ tires. New front driveshaft, new ujoints. Full cage, new batt, new fuel cell, new front gears, carrier, etc. Removable steering wheel, swing out tube doors. Bikini top. Fast and fun. 7000 obo.. in Los osos ca 93402.. fun crawler and fun in the dunes etc”
This has a bunch of mods.
https://www.facebook.com/marketplace/item/416691679967391
“1943 Willys Jeep 2 wheel drive Small block 383 Chevy Dual tunnel ram high-rise Board 60 over a camel humpheads Roller rockers has old school motor circle track Turbo 400 transmission 513 gears in rearend super scoops on the rear no rust holes or rust in the floors bought steel body kit for $5000 clean solid hard metal military frame numbers I Have lots of time and money so please don’t waste my time $14,000 is a fair price for vehicle like to use for sand drag Jeeps Brand-new five point harness It has a special place where it can be driven on the road for cars shows Downsizing husbands things he can’t drive anymore”
Has a few minor mods.
https://www.facebook.com/marketplace/item/700393524568560
“GOOD WEATHERS COMING CAN’T YOU SEE YOURSELF DRIVING IN THE SUN IN THIS 1946 CJ2a. Original engine and drive train. Warn locking hubs. Stored in doors. Starts and runs. Could use tune up miles in add is a guess”
UPDATE: Price dropped to $4200.
(05/08/2022) A solid looking flattie with some mods that is worth a look.
https://www.facebook.com/marketplace/item/699563547822320
“Hi everyone. This is My 1950 Jeep CJ3A. I’m heading to college this fall and will have nowhere to put this. Message me if you have any interest! I’m not available to show until next Saturday. I will get more photos tomorrow afternoon when I pull it out. I’m located in Logan Utah. Clean title. 4.5k obo
Info: 350 small block T-10 Transmission Twin stick Transfer Case Dana 44 short track axles 5:38 Gears Front and rear lockers 35in tires Rancho adjustable air shocks Fuel Cell Roll cage Pros: Recently rewired with lots of extra circuits for customization Rzr Seats recently installed Cons: Tub is a bit rough Has a backfire due to an exhaust leak”
The front fenders appear custom.
https://www.facebook.com/marketplace/item/705492674021409/
“1951 Willy’s cj2a never lifted original flathead 4cylinder engine new seats and top runs good clear title no trades firm on price! Factory twin stick transfer case Dana 44 rearend”
Not a whole lot of value here.
https://www.facebook.com/marketplace/item/1915110115366316
“Parts jeep. No title. Bill of sale.OBO.”
Has all new body. Restoration is incomplete.
https://www.facebook.com/marketplace/item/269854441967298
“1946 Jeep Willys CJ-2A · Driven 21,722 miles *All new body and fenders *New carb and electrical *All new exhaust *Original go devil 4 cyl. *New engine and transmission mounts *New breaks *New seat frames *Reconditioned windshield and hood *Frame was completely striped and sand blasted. ~Comes with everything seen in the pictures and all the parts to finish it (except the tire dollys).~ It ran when I started the restoration. I just don’t have the time to finish it. All that’s left is to finish installing the new alternator(or reinstalling the old generator-also included) connecting the electrical, and connecting the fuel line. •PLEASE NO LOW BALL OFFERS- THEY WILL BE IGNORED• Located in Mountain House, CA”
Someone installed a Cadillac rack and pinion in this, but it does not work. Unclear how much value is here.
https://www.facebook.com/marketplace/item/3100195273564753
“Does not run Needs work. The body is fine. Don’t appear to have ever been wrecked. Some rust in the compartment under the passenger seat. No brakes. Pinto engine in now but comes with a spare 1948 flathead and tranny. Steering is messed up rack n pinion with a Cadillac column. It comes with a roll cage kit you can install.”
UPDATE: Price dropped to $2500.
(04/05/2022) Assembly required. I see an OD shift lever, but don’t see an OD unit?
https://www.facebook.com/marketplace/item/508494687562724
“1947 Willys flatfender Jeep CJ2A project. Clean CA non-op title. Includes frame, body, overdrive, roll bar, transmission. Doesn’t include engine but I do have a SBC with adapter to the T90 transmission”
UPDATE: Still Available.
(05/21/2022) This has some potential, but does have a little rust in the step. There could be more underneath.
https://www.facebook.com/marketplace/item/534818661456374
“1946 Willys cj2a rebuilt engine trans all new brakes and lines good tread on tires runs great bought from original owner family all stock all fluids just changed also is 12 volt and has aluminum radiator new fuel tank want something newer reason for selling”
UPDATE: Price dropped to $3000
(03/22/2022) This has an unusual power steering setup along with an f-head.
https://www.facebook.com/marketplace/item/542886653970346
“1946 Willys Cj2a. Ca title. Good body, chassis etc. Vehicle is complete minus carburetor..”
UPDATE: Still Available.
(05/21/2022) It’s been refurbed, but it is stuck in neutral for some reason. It sounds like more work on other items may be necessary.
https://www.facebook.com/marketplace/item/719549199216771
“1950 Willy’s Jeep CJ3A Recently finished project Runs great but it is stuck in neutral Comes with Doors, Bimini top, & Original Hood (see in pictures) New as of December 2021: –Starter –Battery –Spark Plugs –Alternator –Front & Rear Lights –Wiring Kit –Gauges –Steering Wheel –Steering Stabilizer –Reupholstered Seats –Powder Coated Roll Cage –Paint Exterior & Interior (Raptor Bed Liner for all interior) Rebuilt as of December 2021: –Distributor –Brake Assembly Needs Work: –Front Bumper hasn’t been painted yet due to bend in the bumper –Gas gauge wiring needs to be checked –Transmission is stuck in neutral. May need a rebuild OR $50 worth of bearings”
UPDATE: Still Available.
(02/17/2022) There’s been some customization to this front clip, turning it sort of into a CJ-3B-looking 2A.
https://www.facebook.com/marketplace/item/515640223243420
“This is a cool rig! It was built over the years by an engineer machinist creative old fella! It has a Ford Flathead V-8! Yup, you read right. It has power steering, an actuated grille with Louvers, a split tail gate, and body exit exhaust etc. lots of ingenuity. It runs and has a title though it’s been parked a bit. Hasn’t been driven in a year or so. It has title also!”
Thanks to Roger for sharing these photos from Saturday’s Willys Rally.
This CJ-5 has a 3-point lift:
UPDATE: Bill Norris shared a few pics of his jeep following the trail ride. It looks like they found a little mud. He said they had a great time.
=======================
Chris recorded a couple more videos. Many thanks to him for doing this!
You may need to tilt your phone or computer sideways to better see this video. This group of drivers is heading out for a trail ride.
This group of drivers is heading out for a road excursion. This one you don’t have to tilt your head…
Thanks to Chris Rutherford for shooting this video showing Friday morning at the Willys Rally. In the video I saw a few familiar folks, including Cowboy near his Jeep truck and Russ’ wagon, along with Barney manning his parts booth.
For some reason, when Chris spins the camera part way through, the video doesn’t spin, so some of the video you have to tilt your head to see. No matter, the effort is greatly appreciated!
This letter, written by PFC Carl W. Eklund in 1943, describes how he was lying under a plane, trying to get some rare rest, when a jeep ran over his legs just above the knees. The injuries weren’t very severe and he felt he’d be recovered after a few days of rest.
Carl went on to serve as an aircraft mechanic in North Africa, then in Italy. In 1945, he received an honorable discharge and returned to Texas. Unfortunately, his brother Rudolph, who was captured in Java in 1942, died in Burma in 1944 while still in captivity.
Carl was living in Kenedy, Texas, as of 1969. I could find no updates about him after that.
View all the information on eBay
Barry published three rare Newgren Lift Service Bulletins created in 1947 by the Newgren Company, sent to him by Keith Buckley. Learn more at Farmjeep.com.
https://www.farmjeep.com/newgren-service-bulletins-may-1947/
Brian shared this video. I don’t have away to embed it here, so you’ll have to view it on FB. The narrator notes that the jeep has been sitting since 1994, but it only required a little oil to make them work again. The narrator concludes that because of this the design was a good one.
My only caveat on that compliment is that near the end there’s a closeup that shows how bent one of the arms is. For better or worse, the bending of the levers has been one of the weak spots of these of this design.
https://www.facebook.com/17841402371748118/videos/1430888580667593/?fs=e&s=m
Closeup of bent lever:
Mike spotted this trencher. It’s not far from him. He said he’d be willing to look at it for someone. I’m surprised this doesn’t have duallies on the back. It does have a rear pto gear box sitting in the jeep as well, so it seems there is some definite parts value here.
https://www.facebook.com/marketplace/item/293517196069024/
“50 – 60’s believe CJ 5 jeep with trencher. Looks like auger in picture but looking at in closely it is part of the trencher. NO TITLE”
UPDATE: Don’t forget the Willys Rally this weekend!
This year’s Midwest Willys Rally is June 03-04 this year. This event takes place at Heuston Woods State Lodge in College Corner, Ohio. Learn more here: http://www.mw-willysjeep.com.
UPDATE: Don’t forget that the Great Willys Picnic is next weekend.
This year’s Great Willys Picnic occurs June 12th, 2022.
“Sunday June 12, 2022 from 9 am – 4 pm at the Wanamaker, Kempton & Southern Railroad located in Kempton, Pennsylvania.
The Willys Picnic will be in compliance with all regulations in effect on June 12th. Be prepared for possible changes from past events.”
This has a variety of updates. This is sitting on a Monte Carlo frame; it appears to have a longer-than-standard wheel base.
https://maine.craigslist.org/cto/d/lewiston-1952-willys/7484088873.html
“1952 willys, 350 small block bored .06 over, muther thumper comp cam 287/305, holly 4 brl. carb. chevy truck rear end. monty carlo frame. less than 200 mi. on motor. this thing is rad/fun!”
Has some parts value at the very least.
https://springfield.craigslist.org/cto/d/verona-1947-willys-jeep-project/7488353520.html
“1947 Willy’s jeep project. Has new tires and tubes on front. Asking $1450 OBO”