Includes a nice looking PTO winch. Has an f-head.
https://siskiyou.craigslist.org/cto/d/yreka-1946-willys-jeep-cj2a/7767443097.html
“Runs Great Needs Some Break parts Finished”
Includes a nice looking PTO winch. Has an f-head.
https://siskiyou.craigslist.org/cto/d/yreka-1946-willys-jeep-cj2a/7767443097.html
“Runs Great Needs Some Break parts Finished”
There’s a lot going on here. It appears to be an M-38A1 body that sits on a non M-38A1 frame. That may have a CJ-3B hood grafted onto an M-38A1 hood?
https://humboldt.craigslist.org/pts/d/miranda-1952-jeep-willys-army-jeep-m38/7759062443.html
“1952 military willys jeep m38 a1, it’s been modified at one time we think it may have been a movie car by the way its done but its neat. I have good spare engine comes with, original one that’s in it sat to long n needs work but I’m sure its probably fixable too. It’s fresh out of a barn, no rust or rot but it’s def been worked. $1900 obo.”
It’s a roller.
whttps://www.facebook.com/marketplace/item/1393206984698770
“Modified Jeep selling as a roller minus motor and tranny and a couple little other things”
No description provided. Steve shared this one. It’s got some rust.
https://hudsonvalley.craigslist.org/cto/d/stone-ridge-1950-willys-wagon/7770677003.html
UPDATE: Price dropped to $5200.
(07/01/2024) This will need work. Owner passed away.
https://boise.craigslist.org/cto/d/idaho-city-cj3b-jeep-willys-1954-ll-body/7767033902.html
“954 JEEP CJ3B LL BODY —-HAS RUN WITHIN THE LAST 4 YEARS, BUT NEEDS A BREAK JOB AND SOME TLC. MOSTLY STOCK AS BEST AS I CAN TELL, HAS CHROME WHEELS WITH DECENT TIRES. ROLL BAR AND LOCKOUT HUBS. I WOULD SAY THE CONDITION IS GOOD CONSIDERING THE AGE COMBINATION WITH THE MECHANICAL WORK. PHOTOS KIND OF TELL THE STORY.
COMES WITH AN OFF ROAD STYLE JACK. MILEAGE IS UNKNOWN. VEHICLE IS STORED UNDER OPEN CAR PORT.
OWNER HAD LOVINGLY REPAIRED AND WORKED TO GET INTO FULL CONSISTENT RUNNING CONDITION, I KNOW I WAS OCCASIONALLY A NON-MECHANICAL HELPER. I PERSONALLY HAVE RIDEN WITH OWNER WHEN WE USED IT FOR HUNTING THE ROUGH BACK ROADS, SO I KNOW SHE HAS DEFINITELY RUN. JUST BEEN SITTING FOR A COUPLE YEARS WAITING FOR THE BREAK JOB TO BE FINISHED.
THERE ARE PARTS THAT COME WITH THE VEHICLE.
Vehicle has clear and clean title in hand.
HOWEVER AND UNFORTUNATELY THE OWNER PASSED FROM CANCER AND HIS WIDOW IS NOT A MECHANIC EITHER. I AM LISTING THIS FOR HER”
UPDATE: Price dropped to $10,000.
(07/091/2023) This is powered by a rebuilt Ford 2.3L.
https://westslope.craigslist.org/cto/d/nucla-1946-cj2a-jeep/7769448891.html
“tle: Clear
VIN: Original data plate on firewall
Upgraded to 12v electrical system. With fuse box.
LED Brake and turn signals.
Electric windshield wipers.
Electric fuel pump.
Electric radiator cooler fan.
Remote oil filter.
Seat Belts
11” brakes with dual reservoir master cylinder.
Saginaw steering with adjustable steering column.
3-speed T-90 manual transmission with Overdrive paired with Dana axles.
Has around 1,000 miles on tires and re-manufactured 2.3L engine.”
UPDATE II: Here is a color version of the CJ-5 w/hardtop that appears in the brochure below. I found this on Flickr. One commenter there noted that, “Reinforced Plastics Corporation was in operation on Martha’s Vineyard from 1952 to 1959. They made these tops as well as other fiberglass items.”
================================
UPDATE from October 26, 2017: Here’s another one of these rare brochures for sale. Thanks to Bill Norris and Derek Redmond for the extra pics. This brochure has been for sale on the same eBay pager for four years. It’s on sale at the moment.
This unusual fiberglass hardtop was created by the Reinforced Plastics Corp. I have yet to see one in the wild. Two journal articles (Chemical Week 1957, Volume 81 and National Defense Transportation Journal 1957, Volumes 13-14) both have announcements for the new top, pegging its inception around mid-1957. Unfortunately, Google will only provide snipped views of these University of Michigan scanned journals. The date of these journals suggests the lister of this brochure is probably wrong about the 1955 date for the brochure.
This February 1956 issue shows repair part kits for wheel cylinders. Unless I am confused, certainly nothing extraordinary, it seems the newsletter is suggesting that CJ-2A, CJ-3A, CJ-3B, CJ-5, CJ-6 and DJ-3A all used the same Wheel Cylinder kits, but actually the DJ-3A, unfortunately, is different from all those.
Andy spotted these three Al-Toys for sale for $4000 or best offer. One pic shows two Al-Toy Fire Engine, but, according to the description, they are not included.
View all the information on eBay
“This Al Toy Toy Collection features a Jeepster, Truck, and Wagon, all in excellent working order. The intricate details of each vehicle will impress any collector or enthusiast. The collection includes toys from various eras, making it a great addition to any vintage toy collection. The vehicles are ready for display or play, and are sure to bring joy to anyone who owns them.”
Andy shared this Louis Marx “Build-Up” plastic jeep kit, which looks a lot like the domestically produced Fix-All jeep. Note that the windshield on this jeep is broken (passenger arm).
View all the information on eBay
“Rear wheel axle plastic support broken missing as picks show plus front windshield one end broken missing.trolley jack missing.there are 5 wheels only 4 tyres. unsure if large red disc is for this?.the bonnet is very tight only opened as far as pics show didn’t want to force as might snap one or both lugs so beware on this.the grey tin lid with number eight will not come with this as I’m pretty certain it’s not for this”
This may be a good price. Paint has been brushed onto it.
https://www.facebook.com/marketplace/item/2247250555614588
“1953 willys high hood cj3b in good condition. My grandpa wanted to get rid of it and told me if I sell it I could use the money towards college. It looks amazing in the photos but it does have flaws. My grandpa painted it with a brush in his garage this bright red and then painted the bumpers and such black. Has some runs in it and isn’t the best but looks better than it did. Has some rust but isn’t the worst. Besides that it runs great, runs smooth. Has decent 33s and a spare also. Comes with winch and a flat tow. I’m no jeep guy so if your really interested you can come take a look”
Barney shared this lefty. Note the plaid half-seat. I believe this is home made; at least, I’ve not seen one quite like this (one of the black and white pics in the ad partly shows it installed).
View all the information on eBay
“This Willy’s had quite a few improvements done in 2017 then it was put into storage until this year. The improvements included: new tires, new top & doors, mew brakes & wheel cylinders, rebuilt master cylinder, new steel and rubber brake lines, new front inner & outer wheel bearings, new muffler & exhaust pipe, new ignition switch, new fuel gauge & sender unit, new spark plugs & wires, & new shifter boot. In 2024 a new battery was installed and a lube oil and filter change was preformed. Compression checked good on all cylinders.
UPDATE: Mike confirmed that this truck is still available.
(08/23/2022) Mike’s selling his custom-built truck. Looks like a nice rig. Text or phone to 530 622 9353.
“302 ford. Turbo 400 leather interior. Camaro front clip. Custom short bed.”
Unsure how much TLC this needs, but it might be worth a look.
https://www.facebook.com/marketplace/item/406021209077097
“1972 cj5 with the 258 inline 6 cylinder, 3 speed transmission and dana 20 transfercases. Runs great, brakes could use some TLC but will stop”
This has been sitting for 25 years, but looks pretty original.
https://www.facebook.com/marketplace/item/796845929319015
“1962 Jeep Fc-170 6 cyl 3 speed manual transmission. Believe to be 55k actual miles. Been sitting since 1999, one family owned. Has a few dings and dents, because it has been used for cattle farming its whole life.Basically all original little to no rust , some minor surface rust in places. Not currently running but engine does currently turn over, believe valves to be stuck. Family wants to start at $14000 ( no real idea of value) cash or cashier check only”
This is a couple hours away from me. It looks promising. This has a V-6 badge, but unclear what engine is actually there.
https://www.facebook.com/groups/1745765262170676/posts/7941967869217020
“For sale 1967 CJ-6 have soft top for it. Had intentions of restoring it but it has sat too long and needs a new home.”
Includes a set of homemade doors.
https://www.facebook.com/marketplace/item/833650635499510
“From what I can tell this is a Sears top. It fits my Cj2A but I’m not sure if it fits the 3A. I went with a full top so I don’t need it. It has one original door and both hinge pieces . I also have included two home made doors( they will need new glass). The home made doors are very stout.”
Sounds like it runs and stops.
https://www.facebook.com/commerce/listing/3470514896426497/
“1947 willys jeep cj2a survivor. Runs great , 4×4 works, warn hubs, has koenig pto winch, new water pump, fuel pump, clutch and a rebuilt starter with new bendix and flywheel ring gear. Has t90 3 speed and dana 18 transfer case. Vehicle does have a Florida title.”
UPDATE: Price dropped to $4500.
(12/30/2023) Needs a little work.
https://www.facebook.com/marketplace/item/473374325394548
“It runs drives and stops, I’ve had it a couple years and just got it up and going. It’s pretty fun just looking for something different. Got some extra parts I never put on also and will send all the original parts taken off. No Tailgate
The good: New Front leaf springs New Fuel Tank, Carburetor, fuel lines, sending unit New Tie rod ends New Tires New Master Cylinder
What needs done: Brakes need adjusted better than what I can do The headlight switch needs put on for them to work Speedometer doesn’t work, but I have a cable for it Fuel Gauge works just doesnt have the face plate Runs fairly well just had an oil change, it does sputter a bit. It does have some rust on the underside of the body, but nothing on the frame.”
It’s a project.
https://www.facebook.com/marketplace/item/842366177451586/
“Straight clean steel body. Excellent condition. No motor have new advanced adapter for small block Ford. If it’s up it’s available. Price is OBO.”
UPDATE: Price dropped to $6500
(06/12/2024) It appears that the indents have been filled in. You can just see front portion of one passenger indent in one of the pics.
https://www.facebook.com/marketplace/item/1222884465371641
“Second owner. Has no odometer so we don’t have mileage on it. Has some extra parts that come with it. Includes a front tow bar. ”
Parts jeep. No word on title.
https://www.facebook.com/marketplace/item/1636936227108528
“$675 OBO WILLYS JEEP CJ3A ONLY HAVE -BODY, FENDERS, HOOD, GRILLE -FRAME -SEATS NO MOTOR OR TRANSMISSION”
UPDATE: Still Available.
(02/07/2024) Lots of stuff here.
https://www.facebook.com/marketplace/item/1722652354892268
“Lots of extra Jeep’s lotta extra parts”
UPDATE: Price dropped to $2500.
(12/14/2023) Doesn’t run. Listed as a 1942, the grille and hood are civilian.
https://www.facebook.com/marketplace/item/666269174974684
“1942 agra jeep tow truck, PTO winch system. It’s been sitting long time doesn’t run fully welded cab with doors tow hitch.  I have the tow bar for the back for the tow truck part. No I will not trade.”
This November 1955 issue points out service bulletin 302 (have to look to see if I have that one), which introduces a new part to repair the column shift mechanism in wagons and sedan delivery vehicles.