To Top

Front Page News from a Colombian Yipao

• CATEGORIES: Features, International • TAGS: This site contains affiliate links for which I may be compensated.

Sebastian was in Colombia last month and saw this amazing picture from a local Colombian festival.  I have got to see one of these festivals for myself sometime 🙂

Unfamiliar with Yipaos?  Check out these videos: http://www.ewillys.com/?p=55703

Or view these pictures: http://tinyurl.com/879wmge

 
To Top

Update on Sam’s Bolt-on Rack and Pinion for early jeeps

• CATEGORIES: Builds, Features, Tips & Tricks • TAGS: This site contains affiliate links for which I may be compensated.

Since sam last reported about the prototype bolt-on rack and pinion system for early jeeps, he has made a few changes to improve the ability to install the system onto jeeps that have been lifted.  He reports that the system is installed on a number of jeeps without any issues.  The system dramatically improves steering at low speeds and at highway speeds.

Finished Install before New Exhaust:

Here is close up view of drag link end:

Arrows point to Borgston Joint and shaft support bearing:

Upper View of Rack and Partial View of New Steering shaft and joint. Arrow indicates new steering shaft and joint:

 
To Top

Wagner-Trac on a CJ-2A

• CATEGORIES: Features, Tires and Rims, Unusual, videos This site contains affiliate links for which I may be compensated.

Glenn spotted these Wagner-Tracs on a CJ-2A.  While it has a CJ-2A body, this is probably  a CJ-5 or CJ-3B frame, because the tracks require a wheel base of exactly 81 inches.  The tracks are one of six produced and bolt onto the axles.

According to the information at the video’s homepage:

“The Tracks were manufactured by a company called “A. F. Wagner Industries Inc.” of concord California. They were made sometime during the mid 60s and there was only 6 sets made and were apparently expensive and thus may be the reason there were so few made. They are called “Wagner-Trac” and were made specifically as a set of tank tracks for a jeep with a wheelbase of 81 inches. The wheelbase is not adjustable so the wheelbase is critical and just like a tank you would have to install turning brakes to drive the Jeep because the steering is null and void as soon as you bolt them on. They are all steel construction so were probably designed for offroad only.”

 
To Top

1948 Flattie Pacific Beach, Ca $4000

• CATEGORIES: CJ-2A, M-38 This site contains affiliate links for which I may be compensated.

This is a mix of M-38/CJ-2A and other parts.

“1948 Willy’s CJ2A Jeep. Has a 1971 Buick 231 V6 with Hedman headers. Manual and electric fuel pump. 2 fuel cells, orignal cell under the seat and a rear 12 Gal cell. Rebuilt steering box, Warn hubs and 31 spline axles a full roll cage. Has a 3 speed transmission with overdrive. Spare tire rack, front tow bar. has an all original steel body, with herculiner bed coating on the interior. Please cal for further info. Thanks 720-999-6102”

http://sandiego.craigslist.org/csd/cto/2828749049.html

 
To Top

1947 CJ-2A Spokane, WA **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $3497

This has some updates.

“Classic 1947 JEEP WILLYS!! This rare collectors car has a fresh 350 Small Block Chevy. Four-Wheel Drive. Only pay liscensing once with this JEEP, because it has Collector Plates! Own a part of American history for only $3497! Come down to Dorsey Auto Sales in the Spokane Valley @ 17815 E Appleway Ave.”

 
To Top

1945? CJ-2A Florida $10,800

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

This looks nice enough, but based on the body and grille, it doesn’t appear to be a 1945 CJ-2a.  Note the odd spring behind the driver’s seat in the third picture.

“1945 Willys Jeep Normandy blue. isn very good body and running condition. Speedometer and hand break do not work. everything else is fine. Questions are welcome 863 640 5001. (Sorry no trades at this time) Located Lakeland florida. I can assist with shipping in the US and Canada. Thanks for your interest.”

http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=230734810464+&item=230734810464&lgeo=1&vectorid=229466

 
To Top

1946 CJ-2A Grants Pass, OR **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $6500.

“Good running condition. Painted yellow, short black canvis top and bed cover. Seats are black and yellow tuck and roll.”

 
To Top

Wagon Parts Kuna, Id

• CATEGORIES: Willys Wagons This site contains affiliate links for which I may be compensated.

Flint has a bunch of parts for sale.

“Have a few different 50’s up hoods, lots of side glass and inner window frames. Also have some glovebox doors and under seat doors. I have 1 wing hood ornament, some taillight lenses
a extra tailgate and window frame, and some exterior door handles. I have a full set of seats (need recovered) and a extra fender and grill. Not sure about price, make offer. call 208-371-zero826”

http://boise.craigslist.org/pts/2826555487.html

 
To Top

1962 Wagon Centerville, Ut $3300

• CATEGORIES: Willys Wagons • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  Price dropped to $3300

(08/20/2011) This might polish up nicely with a little work.

“1962 willys Wagon. All stock with 226 Super Hurricane, Ramsey winch. Starts and runs good. Body is in pretty good shape, floor pans are still solid.”

http://saltlakecity.craigslist.org/cto/2829997212.html

 
To Top

1943 GPW Central Wisconsin $7500

• CATEGORIES: GPW (Ford MB) This site contains affiliate links for which I may be compensated.

This appears solid.

“1943 JEEP
I’ll put a short dissertation together.
It is a 1943 GPW Ford Jeep. Bought it in Colorado in the mid 70s and did a minor restoration on it ,it ended up in central Wi in a garage for 40 years.
Went through the drive train etc. It runs very nice, all gearing is good,the body had some rust in the bed behind the seats so that was removed and installed checker plate. The job was done right. Ther is NO rust on this jeep.
It still has the 6 volt system as well as the Willys 4 cyl flathead engine. Runs smooth and quiet It has black out lights in the front along with the blackout dash light switch. All dash instruments are stock.
I have a fair amount of extra parts like a couple of “jerry” fuel tanks, a NEW water pump, stock seat and CJ2 grille, front drive shaft etc.
I live in central Wi
Now for the not so good news but honesty anyway. The Wi. Title calls it a 1947 but as you can see it has no tailgate, 47s did someone at the DMV screwed up and was never caught but the serial # is correct as seen on the frame. Qs just ask

*** WILL NOT RESPOND TO SCAMMERS EMAILS IN ANY WAY. WILL NOT CLICK ON HYPER LINKS IN EMAILS. ***
**PLEASE INCLUDE YOUR PERSONAL EMAIL AND PHONE NUMBER TO RECEIVE A RESPONSE** ”

http://appleton.craigslist.org/cto/2830302954.html

 
To Top

1961 CJ-3B Liberty, KY **SOLD**

• CATEGORIES: CJ-3B • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1000.

There might be some value here.

“This 1961 Willys Jeep has been parked without being started for 5 years. It was driven to the spot where it is now. Has all running gears, trans, transferr case, axles etc.
Everthing is still on motor. Jeep ran good before being parked. Transmission is gummed up and stuck where it has been sitting for so long! Has 2 original fuel cans.
No top or doors! Windsheld in great shape! Body very rough. Everything else would be great for parts. HAVE TITLE!! This was my Dads Jeep. He gave it to me when I moved to KY. to use on our farm. If not sold I will restore it myself at a later date!”

 
To Top

1942 MB? Couer d’Alene, Id $800

• CATEGORIES: MB This site contains affiliate links for which I may be compensated.

There appears to be value here.

“1942 Willy’s Jeep for sale. Needs work! Contact Jason @ (208) 691-5289.”

http://spokane.craigslist.org/cto/2831849889.html

 
To Top

1964 CJ-3Bish San Fernando Valley, CA **SOLD**

• CATEGORIES: CJ-3B • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2700.

(01/30/2011) I thought this hood solution was an unusual way to deal with the longer frame.  I’m wondering if the frame is from a CJ-6?

“Selling my 1964 Jeep Willy X Flat Fender CJ-3A that has a new 390 V8 Offenhauser Engine. The engine has about 15,000 miles on it. It is a beast of an engine. You may want this jeep just for the Engine and parts to put into something you’re working on. this engine would be great for any hot rod or racing vehicle. The jeep is in great running condition and has alot of power. A great off road vehicle. It also looks really cool and has custom body work. I bought this jeep with the intent of driving it and fixing it up, but i haven’t had the money to do alot, i’ve done a few things, but it’s time to get something different to drive. I don’t want to put any more money into this jeep and second I need to get a different car. I have a family now and need something with doors lol. This jeep has power steering, tilt wheel, new dash with new dials, 3-speed transmission, locking hubs, nice rims with Pirelli tires. I’m asking for $2700 or best offer. I am also willing to take a vehicle trade. If you have something, show me and we’ll go from there. Cash is preferred though. Available to see anytime. Msg me for more info. Will answer back immediately.”

 
To Top

1947 Wagon + another wagon Calaveras County, Ca $1500

• CATEGORIES: Willys Wagons This site contains affiliate links for which I may be compensated.

UPDATE:  Still Available

(11/09/2011) This looks like a good price.

“Rare 47 Willys panel and extra parts truck needs work but very solid roller no engine or trans.
Call 209-256-3435”

http://goldcountry.craigslist.org/cto/2829267395.html

 
To Top

1952 CJ-3A Golden, CO **SOLD**

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $8500

(10/09/2011) Looks solid.

“-1952 willys
-2 year restoration
-70’s front and rear axles 4.88 gears
-overdrive t86 3 spd, 29t rebuilt
-dana 20 twin stick
-231 buick rebuilt
.010 x .010 crank
melling oversized oil pump
40lb flywheel
new clutch
new cam, lifters, heads
new valves
new pistons .30 over
new water pump
new timing chain
-original glass turn signals
-custom built headers, hedmans.
-complete new twin exhaust, turbo mufflers
-zero rust body, truck bed lined inside
-tach, new gauges all work
-original heater new motor
-rebuilt e brake system with original lever
-all new metal brake lines
-new hoses and belts
-70’s cj5 radiator
-chevy saginaw steering kit
single lever cherokee colum
borgeson steering joint
-new wheel cylinder and brakes
-oversized brakes 10.5
-custom racing bucket seats
-4 point harnesses
-nagahyde bikini top
-12v, new battery
-mustang tail lights
-complete american wire kit
-4 inch rearched springs
-twin master cyl
-full rollcage”

 
To Top

No Updates tonight (Wed Evening)

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

Updates tomorrow.

 
To Top

The Jeep Guy Resotrations from Scranton Pa

• CATEGORIES: Features • TAGS: This site contains affiliate links for which I may be compensated.

For a while I’ve run across Craigslist Ads for “The Jeep Guy Restorations” out of Scranton, Pa.  Well, before I had a chance to contact him to learn more, the owner Bob Foster contacted me.  He shares his history and provided some pictures.  You can learn more about his restoration ship on Facebook:  http://www.facebook.com/pages/The-Jeep-Guy-Restorations/273113772733381?sk=info  Thanks for sharing your story.  If you want to contact Bob, call him at 570 347-8998.

Bob wrote, “I inherited the business from my dad. He started the business in 1957. At first, we only did general repair work, but in 1963, my dad added bodywork and painting to our services. I helped him at a young age. Soon, I learned the fabrication of metal panels from my grandfather, who was a blacksmith that worked on the Erie locomotive shops here in Scranton, the anthracite capitol of the world. As a blacksmith, my grandfather even made his own tools. He passed down to me his knowledge of metalworking.

I started to help with the bodywork in earnest around 1969, eventually taking over the painting and bodywork. Most of the work was rust repair and full paints. Also, over time, I started to modify vehicles by cutting and shortening truck frames, adding dump bodies, making wreckers, and adding winches. I bought my first 4-wheel drive Ford in 1974 for $4,800 brand new. I still have it—I turned it into a wrecker. At my dad’s garage, we worked on Jeeps over the years, but not in large volumes. Not too many people in Scranton owned them in the 60s or 70s. To add to that, my dad did not like Jeeps: he had the impression that they did not hold up well.

In 1979, we bought a gas station, and my brother Ronnie joined us in running it. However, I had to oversee it and run the other shop, too. We later sold the station and bought 1 acre of commercial land, where I built a 40x30x16 garage for truck repairs. I still run out of the garage today. I added state inspections to the garage’s services in 1990. For most of the 90s and 2000s; truck repairs, vehicle inspections, bodywork, restorations, and modifications took up the bulk of my time.

However, in 2006, my wife and I were looking at projects that the boys at our church would enjoy, so I got the idea to find an old Jeep and work with them on it, getting it to run. So I advertised on Craiglist for an MB or CJ2A, and a young guy named Michael called in response. He lived about 20 miles away from Scranton, so we took our trailer and the boys along and bought one of his 40s civilian Jeeps. Michael is a WW2 reenacter, so he had his other Jeep painted OD green. It gave me the idea to do the same with ours.

Over time, WW2 and Korean War veterans that were my customers would come to the shop and tell stories about the Jeeps they drove in the War. As they grew older, I started to lose them as customers. However, because of their stories, I found a passion in restoring the Jeeps to remember the GIs that drove them. So after that, I bought two more Jeeps—they are like potato chips. This is the story of how I discovered my passion for army MBs and civilian Jeeps. They are a tribute to the men who drove them and worked on them.

As we were working on the Jeeps, getting them in running condition, people learned about my project. A worker at a local auto supply shop, an army veteran, told customers that had Jeep problems, “Go to that Jeep Guy over there. He’ll be able to help.” And the name stuck. For 40 years, I’ve worked on all types of vehicles, but now I’m looking to focus on Jeeps, both the old and the new.”

Here’s a project:

Here is another finished project:

Continue reading

 
To Top

Wooden Jeep in Chateau in Europe (France I think)

• CATEGORIES: Features, Museums, Unusual, Wood bodies This site contains affiliate links for which I may be compensated.

I spotted this on Flickr.  I thought it was the same wooden jeep that was spotted in France here, but I think this is a different one (the jeep below only had 8 slots, while the one in the link above has 9 slots).

http://www.flickr.com/photos/7430965@N05/4961130135/#DiscussPhoto

According to the photographer Spottedlaurel, “There was a ruined Chateau just outside the village near where we stayed, and in one of the beautifully refurbished buildings there was a museum full of life-size things made from wood. F1 car, tractor, motorbikes, all sorts of things. The bonnet lifted up on this to show a wooden engine inside.”

 
To Top

1947 CJ-2A Wichita, KS **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $6000

This looks good.

“Great trail jeep. Buick V-6, 3 speed with OD and Hi & Low gears. Dana axles, rear locker. Full and half soft tops. New winch. New wheels and tires. Power brakes. Power steering. Tilt steering wheel.”

 
To Top

1947 Parts CJ-2A Central City, Ne **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $500

I’m not sure there is much value here.

“i have a 47 willys jeep project or parts rig for sale, missing hood, no title, has trans and transfer, floor had been fixed at one time… comes with f head engine.”

 

 
To Top

1948 CJ-2A Las Vegas, Nv **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** was $2000.

This looks good for the price.

“I have a 1948 Cj2A willys jeep for sale
, 4 cylinders, 4×4, power steering, new alternator, new tail-lights, and it runs (4 extra ORIGINAL rims, and an extra ORIGINAL seat on the side, the extra rims and seat comes with it too) NO ROLL-BARS (sorry) SERIOUS BUYERS ONLY, NEEDED OUT BY THE END OF THE WEEK!!!”

 
To Top

Year CJ-2A Kansas City, Ks **SOLD**

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2100.

This includes an overdrive.  I’m surprised this didn’t sell for $2500.

“I listed this Jeep a number of weeks ago for $2500, a very reasonable price, I thought. Several people looked at it but it didn’t sell. I have too many cars and even too many Jeeps. I need to find a new home for this post WWII Jeep. It has original four cylinder motor that was rebuilt at some point, new tires, an after market overdrive. ( previous owner used it as daily driver). the engine driven winch has a piece of metal broken off of it so doesn’t work. There had been quite a lot of rust on it. This was repaired with 18 gauge steel welded in. It has new paint. This Jeep will make a fun and inexpensive (compared to a all terrain vehicle) toy or a good working vehicle. I think the carb may need to be replaced or rebuilt because I have to keep choke out or it stalls”

 
To Top

1948 CJ-2A Albuquerque, Nm $2000

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

This looks pretty good for the price based on this picture.

“This willys is 90% complete does run everything works it is very much restorable.Might consider trades,motorcycles,atv,quads,old trucks???????$3.000 if interested email or call 505- 286-2107 thank you”

http://albuquerque.craigslist.org/cto/2826805582.html

 
To Top

1950 Wagon Bulverede, Tx **SOLD**

• CATEGORIES: Willys Wagons This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1200.

The passenger side front tire looks nice.

“PLEASE ONLY SERIOUS BUYERS !!!!!!!!  1950 STATION WAGON WILLYS JEEP , SOLID BODY, HAS MOTOR, (NOT RUNNING) $1200.”

 
To Top

Willys Collection Oklahoma City, Ok $2500

• CATEGORIES: CJ-2A, CJ-3A This site contains affiliate links for which I may be compensated.

No pics provided.

“1950 cj3a needs engine and trans installed have both ! 1953 cj3a project , 2 1947 cj2 tubs in rough shape ,, i have frames transmissions transfercases axles a couple of engines i have acomplete TRW engine rebuild parts rods,pistons,valves oil pump fuel pump stil in the box. I have ametal hard top with doors ,also apickup cab top that will fit the cjs,fenders hoods a rollcage radiators,grills and alot of misc. parts. Would like to sell as package contact me if interested call or txt 405 509 4847 thanks!”

http://dallas.craigslist.org/dal/cto/2826974844.html