To Top

1949 CJ-3A Berryton, Ks **SOLD**

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $650.

(01/03/2011) “1949 Willys Jeep, needs complete restoration.”


 
To Top

1946 VEC CJ-2A Cleveland, Oh **SOLD**

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $29,000.

(11/30/2010) Bob spotted this really nice original restoration.  I’d like to see some better pics.  I also really like the color scheme.  I do have a couple minor, really minor detail questions pertaining to originality.  Wouldn’t the bezels have been painting the body paint color (though I think they look better in black)? Also, wouldn’t the rear bumper have had the dropped PTO connector angle (though I like the looks of the bumper that was installed on this)?

“Early production column-shift model 20670.
Ground-up restoration to original condition. The jeep has the original 134 cid in line 4-cylinder engine, column-shift T90 3-speed manual transmission and transfer case. Every piece on this classic Jeep has been disassembled, media blasted and rebuild, reconditioned, or replaced to achieve its as new condition. This Willys has been finished in the correct Harvest Tan color with the corresponding orange wheels. ”

 
To Top

1954 CJ-3B Lufkin, TX **SOLD**

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD**  Was 800.

(01/03/2011) Real rough but really runs.

“1954 willys jeep 4×4, 4 cyl. F-head, overhead valves, runs good, 4 wheel drive works good, no brakes, headlights work, windshield has hole busted in it, just an old jeep with typical maintenence needed, could use some new points, plugs etc, had it on my deerlease for yrs, replaced with 4 wheelers, need to sell it,has hi and low range with 3 spd tranny, tires has decent tread but dry rotted, good enough for off roading though, gas tank is a “6 gallon boat tank” sitting in the back, make a good deer lease or farm/ranch vehicle, no title, might be able to track it down though, i dont know, selling as is, will start and drive onto your trailer, remember “no brakes” lol, thanks for looking. Location is Lufkin Tx, about 120 miles north of houston and 80 miles south of tyler tx”

 
To Top

Pounced: Biscuit Finally Has Its Name

• CATEGORIES: Biscuit, Features, How To This site contains affiliate links for which I may be compensated.

It was sometime around mid-summer of last year (maybe earlier) when I started the project to place ‘Lost Biscuit’ on the hood of my jeep. It took a little longer than expected, but I finally did it.
First I had to decide which font to use. Fortunately,  I got some very helpful input along the way from Dexter (thanks) and eventually decided upon the Marker Felt font. Okay, that was pretty easy.

Now, how to get the name on the hood. After hmming and haaaing over how I wanted to attach the name (hand drawn, stickers, stencils, pay someone else … ), I finally decided I would do it myself using paint.  But, I knew my freehand drawing and painting skills froze around the 2nd grade, so this wasn’t something I could improvise. Since I had no immediate solutions, I decided to put the project on hold (which explains the delay).

One day this past December I was watching American Restoration on the History Channel.  The American Restoration show is a spinoff of sorts from the Pawn Stars show and follows various restoration projects from Ricks Restoration out of Las Vegas.  In one of the episodes, called Buttered Up (you can view it here), Rick restores an old popcorn machine.

To repaint the front of the popcorn machine, the painter used a technique that dates back centuries called pouncing. Pouncing? My ears perked up!

Pouncing?  Never heard of that. As usual, my computer was on my lap so I instantly googled pouncing.  I learned,

Pouncing is where pounce — loose graphite or charcoal — is rubbed through a series of small holes punched in a paper pattern to transfer the design to an item to be decorated

Well, I thought that would work for Biscuit’s name.  After some more research, I found out that quilters use pouncing for some stitch patterns.  So, the next day I hit some quilt stores.  As you can imagine, the conversation went something like this,

“Hi, I’m here because I want to paint a name on my jeep,” says I.

Blank stare from cashier, “what do you need?”

“I need stuff for pouncing” says I, remembering now that I probably had not shaved, maybe, not even showered, and most likely wasn’t quite dressed like customers they normally help (however, to my credit, I didn’t have on my garage jeans).

Another blank stare, “you want to do what?” I think she even had her finger ready to dial ‘9’ (and then ‘1’ ‘1’)

It turns out, not everyone knows what pouncing is, even at the quilt stores.  Eventually, after visiting a couple quilt stores, I found what I needed (you will see my pouncing supplies in a picture below).

Here’s the synopsis of this project.

1. Design and Print the template.  Then, since I didn’t have a good awl, I created my own awl out of tape, a chopstick and a long push pin.

2. Next, I attached the template to a piece of cardboard.  Then, I poked holes around the outer edge of all the letters.

3. With the letters outlined, I tested out the template on different materials to make sure it worked.  It turns out pouncing is pretty easy!

4. Selecting paint was the next step. So, I visited my local art supply store and explained to them what I wanted.  They directed me to an Acrylic Titanium White Tube from Windsor Newton. Along with the paint, they also suggested an acrylic spray on sealer and finisher from Americana. I took the paint home and tested it on different materials.  At first, I didn’t like it, because it wasn’t as smooth as the typical oil based house paint I had expected.  Instead, it had texture like a canvas artist would want.  But then, after staring at it a bit, I warmed to the texture, because it gave the name a hand generated feel.

5.  Yesterday, with the weather a little warmer, it was time to paint the name.  I got out my template, my paint, and my pouncing supplies.  I taped the template to the hood and prepared to pounce.

Over the course of my tests, the technique I found most successful for pouncing was not tapping the pouncer, but rather dragging it slowly across the holes.  This kept the paper from popping up and blurring the dots underneath.

The pouncing equipment consists of a pouncer with a ‘handle’ on one side and a soft side on the other.  There’s also a plastic container that can hold pounce.  Lastly, there is the white chalk.

6.  Now it’s time to paint.  I put three coats on each side. This image was taken after the first coat.

This is after three coats.

There is still some small edges that need cleaning up.  Once I do that, I’ll spray it and hopefully that will protect it!

 
To Top

1947 CJ-2A heater $1000 … yes, really!

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

I thought this was worth a laugh.  Yeah, the price is $1000!

“I have an original 1947 willys heater that i want to sell. i was told its worth a thousand dollars. any questions please email me”

http://phoenix.craigslist.org/cph/pts/2318768400.html

 
To Top

1942 GPW Westminster, CO **SOLD**

• CATEGORIES: GPW (Ford MB) • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $1900

This has a fiberglass body.

“My loss is your gain!!!!! To many projects not enough time time for this to go. Use the parts on your jeep or finish this one. No title bill of sale only File folder of receipts and GPW literature.

1942 Willy’s/Ford GPW frame sand blasted repaired and quick black epoxy spray job
GPW Grill, headlights and hood (classic look)
Kevlar/fiberglass Shell Vally Tub and fender (ok Shape) Some holes miss drilled on the interior
2 Blow molded racing tub seats and covers
full Roll bar 90% done
New single piece windshield frame and the original 3 piece frame needs work
Go Devil 4 Engine runs great new Carburetor and gaskets, Re-cored radiator, Centech wiring harness, Saginaw steering conversion,
New transmission, rebuilt transfer case,
New Warn Premium Hubs,
New steering knuckles-kingpins and seals.
New 11″ drum brake conversion, and master cylinder
New Rancho springs and shocks, Con-Fer shackles
Rebuilt drive shafts
Set of 5 Autometer gauges”

 
To Top

Year? CJ-3A Eastern Oregon, $500

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

Includes a rear PTO.  No pics provided.

“For sale is a Willys CJ-3A jeep. No title, no motor. Body is fair, frame is pretty good. No seats. I was going to rebuild it, but, too many projects “on the fire”,,, I also have a bunch of Willys parts for sale, including flat head motor,(would work in this CJ-3A) rear PTO, body parts (for CJ-2A and CJ-3A, and a few CJ-5), small parts, seat frames, parts for a M-38A1, a fully rebuilt flat head motor, small parts, gas tanks, gauges, rear draw bars, roll bars,,, Love to sell it all as a package.. I am also planning on selling some restored CJ-5’s in time. Thanks !”

http://boise.craigslist.org/cto/2318266866.html

 
To Top

1955 CJ-5 Rockford, Il **SOLD**

• CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.

UPDATE: ** SOLD**A reader named Mark purchased this  rig.

This seller must sell.  There’s some value here.  I can’t tell whether it is a CJ-5 or M-38A1.

“This jeep is a 2 owner. My neighbor used it for 50 yrs to plow the Court House but got sick and didn’t have a chance to restore it cause he died . He wanted me to have it but I’ve got to go to Phoenix for a heart surgery myself so I’m forced to sell. We ran a rubber gas line into a gas can and jumped the starter and it fired right up and we drove it home. It needs some TLC but did come with a plow and its a project that can pay for its self. It needs body work. I really would love to keep it and pull it behind my motor-home but cant. I have additional pics if interested. I really don’t want to part it out and would like to know it restored. I haven’t changed the title over cause its the oldest title Ive ever seen. ”

 
To Top

1960 CJ-5 Franklin, NH **SOLD**

• CATEGORIES: CJ5 • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2000.

This looks in good condition.

“I’m selling my 1960 Jeep CJ-5. It is a 4 cylinder 3 speed stick and has the twin stick transfer case. It runs well, drives well, all the lights work, 4×4 works great, no heater, no radio… New seats, new windshield frame, new 31″ tires, top was replaced a few years ago… very solid Jeep. This is an old Jeep, which means no power steering, no power brakes, it is pretty much a tractor with a top lol. It cruises at 50 mph all day long and thats about top speed for these old beauties. The Jeep is not perfect but is well worth my asking price of $2000 drive it home send me an email or text me at 6o3 995. 9378 Nate”

 
To Top

1953 CJ-3B Arlington, Fl **SOLD**

• CATEGORIES: CJ-3B • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: Was $3000. **SOLD**

This might make a good project.

‘1953 Jeep CJ-3b
This Jeep is very original. It was purchased by me in Western NC from a man who purchased from the original owner. It was a farm Jeep and has very low mileage considering its age. I looked at 12 other 52-53 Jeeps before I decided to buy this one.

This is why I chose this Jeep:
The bad stuff:
typical rust, but not tons of it- most panels can be fixed easily as everything is flat
no top, but it does have the top frame, and one door
brakes need to be adjusted- the rear wheels lock up under heavy braking
the carb is new but it floods easily- I suspect the needle and seat assembly-some fuel lines need to be rerouted
typical decay of the original wiring harness
needs muffler welded on (I have a muffler)
brake lights are non-original and not working
seats need to be recovered

The good stuff:
it is 99% original
low miles 45K
the motor runs great
the differential works great
the tranny works great
the steering gear works great
the frame is solid
the tires are brand new (have receipt)
wheels were shot peened and painted with urethane (have receipt)
new front window (have receipt)
just about every part imaginable is available with a mouse click or a phone call
it just looks cool

I am selling this , because I have way too many projects , and this would be a great and easy project for someone. I have over $3000 in the Jeep. I will accept reasonable offers. I do not want any trades, as I do not need a divorce. Payment will need to be in cash.
( I am also selling a 1994 Jeep YJ with a 258, ps, pb, Sahara package, new sailcloth top, AM-FM CD, 7″ total lift on good BFG 33’s, Motorcraft 2100 carb swap–needs tuning, needs some work on the CAD front axle actuator as the vacuum nipple broke off $4 part—the paint is very nice with very little rust–witha few more dollars this could be a really nice Jeep—–$4200–I have $5600 in the Jeep—I’ll post pictures soon)”

 
To Top

Parting out 1946 CJ-2A Ramona, Ca

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

Some parts have been sold.  This was a column shift.

very very clean and running all original except taillights and one knob on shifter ,6 volt motor runs perfect and i have video of it driving,3 on the tree short lived option im keeping the tub ,front clip ,and wind shield,this is a civillian modelcall me at 619-813-6073 thanks not m38

engine block transmission seats columne shifter have been sold still have alot of engine accessories and misc snow chains ect call for availability

http://sandiego.craigslist.org/csd/pts/2316155280.html

 
To Top

1942 GPW Tipton County, Tn **SOLD**

• CATEGORIES: GPW (Ford MB) This site contains affiliate links for which I may be compensated.

UPDATE:  I believe this has sold.

Does not run.

“Antique Ford Jeep with the Ford script on tailgate. Motor does not run. Ready for restoration and I don’t have the time.”

 
To Top

1942 GPW Canoga Park, CA **SOLD**

• CATEGORIES: GPW (Ford MB) This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1300

(03/28/2011) This might be a good price.  It sounds like it runs and drive.

“for sale is this 1942 ford willy. i my self havent taken it offroading. i can tell you a few things though, it has headers, a buick v6 engine, and it starts and sounds strong. new battery. the car has been sitting for quite awhile so i would recommend a good run through to make sure everything is good. i have no time for it. it the perfect car for offroading. better than taking 10k dollar jeep out and getting it all scratched. give me a call for info or to come out and see it.”

 

 
To Top

1947 CJ-2A Braddock Hills, Pa $2000

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

PDATE:  Price dropped to $2000

(04/08/2011) There’s still some work left on this project.

“1947 Willys CJ2A
This project is almost complete.
Mechanically this is in great shape. The engine transmission transfer case and differentials are all in great working order. The brake system is rebuilt and they work great. This cj has the original flat head 4 cyl motor and is still 6 volt.
What needs finished is the cj needs painted and re-assembled.”

http://pittsburgh.craigslist.org/cto/2317986465.html

 
To Top

1954 CJ-3B Mesa, AZ **SOLD**

• CATEGORIES: CJ-3B • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $2400.

This might be a good price.

“4 cyl, 3 speed, New Wiring, New Tires, Orignal Rear Seat, 99% Rust Free, No Floor Rust at all.”

 

 
To Top

1950 CJ-3A Yakima, WA **SOLD**

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2500.

The seller wants to make a trade.

“I am selling or would like to trade for a car or rv the jeep has a f134 motor in it a t90 trans t18 t case 538 gears and a 8000 pound winch runs great. for more info please email me with pics of the trade and info”

 
To Top

1946 CJ-2A Boise, ID **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $8000

(02/07/2011) This appears in good shape, though there is a spot of some kind on the hood.

“I have 1946 willys really good shape will trade for vette or mustang 65 years old lol every day driver.”

 
To Top

Wandering Willys Jeep Club Movie Preview

• CATEGORIES: videos This site contains affiliate links for which I may be compensated.

Brian spotted this.  Since we are both ex-members of the WWJC, we admittedly had a soft spot for it.  Apparently, the club makes an annual movie of the year’s events and this was the preview for last year’s movie.

 
To Top

More on this unusual CJ-?A/MB Wagon in Bali

• CATEGORIES: Features, Fire/Police/Industry Vehicles, International, Unusual, Willys Wagons, Wood bodies • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  Rudolf sent some additional pics of this rig. Steve gives a good analysis within the comments section.

Rudolf forwarded me this unusual CJ-?A/MB wagon.  Rudolf reports that this is titled a 1944 and was used for public transit in Bali.  Given the full floating rear end, the rearend might have been from a MB.  It reminded me of another vehicle with a similar wood rear end that is located in France  (see the red image below).

From France (CJ-3B Page, Offroadaction.ca)

 
To Top

1969 CJ-5 Colorado Springs, Co $500

• CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.

The engine runs!  Looks like it might be a good parts jeep.

“1969 Jeep CJ-5, Dauntless V-6. The motor runs, beyond that I cant say anything such as how strong it is. The Gas tank is not connected, so it only fires up from the fuel line connected to a gas can.

Frame is straight, engine is good.

For $500.00 what do you get?

a vintage 1969 Willys CJ-5 ready for a restore or a rebuild to a crawler. A Dauntless V-6 engine that probably needs some work, but not much. Everything else like tranny, transfer case, hubs etc.. Its a rolling vehicle.

For $500.00 what dont you get?

The rims, they can be “borrowed” to get it transported, but I want the wheels and rims back. The seats. The seats in the pic are not included, nor are the mounting frames, however, I have some 65’ish seat frames/seats that will go with it.”

http://cosprings.craigslist.org/cto/2317325077.html

 
To Top

Year? CJ-2A Beaumont, CA **SOLD**

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $200.

There’s $200 of value here. The rims look unusual.

“Willy’s jeep was an off road project that I never started. You haul.”

 
To Top

CJ-2A/3A Parts Winters, Ca

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

No pics provided.

“I have

TUB-rough shape with body and serial# plate.100$
FRAME-fair condition some fabrication done.100$
AXLES-offset read dana44,front dana 27 closed knuckle.4.88 gears.200$ or both 300$
Cj3a windshield perfect glass.50$
FONT FENDERS-ok condition.20$ a set.have 2 sets
DANA 20 T-CASE-good condition.pulled fron 1977 scout II.(aka TC-145)2.42 low range.100$

will have pics soon or can send them.will sell tub,fram,axles rolling for 350$ prices flexable need it gone. Call Josh 530-979-1248”

http://sacramento.craigslist.org/pts/2316959367.html

 
To Top

1942 GPW Seattle, Wa $15,000

• CATEGORIES: GPW (Ford MB) • TAGS: , This site contains affiliate links for which I may be compensated.

Looks good.

“1942 Ford GPW army jeep 4 sale!Orignal tub $15.000 obo email with ?”

http://seattle.craigslist.org/tac/cto/2317367756.html

 
To Top

1953 M-38A1 Boring, OR **SOLD**

• CATEGORIES: M-38A1 • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** $1850.

This looks like a good restoration project.

“Runs and drives nicely with original 24 volt system. Good tires does not overheat just tuned up with new coil carburetor rebuild plugs and points. Pretty straight Jeep with little rust. Has had some panels replaced in past. Sunny California history from estate. Bill of Sale. Includes a bare frame with new springs and Oregon 1953 Title. Selling cheap to raise money to finish my other project. Includes rear military tail lights not shown in picts. More pictures on request.”

 
To Top

1947 CJ-2A Reno, Nv **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE:  A reader bought this.  This was  a VEC with a column shift and a Warn OD! Was priced at $950.  **SOLD**

This might have a VEC body.

“1947 CJ-2A.  Willys Jeep. Driven throughout the 1970s and ’80s. Now it needs restoration. All parts are here. call John at (775) 830-2307. $950.00 obo”

http://reno.craigslist.org/cto/2317332628.html